Apera Instruments LabSen 763 Bedienungsanleitung
LabSen® 763 Blade Spear pH/Temp. Electrode
User Manual
LabSen® pH electrodes are made with proprietary sensor technologies and key components from
Switzerland. LabSen® 763 Blade Spear pH Electrode adopts a spear glass membrane with titanium blade
sheath, which can easily pierce into solid medium while protecting the sensor. This probe is designed for
pH measurement of raw/frozen meat and fish.
Features(
• LabSen® S-type spear sensor tip featured with high firmness and fast response, designed for
direct measurement of solid samples
• Built-in temperature sensor for automatic temperature compensation (ATC)
• Food-grade titanium blade sheath, easily piercing into hard samples while providing strong
protection to the sensor
• Open&Ceramic double-junction with Polymer electrolyte. No more junction clogs.
• Long life reference system improves the stability of the reference system and extends the
electrode’s service life.
• Blue gel inner solution - does not flow and will not generate air bubbles
Technical(Specifications(
Measuring Range
0 – 14 pH
Temperature Range
0 – 80 °C
Body Material
Food-Grade Titanium
Temperature Sensor
NTC 30KΩ
Reference
Long Life
Junction
Ceramic + Single Pore
Reference Solution
Polymer
Soaking Solution
3M KCL
Electrode Dimension
Electrode (Φ12×115) mm
Measuring Tip (Φ6×50) mm
Connector
BNC/RCA
Cable
Φ3×1m
How(to(use(
1. Insert the blue BNC connector of the electrode to the BNC socket of your pH
meter while twisting clockwise until it’s locked.
2. Insert the black RCA connector of the electrode to the RCA socket directly.
3. Before measuring, twist off the storage bottle cap (see graph on the right), pull
out the electrode and rinse it off with distilled or deionized water.
4. Perform at least a two-point calibration before measuring after connecting the
new electrode to your pH meter.
5. After using, put the electrode back into the storage bottle and twist on the
bottle cap.
Maintenance(
1. When not in use, the electrode should be soaked in the storage bottle containing 3M KCL soaking
solution to keep the glass membrane and junction in a healthy condition. Clean the bottle and replace
the soaking solution if it gets contaminated. The electrode should never be stored in pure water such
as deionized or distilled water.
2. The electrode is only as accurate as it is clean. Always thoroughly rinse off the probe before and after
each measurement with pure water in a container or with a wash bottle.
3. The transparent polymer gel electrolyte will inflate and ooze out a bit when it’s soaked in KCL solution.
This will not affect the measurement of the electrode, and it will happen more frequently with newer
electrodes. This is a “self-clean” situation especially when the junction gets contaminated. Just wipe
off the inflated gel with clean tissue and continue to use the electrode as normal.
4. When piercing meat (especially frozen meat), avoid bending the spear tip. Wash the electrode and
the titanium sheath with soap water after measurement, the titanium blade can be screwed off and
cleaned separartely if necessary.
5. The connector of the electrode should be kept clean and dry. If contaminated, please clean it with
medical cotton and absolute alcohol and blow dry to prevent the short circuit of the electrode and
slow reaction of electrode.
6. For tough contaminants, soak the electrode in Apera cleaning solution (AI1166) for 30 minutes. Then
use a soft brush to remove the contaminants. Afterwards, soak the electrode in 3M KCL soaking
solution for at least 1 hour. Rinse it off, then re-calibrate it before using again.
7. The connector of the electrode should be kept clean and dry. If contaminated, please clean it with
medical cotton and isopropyl alcohol and blow-dry it to prevent short circuit of the electrode or slow
response of the electrode.
8. The electrode should avoid testing strong acid and strong alkali solutions, as well as dehydrating
media such as absolute ethanol and concentrated sulfuric acid. If testing such solutions, the
immersion time should be minimized and the electrode should be carefully cleaned after use.
9. Every pH electrode will eventually age and fail. The typical service life of Apera pH electrodes is 12-
24 months depending on the frequency of usage and how well you keep it clean and properly stored.
We recommend replacing your electrode every 12-18 months to ensure the best accuracy.
Warranty(
We warrant this electrode to be free from defects in material and workmanship and agree to repair or
replace free of charge, at option of APERA INSTRUMENTS, LLC, any malfunctioned or damaged product
attributable to responsibility of APERA INSTRUMENTS, LLC for a period of SIX MONTHS from the
delivery.
This limited warranty does NOT cover any damages due to:
Accidental damage, transportation, storage, improper use, failure to follow the product instructions or to
perform any preventive maintenance, unauthorized repair or modifications, normal wear and tear, or other
external causes or actions beyond our reasonable control.
To get the fastest warranty fulfillment, go to support.aperainst.com and click “New Support Ticket” on
the upper right corner. Type your email in the requester field, “Warranty” in the Subject field, and then
input the following information in the description field:
• Your full name
• Product model that needs warranty fulfillment
• Serial number of the product (can be found on the back sticker of the tester body)
• What problem or issue you had experienced with the product
• Attach a photo of your proof of purchase
• Attach a photo of the problematic product
Then click Submit. One of our customer care specialists will help you fulfill the warranty within one
business day.
APERA INSTRUMENTS, LLC
Address: 6656 Busch Blvd, Columbus, OH 43229 Phone: 1-614-285-3080
Inhaltsverzeichnis
Andere Apera Instruments Messgerät Handbücher
Apera Instruments
Apera Instruments PH60-WW Bedienungsanleitung
Apera Instruments
Apera Instruments DO8500 Bedienungsanleitung
Apera Instruments
Apera Instruments YD300 Bedienungsanleitung
Apera Instruments
Apera Instruments SX823-B Bedienungsanleitung
Apera Instruments
Apera Instruments Gro Star AI102G Bedienungsanleitung
Apera Instruments
Apera Instruments SX716 Bedienungsanleitung
Apera Instruments
Apera Instruments PH60 Bedienungsanleitung
Apera Instruments
Apera Instruments Premium Series Bedienungsanleitung
Apera Instruments
Apera Instruments PH60Z-MS Bedienungsanleitung
Apera Instruments
Apera Instruments 2401T-F Bedienungsanleitung
Apera Instruments
Apera Instruments TN420 Bedienungsanleitung
Apera Instruments
Apera Instruments PH400 Bedienungsanleitung
Apera Instruments
Apera Instruments LabSen 851-1 Bedienungsanleitung
Apera Instruments
Apera Instruments PH910 Bedienungsanleitung
Apera Instruments
Apera Instruments WS100 Bedienungsanleitung
Apera Instruments
Apera Instruments PH850 Bedienungsanleitung
Apera Instruments
Apera Instruments 9500 Premium Series Bedienungsanleitung
Apera Instruments
Apera Instruments 9500 Premium Series Bedienungsanleitung
Apera Instruments
Apera Instruments LabSen 803 Bedienungsanleitung
Apera Instruments
Apera Instruments TN400 Bedienungsanleitung
