AmazonBasics B07TWLF9Z2 Bedienungsanleitung
Compound Binocular Microscope
Microscopio Binocular Compuesto
Microscope Composé Binoculaire
B07TWLF9Z2
180
140
120
100
8 0
160
0
170
160
150
140
130
120
110
100
180
190
0
10
20
30
40
50
10
0
60
70
65
75
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3
180
140
120
100
8 0
160
0
170
160
150
140
130
120
110
100
180
190
0
10
20
30
40
50
10
0
60
70
65
75
J
H
I
G
F
C
D
E
A
B
K
L
M
P
N
Q
R
S
U
O
T
AH
AG
4
V
Z
W X Y
AA
AB
AC
AD
AE
AF
5
EN
Parts Description
AEyepiece cover RPower switch
BDiopter adjustment SLocking set
CInterpupillary distance
adjustment TCondenser diaphragm
DHead UCondenser vertical
adjustment knob
ENose piece V4x objective lens
FStage clip W10x objective lens
GStage X40x objective lens
HCondenser Y100x objective lens
ITransmitted light lamp Z10x eyepiece x2
JBase
AA
20x eyepiece x2
KArm
AB
Color filter (green)
LCoarse adjustment knob
AC
Dust cover
MFine adjustment knob
AD
Mirror
NX-axis translation control
AE
Mirror stand
OY-axis translation control
AF
Detachable power cord with
plug
PPower socket
AG
Condenser locking screw
QBrightness adjustment wheel
AH
Stage clip locking screws
6
EN
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use.
If this product is passed to a third party, then these instructions
must be included.
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and/or injury to
persons including the following:
WARNING It is prohibited to disassemble the machine.
WARNING Risk of serious injury! Dyes are harmful by inhalation,
harmful in contact with skin, harmful if swallowed.
Methylene Blue Dye: Avoid eye and skin contact. Causes serious eye
irritation. Do not swallow. Do not inhale.
First aid in case of eye contact: Immediately flush eyes with
excess water for 15 minutes, lifting lower and upper eyelids
occasionally. Remove contact lenses if wearing any. Get
medical attention if irritation develops.
First aid in case of skin contact: Immediately flush skin with
excess water for 15 minutes while removing contaminated
clothing. Get medical attention if irritation develops.
First aid in case of ingestion: Do not induce vomiting
without medical advice. Consult a physician if necessary.
NOTICE Methylene Blue dye has been classified by the International
Agency for Research on Cancer (IARC) as Group 3: Not classifiable as
carcinogenic to humans.
NOTICE Use the product within the correct ambient conditions to
avoid mildewing and damage.
• Keep the work area clean, clear and away from any food storage.
Prepare the slides in a well-lit area and close to a water supply. Use a
solid table with a heat-resistant top.
• Do not allow dyes to come into contact with any part of the body
particularly mouth and eyes.
• Do not eat, drink or smoke in the work area.
• Clean all the accessories and the work area after each use.
Wash hands thoroughly after handling and carrying out
experiments.
7
EN
• A separate tin or bucket should be used for the disposal of specimen
samples and dyes. Any wasted solution should be poured directly
down a drain, but never into a sink basin.
• Dispose of used specimen samples a household trash immediately
after use.
• Do not discard any equipment into the fire to avoid violent
combustion or explosion.
• If the product has to be moved, carry with one hand holding the
product at the arm and another hand supporting it at the base.
• Examine the set regularly for potentially unsafe conditions, such as
damaged housing, or parts. In the event of such damage, the set
should not be used until it is properly repaired.
• Store the set in its original packaging out of reach of children and
animals.
Grounding Instructions
This product must be grounded while in use to protect the operator
from electrical shock. The appliance is equipped with a 3-conductor
cord and a 3-prong grounding-type plug to fit the proper grounding-type
receptacle. The appliance has a plug that looks like sketch A in the figure
below. An adapter, sketch B, should be used for connecting sketch-A
plugs to two-prong receptacles. The grounding tab which extends
from the adapter must be connected to a permanent ground such as a
properly grounded outlet box as shown in sketch C using a metal screw.
Grounding prong
Circuit grounding conductor
connected properly
Metal
mounting
screw
Cover of grounded outlet box
Adapter
Grounding means
A
B
C
8
EN
Symbols Explanation
~Alternating current (AC).
Health advice for emergencies.
Wash hands before and after experiments.
Safety warning. Improper use of the product could result
in injury or death.
Intended Use
• This product is for private use, home schooling, school applications
and teaching demonstrations. It is not for commercial use.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use
or non-compliance with these instructions.
Before First Use
• Check the product for transport damages.
DANGER Risk of suffocation! Keep any packaging materials away
from children – these materials are a potential source of danger, e.g.
suffocation.
Assembly
180
140
120
100
8 0
160
0
170
160
150
140
130
120
110
100
180
190
0
10
20
30
40
50
10
0
60
70
65
75
170
160
150
140
130
180
190
D
K
9
EN
• Remove the cover on the base of the head (D).
• Remove the cover on the top of the arm (K).
• Connect the two pieces together.
• Fasten the head (D) using the screw on the arm (K).
20
180
1 6 0
140
120
0
10
170
160
150
140
130
120
110
100
180
190
0
10
20
30
40
50
10
0
60
70
65
75
E
X
W
Y
V
• Attach the objective lenses (V, W, X, Y) in a clockwise sequence
according to increasing magnification power onto the nose piece (E).
Light source option
20
180
1 6 0
140
1 2 0
0
10
170
160
150
140
130
120
110
100
180
190
0
10
20
30
40
50
10
0
60
70
65
75
AD
AE
I
10
EN
To use the mirror instead of the transmitted light lamp (I):
• Attach the mirror (AD) onto the mirror stand (AE)
• Unscrew the diffuser of the transmitted light lamp (I) from the base.
• Screw the mirror stand (AE) onto the base.
NOTICE Using the mirror does not require electrical connection.
Operation
Switching on/off
• Connect the power cord (AF) to a power outlet and the other end to
the power socket (P).
NOTICE To prevent the bulb in the lamp (I) from burning, turn the
brightness adjustment wheel (Q) setting to the lowest before turning on
or off.
• Flip the power switch (R) to “I” to turn on the lamp (I).
• After use, flip the power switch (R) to “O” to turn off.
Calculating magnification power
Total magnification power is calculated by multiplying the magnification
power of the eyepiece and the objective lens.
Eyepiece
magnification power
Objective lens
magnification power
Total magnification
power
10x (Z)
4x (V) 40x
10x (W) 100x
40x (X) 400x
100x (Y) 1000x
20x (AA)
4x (V) 80x
10x (W) 200x
40x (X) 800x
100x (Y) 2000x
Inhaltsverzeichnis
Andere AmazonBasics Mikroskop Handbücher
Beliebte Mikroskop Handbücher anderer Marken
Thermo Scientific
Thermo Scientific Nicolet iN10 Leitfaden
National
National DC3-163 Bedienungsanleitung
KERN Optics
KERN Optics OPE-1 Bedienungsanleitung
OPTIKA MICROSCOPES
OPTIKA MICROSCOPES B-150D Bedienungsanleitung
Prior
Prior Lux POL Bedienungsanleitung
Opitec
Opitec Smartscoop 115615 Bedienungsanleitung
VWR
VWR VisiScope 384 Series Bedienungsanleitung
Leica
Leica DI C800 Handbuch
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Bedienungsanleitung
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Bedienungsanleitung
Olympus
Olympus SZ61 Bedienungsanleitung
Leica
Leica FL560 Bedienungsanleitung