AMP Lighting 3601 Series Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® Estate Size Path & Area Lights

3601 Series

AMP®Estate Size Path & Area Lights

3601 Series

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

10.25”

6”

3”

Estate Size Hat featured

on Estate Size Low

Voltage Stem

36”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®Estate Size Path & Area Lights

3601 Series

Remove Stem Top

Install Lamp

Loosen the stem top and remove

it from the top end of the stem.

Stem

Stem Top

Insert the lamp with the correct

wattage and type marked on the

xture label and push rmly into

place.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

Socket

Lamp

Install Stem Top

Thread the stem top onto the

stem and hand tighten until

snug.

Stem Top

Stem

[email protected] • 813.978.3900

–5–

Install Stake

Remove Cap from Stake

Dig a hole in the ground for the stake. Slide the stabilizer grid onto the

stake and secure with the screws. Place the stake and backll against

the mounting stake.

Stake

Stabilizer

Grid

Ground Level

Stake

Remove the cap from the stake

by loosening the set screws.

Set Screw

Cap

Stake

Install Cap to Base

Screw the coupler on the bottom

center of the base and then

thread the cap onto the coupler.

Base

Coupler

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®Estate Size Path & Area Lights

3601 Series

Fixture Installation

Pass the supply wires through the

stake. Attach the cap with the

xture onto the stake and secure

with set screws. Hand tighten until

snug with a screwdriver.

Set Screw

Cap

Stake Supply Wire

Wire Connection

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main

supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

–6––6–

[email protected] • 813.978.3900

–7–

Install/Replace Lamp

Install Hat

Place the hat of your choice onto the stem top and secure it with the nial,

or thread the hat of your choice onto the stem top directly. Hand tighten

until snug.

Stem Top

Finial

Hat of your choice

Remove the nial, hat and stem top to expose the lamp and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the stem top, hat and nial.

IMPORTANT: Lamps must be protected from moisture and dust at all

times. Always reinstall the stem top and hat when removed.

IS-ASM-3601-4-BBZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting EquaPro Flood Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EscherPro MR11 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7004-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VariantPro AAL-1028-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3031-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAR-I-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-301X-XX-4-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro AAR-3518-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1012 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro Mini Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EscherPro AAL-1023 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting G2 ControlPro Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VariantPro Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Box Brass ASDL-2014-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3016-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung