American DJ Color Fusion Bedienungsanleitung

User Instructions

American DJ®

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

Color Fusion Introduction

©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 2

Rev. 7/06

Unpacking: Thank you for purchasing the Color Fusion by Ameri-

can DJ®. Every Color Fusion has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your ﬁxture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without ﬁrst contact-

ing customer support.

Introduction: The Color Fusion is part of American DJ’s continuing

pursuit for creating high quality affordable intelligent fixtures. The Color

Fusion is a DMX intelligent stage wash. This unit is light weight and

compact which makes it a great piece for mobile DJ’s and clubs. This

unit can be used as a stand alone, sound-active unit or in a Master/

Slave conﬁguration. The unit can also be controlled via DMX controller.

For best results use this unit with a fog machine to enhance the output

of the beams.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Paciﬁc Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or ﬁre, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ®.

PLEASE recycle the shipping carton when ever possible.

American DJ®

Color Fusion Safety Precautions

©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 4©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 3

• 3 Colors with Various Chase Patterns • DMX-512 protocol

• Electronic Dimming 0-100% • Fan cooled

• Strobe and Speed Control • Color Mixing

• Uses Seven DMX Channels • Built in Microphone

• Easy Lamp Replacement • Barn Doors

Safety Issue: This unit may blow a fuse if the maximum allotted load

of 15 amps is reached. If the fuse needs changing, please see the fuse

replacement guidelines on page 10.

• To reduce the risk of electrical shock or ﬁre, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and ﬁre in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 3 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Color Fusion Warranty Registration

The Color Fusion carries a 1 year (365 days) limited warranty. Please

fill out the enclosed warranty card to validate your purchase and war-

ranty. You may also register your product online at www. americandj.

com. All returned service items whether under warranty or not, must

be freight pre-paid and accompany a return authorization (R.A.) num-

ber. If the unit is under warranty you must provide a copy of your

proof of purchase invoice. Please contact American DJ® customer

support for a R.A. number.

Color Fusion Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. Please keep this manual

with the unit, for future reference.

Color Fusion General Instructions

Color Fusion Cleaning Instructions

Due to fog residue, smoke, and dust cleaning the fixture should be

carried out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing every 20 days.

2. Use normal glass cleaner with a soft cloth to wipe down the inside

reflector and lens every 30-60 days.

3. Always be sure to dry all parts completely before plugging the

unit back in.

4. Frequent cleaning the unit will extend lamp life and ensure the fix-

tures reliability.

Cleaning frequency depends on the environment in which the fixture

operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec-

ommend cleaning on a monthly basis. Periodic cleaning will ensure

longevity, and crisp light output.

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ®

Color Fusion. The American DJ® Color Fusion is available in a 120v

and 220v version. Because line voltage may vary from venue to venue,

you should be sure your unit voltages matches the wall outlet voltage

before attempting to operate you ﬁxture.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

different manufactures to be linked together and operate from a single

controller, as long as all ﬁxtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/

Slave Operation): The Color Fusion can be controlled via DMX-512

protocol. The Color Fusion is a seven channel DMX unit. The DMX

address is set on the back panel of the Color Fusion. Your unit and your

DMX controller require a standard 3-pin XLR con-

nector for data input and data output (Figure 1).

If you are making your own cables, be sure to

use standard two conductor shielded cable (This

cable may be purchased at almost all pro sound

and lighting stores). Your cables should be made

with a male and female XLR connector on either

end of the cable. Also remember that DMX cable

must be daisy chained and can not be split.

©American DJ® - www.americandj.com - Color Fusion Instruction Manual Page 5

Color Fusion Set Up

©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 6

Figure 1

Notice: Be sure to follow ﬁgures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

Color Fusion Set Up

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conﬁguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 4

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin XLR

connectors for DATA transmission in place of 3-pin. 5-pin XLR ﬁxtures

may be implemented in a 3-pin XLR DMX line. When inserting stan-

dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be

used, these adaptors are readily available at most electric stores. The

chart below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Color Fusion Operating Instructions cont.

©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 8©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 7

Operating Modes:

You can use the Color Fusion in four ways:

• Sound-Active mode - The unit will react to sound, chasing through

the built in programs.

• Master/Slave mode - You can daisy chain units together to get a

synchronized light show that will react to sound, chasing through

built in programs.

• DMX control mode - This function will allow you to control each

individual fixtures traits with a standard DMX 512 controller such as

the Elation® Show Designer.

Sound Active Mode:

In this mode the Color Fusion will react to sound, and chase through

the different colors.

1. Switch dipswitch #10 to the “ON” position.

2. Plug the fixture in and it will chase through its colors via sound.

Master-Slave Operation:

This function will allows you to link units together to run in a Master-

Slave mode. In Master-Slave operation one unit will act as the con-

trolling unit and the others will react to the controlling units built-in

programs. Any unit can act as a Master or as a Slave however, only

one unit can be programmed to act as the “Master.”

Master-Slave Connections and Settings:

1. Daisy chain your units via the XLR connector on the rear of

the unit. Use standard XLR microphone cables to link your

units together. Remember that the Male XLR connector is the

input and the Female XLR connector is the output. The first

unit in the chain (master) will use the female XLR connector

only. The last unit in the chain will use the male XLR

connector only.

2. Set dipswitches #1 and #10 to the “ON” position, on the “Master”

unit.

3. For the “Slave” unit(s), follow the dipswitch settings on page 8.

4. Connect the “Slave” unit or units and they will automatically start

to follow the “Master.”

Color Fusion Operating Instructions

DMX Mode:

Operating through a DMX controller give the user the freedom to cre-

ate their own programs tailored to their own individual needs. This

function also allows you to use your fixtures as spot lights.

1. This function will allow you to control each individual fixture’s

traits with a standard DMX 512 controller such as the

Elation® Show Designer™ or the Elation® DMX Operator.

2. The Color Fusion uses seven DMX channels to operate;

Channel 1 is Red, channel 2 is Green, channel 3 is Blue, channel

4 is Color Mixing, channel 5 is dimming, channel 6 is Strobe and

Speed control, and channel 7 is built-in modes .

3. To run your fixture in DMX mode, plug in the fixture via the XLR

connections to any standard DMX controller. Switch dipswitch

#1 to the “ON” position. - Follow the set-up specifications that

come with your DMX controller.

Master/Slave Chart

Head 4

142 3 8

6 75 9 10

Head 3

21 3 4 6 87 9 105

Head 2

21 3 4 6 87 9 105

Master-Head 1

248

65 7910

©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 10©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 9

Color Fusion DMX Values and Functions

Channel Value Function

1 0 - 255 RED

2 0 - 255 GREEN

3 0 - 255 BLUE

4 0 - 255 COLOR MIXING

5 0 - 255 DIMMING CONTROL

0% 100%

6 0 - 255 STROBE AND SPEED CONTROL

SLOW FAST

7 0 - 255 MODE

0 - 127 BLACKOUT

128 - 159 RAINBOW STROBE

160 - 191 SLOW RAINBOW FLUTTER

192 - 223 FAST RAINBOW FLUTTER

224 - 255 SOUND ACTIVE

Channels 5 and 6 can be used with Channels 1, 2, 3, and 4.

Channel 6 is also used with Channel 7.

If the value of Channel 7 is above 128, Channels 1, 2, 3, 4, and

5 will not work, Channel 6 will control the speed of the Channel

7 Modes.

Color Fusion Halogen Lamp Warning

This fixture is fitted with halogen lamps which are

highly susceptible to damage if improperly handled.

Never touch the inside lamp with your bare fingers

as the oil from your hands will shorten lamp life.

Also, never move the fixture until the lamp has had

ample time to cool. Remember, lamps are not cov-

ered under warranty conditions.

Color Fusion Lamp Replacement

Lamp Replacement: Caution! Never open the unit when in use.

Always disconnect the main power before attempting to replace the

lamp. Remember always replace with the same type lamp and fuse.

1. Be sure to follow the proper procedures when handling

halogen bulbs.

2. Unscrew the two phillips screws located directly under the top of

the barn door hinge.

3. Pull the glass cover down, you will notice that it is connected with

hinges.

4. Remove the bulb(s) by either pushing the bulb up and pulling it out

or down and out. Replace the bulb with the same type of bulb.

5. Reassemble.

Color Fusion Fuse Replacement

Fuse Replacement: First uplug the power. Locate the fuse holder on

the back of the unit underneath the power cord. Insert a flat-head screw

driver into the power socket and unsecrew the fuse holder. Remove the

bad fuse and replace with a new one.

Color Fusion Trouble Shooting

Listed below are a few common problems the user may encounter,

with solutions.

No light from the unit:

1. Check the fuse in the back panel.

2. Check if the lamps are lit. If power is present but the lamps are

not lit, the lamp may need to be replaced.

Unit not responding to DMX:

1. Check that the DMX cables are connected properly and are

wired correctly (pin 3 is “hot”; on some other DMX devices

pin 2 may be ‘hot’). Also, check that all cables are connected

to the right connectors; it does matter which way the inputs

and outputs are connected.

Unit does not respond to sound:

1. Quiet or high pitched sounds will not activate the unit.

If problems are not resolved; Contact American DJ® for service.

1-800-322-6337

©American DJ Supply® - www.americandj.com - Color Fusion Instruction Manual Page 11

1-YEAR LIMITED WARRANTY

A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be

free of manufacturing defects in material and workmanship for a period of 1 Year (365 days)

from the date of purchase. This warranty shall be valid only if the product is purchased

within the United States of America, including possessions and territories. It is the owner’s

responsibility to establish the date and place of purchase by acceptable evidence, at the

time service is sought.

B. For warranty service, send the product only to the American DJ® factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement)

are within the terms of this warranty, American DJ® will pay return shipping charges only

to a designated point within the United States. If the entire instrument is sent, it must be

shipped in its original package. No accessories should be shipped with the product. If any

accessories are shipped with the product, American DJ® shall have no liability whatsoever

for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is

modiﬁed in any manner which American DJ® concludes, after inspection, affects the reli-

ability of the product; if the product has been repaired or serviced by anyone other than

the American DJ® factory unless prior written authorization was issued to purchaser by

American DJ®; if the product is damaged because not properly maintained as set forth in

the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning

or periodic check-up. During the period speciﬁed above, American DJ® will replace defec-

tive parts at its expense, and will absorb all expenses for warranty service and repair labor

by reason of defects in material or workmanship. The sole responsibility of American DJ®

under this warranty shall be limited to the repair of the product, or replacement thereof,

including parts, at the sole discretion of American DJ®. All products covered by this war-

ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E. American DJ® reserves the right to make changes in design and/or improvements upon

its products without any obligation to include these changes in any products theretofore

manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any acces-

sory supplied with products described above. Except to the extent prohibited by applicable

law, all implied warranties made by American DJ® in connection with this product, includ-

ing warranties of merchantability or ﬁtness, are limited in duration to the warranty period

set forth above. And no warranties, whether expressed or implied, including warranties

of merchantability or ﬁtness, shall apply to this product after said period has expired. The

consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly

provided above; and under no circumstances shall American DJ® be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

G. This warranty is the only written warranty applicable to American DJ® Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions

heretofore published.

H. Lamps are not covered under this or any other warranty, either written or implied.

Color Fusion Warranty Color Fusion Specifications

Model: Color Fusion

SPECIFICATIONS:

Working Position: Any safe working position

Voltage: 115V/60Hz or 230V/50Hz

Lamp: 3 x LL EHM 120V/300W or

230V/300W

Weight: 13.21lbs./ 6Kgs.

Dimensions: 14.2” (L) x 8.86” (W) x 5.9” (H)

Fuse: 15 Amp

Colors: 3 colors

Power Draw:

Lamps Off: 1.3 amps

One Lamp (100%): 2.7 amps

Two Lamps (100%): 4.8 amps

Three Lamps (100%): 7.1 amps

Cooling: Fan Cooled

Warranty: 1 Year (365 days)

Please Note: Speciﬁcations and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

American DJ World Headquarters:

4295 Charter Street Los Angeles, CA 90058 USA

Tel: 323-582-2650 / Fax: 323-582-2610

Web: www.americandj.com / E-mail: [email protected]

Inhaltsverzeichnis

Andere American DJ DJ-Equipment Handbücher

American DJ

American DJ LL-200 Bedienungsanleitung

American DJ

American DJ Image 250 Bedienungsanleitung

American DJ

American DJ Starball LED DMX Bedienungsanleitung

American DJ

American DJ Mobile Beam Bedienungsanleitung

American DJ

American DJ BPP-20 Bedienungsanleitung

American DJ

American DJ Electra LED DMX Bedienungsanleitung

American DJ

American DJ Mighty Scan Bedienungsanleitung

American DJ

American DJ MINI-Gressor II Bedienungsanleitung

American DJ

American DJ Warp! Bedienungsanleitung

American DJ

American DJ H2O LED Bedienungsanleitung

American DJ

American DJ DJ Scan 250 Bedienungsanleitung

American DJ

American DJ Majestic LED Bedienungsanleitung

American DJ

American DJ Trance Wheel 250 Bedienungsanleitung

American DJ

American DJ Color Shot Bedienungsanleitung

American DJ

American DJ Mini Flame LED Bedienungsanleitung

American DJ

American DJ Fire Bowl Bedienungsanleitung

American DJ

American DJ Mega Pixel LED Bedienungsanleitung

American DJ

American DJ LED Touch Bedienungsanleitung

American DJ

American DJ DJ Spot LED Betriebsanleitung

American DJ

American DJ MULTI-LED CURTAIN Bedienungsanleitung

American DJ

American DJ DJ Scan 250 Bedienungsanleitung

American DJ

American DJ 4-Play Bedienungsanleitung

American DJ

American DJ Flash Duo Bedienungsanleitung

American DJ

American DJ Mighty Scan Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung