Argos Lima Coffee Table Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 117cm

Depth - 49cm

Height - 37cm

Lima - Coffee Table

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 1 - 01/07/14

Important - Please read these instructions fully before starting assembly

ALR3074

275/5205

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 22kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

2 3

9 10

Top (D01121A)

(1166 x 489mm)

Base (D1124A)

(1090 x 466mm)

Small Back (D1127A)

(377 x 224mm)

Plinth (D1094A)

(1090 x 96mm) x 2

Right Side (D1123A)

(335 x 485mm)

Large Back (D1126A)

(224 x 650mm)

Left Drawer Side (W445LH)

(320 x 150mm)

Right Drawer Side (W445RH)

(320 x 150mm)

Upright (D1909A)

(224 x 466mm)

Left Side (D1908A)

(335 x 485mm)

Drawer Front (D1910A)

(390 x 237mm)

Drawer Base (T558)

(338 x 317mm)

Drawer Back (W558)

(327 x 150mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 4

Metal dowel (F901) x 14

Large locking

nut (F900) x 12

Small locking

nut (F3) x 2

Small metal dowel (F893) x 4

19mm Screw (F461) x 2

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

J K

Hollow core

locking nut

(F892) x 4

Wedgefix (F639) x 2

40mm Screw (F910) x 4

Mini block (F25) x 4

Knock-in Peg (F171) x 4

13mm Screw (F52) x 6

MR Runner (F160) x 1

L Runner (F161) x 1

L Runner (F159) x 1

R Runner (F162) x 1

13mm Screw (F63) x 6

Tools required

Rule Scissors Hammer Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Handle (F306) x 1

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Prepare the drawer

front

Screw 2 metal dowels

into the holes shown on

the back of the drawer

front .

Note: Tighten metal

dowels up fully against

the panel.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and right drawer

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Assemble the drawer

sides and back

Fit the left drawer side

and right drawer side

to the drawer back

using 4 knock-in pegs

Step 2

Step 3

Small grooves

on the inside

Fit the drawer back

down onto the drawer

base .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on

either surface of the drawer sides.

Make sure that the small groove

is on the inside, as shown.

Step 3

Attach the drawer

sides to the drawer

front

Push the left drawer side

. and right drawer side

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Small groove

Note: The locking nuts can be on

either surface of the drawer sides.

Make sure that the small groove

is on the inside, as shown.

x 2

Small groove

Assembly Instructions

Step 4

Attach the handle

Attach the handle to

the drawer front

using 2 screws .

Step 6

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

9 10

1010

Assembly Instructions

Step 7

Step 8

Fit runners to the

drawers

Fit the runner to the

bottom edge of the left

drawer side , as

shown, making sure that

it is pushed up against

the back of the drawer

front . Use a bradawl

to mark the fixing

positions, then secure

with 2 screws .

Fit the runner to the

bottom edge of the right

drawer side using the

same method.

M c

M d

M c

M d

Runners must be

pushed up against

the drawer front

Fit the wedgefixes

Turn the drawer

assembly over.

Slide a wedgefix into

the centre of the small

groove located on the

back of the drawer

front and the drawer

back .

Once in place, tighten up

the screws in the

wedgefixes .

Assembly Instructions

Step 9

Prepare the left side

a: Fit runner to the

left side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

b: Fit a screw into

the 2nd hole in at the top

of the runner .

c: Screw 6 large metal

dowels into the holes

shown on the left side

. .

Push 2 hollow core

locking nuts into the

left side , making sure

that they are flush

against the panel’s

surface.

Using a hammer, tap in

the pin on the hollow

core locking nut .

Note: The pin should be

tapped in flush with the

top surface of the hollow

core locking nut .

M a

K K

1st

screw

2nd

screw

3rd

screw

M a

Assembly Instructions

Step 10

Prepare the top

Screw 4 small metal

dowels into the holes

in the top .

Note: Tighten metal

dowels up fully against

the panels.

Prepare the small

back

Insert 4 large locking

nuts into the small

back , as shown.

Note: Arrow on locking

nut must point towards

hole in edge of panel.

Step 11

Join the left side and

small back

Push the small back

onto the left side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the small back .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Step 12

Note: The top edge of

both panels must be

flush with each other

Assembly Instructions

Step 13

Prepare the right side

Screw 4 large metal

dowels into the holes

shown on the right side

. .

Push 2 hollow core

locking nuts into the

right side , making

sure that they are flush

against the panel’s

surface.

Using a hammer, tap in

the pin on the hollow

core locking nut .

Note: The pin should be

tapped in flush with the

top surface of the hollow

core locking nut .

Step 10 G

C B

Join the left side and

top

Push the left side

onto the top .

The 2 small metal dowels

. fitted to the top

must slide into the top of

the 2 hollow core locking

nuts fitted to the left

side .

Insert a screwdriver into

the 2 hollow core locking

nuts and turn the nuts

inside as far as they will

go.

Prepare the upright

a: Fit runner to the

upright .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

b: Fit a screw into

the 2nd hole in at the top

of the runner .

Screw 2 large metal

dowels into the

upright .

Gently tap 2 mini blocks

. into the holes on the

upright , orientated as

shown.

Join the top and

upright

Position the upright

so that the screws from

the mini blocks are

over the holes in the top

panel .

Tighten up the screws in

the 2 mini blocks into

the holes in the top .

Step 14

Front edge

M b

Front edge

K1st

screw

2nd

screw

K3rd

screw

M b

Front edge

M b

Front

edge

Front

edge

M b

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Darcy TV Stand 392/5591 Bedienungsanleitung

Argos

Argos Silbury 4083690 Bedienungsanleitung

Argos

Argos 7592573 Bedienungsanleitung

Argos

Argos 487/8317 Bedienungsanleitung

Argos

Argos White Media Storage Unit With Glass Doors... Bedienungsanleitung

Argos

Argos Ottawa 194803 Bedienungsanleitung

Argos

Argos COLOURMATCH BARSTOOL 600/6060 Bedienungsanleitung

Argos

Argos Denver 352/9045 Bedienungsanleitung

Argos

Argos Winchester 395/5798 Bedienungsanleitung

Argos

Argos 473/8639 Bedienungsanleitung

Argos

Argos 600/5580 Bedienungsanleitung

Argos

Argos 1866968 Bedienungsanleitung

Argos

Argos 737/6672 Handbuch

Argos

Argos Habitat PATSY CLIC CLAC 3337574 Bedienungsanleitung

Argos

Argos Designer 2 Tone Bedienungsanleitung

Argos

Argos Clive Metal Futon 758/7502 Bedienungsanleitung

Argos

Argos Malibu 238/7154 Bedienungsanleitung

Argos

Argos TOBY 8559230 Bedienungsanleitung

Argos

Argos Sit N' Sleep Bed Bedienungsanleitung

Argos

Argos 875/5429 Bedienungsanleitung

Argos

Argos Malibu 184/8072 Bedienungsanleitung

Argos

Argos 149113 Bedienungsanleitung

Argos

Argos Alicia 188/8379 Bedienungsanleitung

Argos

Argos Solid Wood Linen Bin 8318471 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung