AMP Lighting EscherPro MR11 Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® EscherPro MR11 Lanai Light Brass Black

AAL-1046-B-BK

AMP®EscherPro MR11 Lanai Brass Black

AAL-1046-B-BK

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

Important Safety Instructions

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the war-

ranty.

These instructions do not intend to cover all variations in installation, opera-

tion maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (transform-

er) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with UL Listed wire connectors that

are suitable for the application.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

[email protected] • 813.978.3900

Parts Required (Sold separately)

–3–

Package Contents

A. (1) Fixture

B. (2) Anchors

C. (2) Screws

D. (1) Allen Wrench

Product Dimensions

A. (1) MR11 Lamp

3.89”

1.82”

3.08”

1.04”

2.95”

1.82”

1.58”

2.57”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®EscherPro MR11 Lanai Brass Black

AAL-1046-B-BK

Remove Glare Guard

Loosen the thumb screw to

remove glare guard from the

xture body.

Thumb Screw

Fixture Body

Glare Guard

Remove Lens

Fixture Body

Rotate the lens counter-clockwise

and remove it from the xture

body.

Lens

Install MR11 Lamp

Insert MR11 Lamp with correct

wattage and type marked on

xture label.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

MR11 Lamp

Socket

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®EscherPro MR11 Lanai Brass Black

AAL-1046-B-BK

Install Lens

Fixture Body

Lens

Place the lens back onto the

xture body and rotate it

clockwise to lock it in place.

Install Glare Guard

Thumb Screw

Fixture Body

Glare Guard

Place the glare guard back

onto the xture body and

secure with previously

removed screw.

Adjust the glare guard direction

Rotate

Knuckle Screw

Allen

Wrench Glare Guard

Loosen the knuckle screw

at the joint and rotate the

glare guard until there is

enough space for next step.

Tighten the screw once

the glare guard direction is

achieved.

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®EscherPro MR11 Lanai Brass Black

AAL-1046-B-BK

Install Fixture Body

Determine the desired location

for the xture. Mark points on

the desired location from the

holes on the backplate of the

xture body.

Remove the xture body, drill

holes from the marks and insert

anchors completely.

Pull the supply wire out of the

backplate from the slot on the

bottom. Place the backplate of

xture body over the anchors and

secure with screws. Hand tighten

with a screwdriver.

Screw

Anchor

Mark

WALL

Fixture Body

Fixture Wire

Slot

Wire Connection

Strip two leads from the xture

wires. Using two UL listed wire

connectors (not provided), con-

nect leads from xture wires to

main supply cable leads.

Main Supply Cable

Fixture Wires

Wire Connectors

–6––6–

[email protected] • 813.978.3900

–7–

Adjust Glare Guard Direction

Rotate

Screw

Allen

Wrench

Glare Guard

Loosen the knuckle screw at

the joint and rotate the glare

guard to the desired direction.

Tighten the knuckle screw

once the glare guard direction

is achieved.

Install/Replace MR11 Lamp

Please reverse Step 3 - Step 5 to expose the MR11 lamp and replace it

with correct wattage and type marked on xture label. And then reinstall

the lens and glare guard.

IS-AAL-1046-B-BK-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting HydraPro AUL-8001-25-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Slimline VAC-SLMTIMER1 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting G2 ControlPro Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE HydraPro AWL-700IR-25-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-301X-XX-4-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting NovelPro APL-3021-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4015-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting KinglyPro APL-3020-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3032-26-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-712IR-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro Step Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASSI-9008-50-BK Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting 3602 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1015-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4011-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung