Assa Abloy Corbin Russwin FE6600 Series Bedienungsanleitung

FM467 03/20

Installation Instructions

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

WARNING

This product can expose you to lead

which is known to the state of California

to cause cancer and birth defects or other

reproductive harm. For more information

go to www.P65warnings.ca.gov.

FE6600 and

BL6600 Series

Freewheeling Lever with Escutcheon Trim

Multi-Point Lock

FE6600 and BL6600 Series

Installation Instructions

Multi-Point Lock

FM467 03/20

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

1 Tools Required

Phillips Screw Driver 3/8" Wrench 5/32" Allen Wrench

TOC Table of Contents

1 Tools Required ..................................................................2

2 Package Contents ...............................................................3

3 Installation ......................................................................4

a Install Lockbody .................................................................4

b Assemble Outside Escutcheon ...................................................4

c Assemble Adapter and Plate .....................................................4

d Secure Cylinder..................................................................5

e Inside Escutcheon ...............................................................5

f Inside Lever .....................................................................5

4 Changing Hand of Trim ..........................................................6

FE6600 and BL6600 Series

Installation Instructions

Multi-Point Lock

FM467 03/20

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

2 Package Contents

Figure1

B10

Figure1 Description Qty.

1 Inside Lever 1

2 Spring 1

3 Set Screw 1

4 Thru-bolt Screws (1/4"-20 x 1-3/4) 2

5 Inside Escutcheon Plate 1

6 Screws & Lock Washers (#8-32 x 5/8") 2

7 Adapter & Plate Assembly 1

7A Adapter 1

7B Washers 2

7C Mounting Plate 1

7D Retaining Nut 1

8 Lever Spindle 1

9 Outside Escutcheon Assembly 1

10 Cylinder 1

11 Screws (#8-32 x 1/4") 2

12 Front Plate 1

13 Lockbody Screws (#12 x 1-1/4") 2

14 Lockbody 1

FE6600 and BL6600 Series

Installation Instructions

Multi-Point Lock

FM467 03/20

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

3 Installation

a Install Lockbody

Insert lock body into mortise cutout. Hold loosely in place with

(2) lock body screws.

Note:

Do not tighten screws fully at this time. (Figure2)

b Assemble Outside Escutcheon

1. With outside lever horizontal, carefully insert mounting

posts through the door and lock body.

• Make sure spindle is properly engaged in the lock.

• Outside escutcheon assembly should be flush with

door surface.

If cylinder is not included in this function, proceed to Step 3c.

2. Screw cylinder into lock body until flush with

escutcheon face. (Figure3)

c Assemble Adapter and Plate

1. Tighten retaining nut on inside of mounting plate and adapter as far

as it will go by hand, then back off retaining nut one notch until star

pattern lines up with square corners. (Figure4)

2. Insert lever spindle into adapter and plate assembly so that it is held in

place. (Figure5)

3. Insert inside adapter and plate assembly with lever spindle into square

hole on inside of door. (Figure6)

4. Now tighten two screws on the inside adapter

and plate assembly. Do not over tighten. (Figure7)

5. Tighten the lockbody screws. (Figure8)

Figure2

Figure3

Figure4

Figure5

Figure6

Figure7 Figure8

FE6600 and BL6600 Series

Installation Instructions

Multi-Point Lock

FM467 03/20

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

3 Installation (continued)

d Secure Cylinder

1. With the cylinder screwed flush into the

escutcheon face, check that the keyway is

vertical. This ensures that the cylinder retainer

fork will line up with the notch on the side of

the cylinder.

2. Tighten the cylinder retainer to secure the

cylinder.

3. Turn the key in the cylinder to make certain

that the lock functions correctly.

4. Secure the outside front plate to the lockbody.

(Figure9)

Figure9

e Inside Escutcheon

1. Place inside escutcheon flat against door. Align

thumb turn (if provided) with slot in lock body.

(Figure10)

2. Secure the inside escutcheon to the outside

escutcheon using thru-bolt screws provided.

(Figure11)

Figure10

Figure11

FE6600 and BL6600 Series

Installation Instructions

Multi-Point Lock

FM467 03/20

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

3 Installation (continued)

f Inside Lever

1. Place inside lever horizontally onto lever

spindle. Hold lever firmly against the

escutcheon. (Figure12)

2. Use the 1/8" Allen wrench to tighten the set

screw securely. Set screw should seat in the

groove of the inside adapter. (Figure13)

3. Pull on lever to test if set screw is properly

secured. (Figure14)

Figure12

Figure13

Adapter

Lever

Set Screw

Figure14

FE6600 and BL6600 Series

Installation Instructions

Multi-Point Lock

FM467 03/20

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

4 Changing Hand of Trim

Loosen screw (1) and remove interlocking assembly (2). (Figure15A)

Always wear eye protection while working.

1. Unscrew the lower thru-bolt stud (11) with a

3/8" wrench.

2. Remove mounting plate (6) and mounting

posts.

3. Switch mounting posts (7) so they occupy the

opposite positions on the mounting plate (6).

4. Note the original position of the extension

spring (16) and lower plate (9) in the

escutcheon (14). Unhook the extension spring

from pin (13).

5. Remove spring (16), lower plate (9) and

locking hub (8) assembly together.

6. Detach extension spring (16) from lower plate

(9) and locking hub assembly (8).

7. Flip lower plate on locking hub assembly

spindle so that the spring hole is on the

opposite side.

8. Reattach hook end of spring to lower plate.

9. Unscrew cap screw w/spacer (12) using a 5/32"

Allen wrench.

10.Move to opposite hole and tighten firmly.

11.Rotate lever to position shown in Figure16 for

desired hand.

12.Tighten retaining nut (10) firmly by hand and

then back off one notch until pattern shown in

Figure17 appears.

13.Attach bottom of spring (16) (closed loop) to

pin (13). Hold lever horizontal while inserting

locking hub assembly (8) and lower plate (9)

into retaining nut (10) escutcheon with lower

thru-bolt stud (11).

14.Refer to Figure16: Position hub (4) for required

function and hand, and ensure that spindle

(5) is vertical. Note position of interlocking

assembly hook when positioning hub.

Figure B

Figure15

Figure A

Interlocking

Assembly

Bottom

Hook

14 11

12 16

Functions

HubSpindle

Interlocking

Assembly Hook

24, 66 30

Figure16

Figure17

Corbin Russwin is a brand associated with ASSA ABLOY Access and Egress Hardware Group, Inc., an ASSA ABLOY Group company.

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

Corbin Russwin, Inc.

225 Episcopal Road

Berlin, CT 06037 USA

Phone: 800-543-3658

Fax: 800-447-6714

www.corbinrusswin.com

FM467 03/20

4 Changing Hand of Trim (continued)

15.Reposition spindle as shown in Figure18 if necessary.

16.Place the interlocking assembly (2) into the escutcheon and attach the bottom hook to the locking

hub (8) as shown in Figure15B.

17.Secure in place with screw (1).

Caution:

Check that locking hub (4) moves freely by rotating the hub spindle

(5). If not, check that bottom hook is engaged in locking hub (8).

18.Insert and secure mounting plate and

mounting posts to escutcheon with

lower thru-bolt stud (11).

Figure18

Pull Out

Rotate and

Press In

Andere Handbücher für Corbin Russwin FE6600 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Effeff EX118P Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent FM-PE8700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8893 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin BLSS ML2000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin MP9800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Passport 1000 PG Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DL2200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy CYE345 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy multi-t-lock Code Handle Window Bedienungsanleitung

Assa Abloy

Assa Abloy KESO Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FM7100 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YD-01-CON-NOMOD Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 843 Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood 8653 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRC256 Technische Daten

Assa Abloy

Assa Abloy MSL mFlipLock basis Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Assure Lock with Wi-Fi Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent KP Series Installationshandbuch

Assa Abloy

Assa Abloy Aptus Yale Doorman Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 7800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Harmony H1 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRD216 Technische Daten

Assa Abloy

Assa Abloy Yale Doorman Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung