Argos Capella Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 81.6cm

Depth - 39cm

Height - 129.3cm

Capella - Dressing Table

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 6 - 16/10/14

Important - Please read these instructions fully before starting assembly

262/1982

264/0877

267/6511

ALR2995

Issue 2 - 20/07/11 - The assembly method has been altered so that the Mirror Back is now fitted before the unit is stood up.

Drawer assembly changed to Knock-in Pegs.

Drawer Sides and Drawer Back changed to take Knock-in Pegs.

227/5091

Issue 3 - 16/05/12 - New Argos code added.

Issue 4 - 04/12/13 - The screws to fit the seat pad were too long and have been replaced

Issue 5 - 28/03/14 - Drawer box size increased.

Drawer wedges added.

Plastinails added.

Old cat codes removed and new ones added.

Issue 6 - 16/10/14 - Overbalance Strap Kit added.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 23kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

100%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

876

Left Side (D1033A)

(744 x 390mm)

Top (D1035A)

(786 x 369mm)

Modesty (D1037A)

(786 x 329mm)

Mirror Back (D1036A)

(900 x 495mm)

Right Side (D1034A)

(744 x 390mm)

Drawer Front (D1038A)

(782 x 138mm)

Drawer Base (T441)

(767 x 317mm)

(Mirror SG12

484 x 548mm

4mm Safety Back SAR)

Drawer Back (W441BBK)

(756 x 95mm)

Left Drawer Side (W516BLH)

(320 x 95mm)

Right Drawer Side (W516BRH)

(320 x 95mm)

Please check you have all the fittings listed below

Tools required

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 8

Metal dowel (F901) x 10

D E

Large locking

nut (F900) x 8

G H I

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Small locking

nut (F3) x 2

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Drawer runner (F1004) x 2 Handle (F930) x 1

see malibu fitment mk2 for large number of panels and fittings

25mm Screw (F50) x 2 9mm Screw (F74) x 4 9mm Screw (F73) x 4

45mm Screw (F65) x 2

25mm Connecting sleeve

(F432) x 2

Knock-in Peg (F171) x 4

Plastic Nail (F91) x 4

Wedgefix (F639) x 4

OStrap Screw Washer x 2

Overbalance protector kit (F269) x 1

Electric drill

(do not use for

fitting screws)

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Prepare the drawer

front

Screw 2 metal dowels

into the holes shown on

the back of the drawer

front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and right drawer

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 2

Step 3

Assemble the drawer

sides and back

Fit the left drawer side

and right drawer side

to the drawer back

by tapping in 4 knock-in

pegs .

Small groove

Assembly Instructions

Step 4

Attach the handle

Attach a handle to the

drawer front using 2

screws .

Step 6

Step 5

Fit the drawer base

Slide the drawer

base along the

grooves of the drawer

sides and into the

groove of the drawer

back .

6 7

Attach the drawer

front

Turn the drawer

assembly over and push

onto the back of the

drawer front .

Note: Turn locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Note: The locking nuts can be on

either surface of the drawer sides.

Fit the wedgefixes

Turn the drawer

assemblie over and slide

4 wedgefixes into the

front and back grooves,

as shown, and tighten up

the screws.

Step 7

Profiled

front edge

Assembly Instructions

Step 8

Profiled

front edge

Back edge

Prepare the left side

a: Place 1 runner on

the left side . Slide

back the top of the

runner and use the 1st

hole from the front to fit

the 1st screw .

b: Slide the runner back

the other way and use

the 3rd hole from the

back to fit the 2nd screw

c: Screw 4 metal

dowels into the left

side .

Profiled

front edge

Profiled

front edge

Assembly Instructions

Step 9

Prepare the right side

a: Place 1 runner on

the right side . Slide

back the top of the

runner and use the 1st

hole from the front to fit

the 1st screw .

b: Slide the runner back

the other way and use

the 3rd hole from the

back to fit the 2nd screw

. .

c: Screw 4 metal

dowels into the right

side .

Profiled

front edge

Back edge

Profiled

front edge

Profiled

front edge

Profiled

front edge

Assembly Instructions

Step 10

Prepare the top

Tap 4 wooden dowels

into the top as

shown.

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 4 large locking

nuts into the top

as shown.

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

10mm

Join the right side and

top

Push the top onto

the right side as

shown.

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the top .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Step 11

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 12

Prepare the modesty

Tap 4 wooden dowels

into the modesty .

Insert 4 large locking

nuts into the modesty

Step 13

Fit the modesty

2 people are needed

here

Attach the modesty

to the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the modesty .

Support the modesty

until the left side has

been fitted in the next

step.

Note: Support this

end of modesty

until the left side

has been fitted in

the next step.

Finished

edge

Andere Handbücher für Capella

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Darcy TV Stand 392/5591 Bedienungsanleitung

Argos

Argos Arvika 335/9789 Bedienungsanleitung

Argos

Argos 709/2592 Bedienungsanleitung

Argos

Argos 8146643 Bedienungsanleitung

Argos

Argos 832/9408 Bedienungsanleitung

Argos

Argos Scandinavia Bedienungsanleitung

Argos

Argos Tolga 03R 462/6071 Bedienungsanleitung

Argos

Argos Asha Bedienungsanleitung

Argos

Argos 244/9315 Bedienungsanleitung

Argos

Argos SAN DIEGO 408/8365 Bedienungsanleitung

Argos

Argos Phoenix 719/3147 Bedienungsanleitung

Argos

Argos 245/7424 Bedienungsanleitung

Argos

Argos AVR 4 Seater Patio Set Bedienungsanleitung

Argos

Argos Normandy 428/2611 Bedienungsanleitung

Argos

Argos Double Metal Futon 656/0898 Bedienungsanleitung

Argos

Argos Seville Bedienungsanleitung

Argos

Argos Jenson 937/8032 Bedienungsanleitung

Argos

Argos 389/6400 Bedienungsanleitung

Argos

Argos Kids Sywell 248/6282 Bedienungsanleitung

Argos

Argos Verona 609/5026 Bedienungsanleitung

Argos

Argos 719/3594 Bedienungsanleitung

Argos

Argos SAN DIEGO 412/7893 Bedienungsanleitung

Argos

Argos Fabric Large Ottoman 227/6430 Bedienungsanleitung

Argos

Argos 617/2516 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung