Assa Abloy Corbin Russwin DC8210 Series Bedienungsanleitung

Universal Door Closers

with A3 Heavy Duty

Non-Hold Open Parallel Arm

A3 Arm

Heavy Duty Non-Hold Open

IMPORTANT: An improperly installed or incorrectly adjusted door closer may cause

or and will void product warranty.

To avoid personal injury,

property

damage personal injury;

DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.

Door closers must be securely fastened to a properly reinforced door and frame

with fasteners provided.

An auxiliary door stop, BY OTHERS, is required for this Installation.

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Size of Door&Door Closer

Type

Installation Interior Exterior

In-swinging

Exterior

Out -swinging

Recommended

Closer Size

**Max.

Opening

Force

lbs/f

2 4

2 6

3 0

3 6

4 0

4 6

' "

2 6

3 0

3 6

4 0

' "

Parallel

Arm

RHR LHR

80-9380-8002-152 Rev. 07/09

DC8210 Series

Multi-Sized1thru 6

BEFORE

INSTALLING:

ADA compliant closer: DC8210.

The Americans with Disabilities Act (ADA) requires that doors having door closers

have an opening force not to exceed 5 lbf.

The door closer's power size adjustment feature may require adjustment to its

lowest setting to comply with ADA opening force guidelines.

As Easy As

Installation Instructions

**NOTE: These forces are for standard templating with bearing type hinges and do not account for pressure differentials and draft.

5/8

(16)

REF.

DOOR

FRAME

ADAPTER

PLATE

NOTES:

Check hand of door, see page .

Right Hand Application Shown. Left Hand

Opposite.

Dimensions given in inches (mm). Do Not

Scale Drawing.

Closer must be installed inatrue horizontal

plane to ensure proper closer performance.

80-9380-8002-152 Rev. 07/09

SPACER BLOCK

(When required)

(50.8)

(25.4)

1-1/2

(38.1)

SEE MOUNTING SCREW

SPECIFICATIONS

NOTE: ANGLE SUPPORT MUST BE

DRILLED AND TAPPED IN THE FIELD

447F14 DOOR

FRAME

MAXIMUM

OPENING Adp BApplication

M85 OPTION 447F14

ANGLE SUPPORT BRACKET

90°

180°

7-1/2

(191)

3-1/2

(89)

11-5/8

(295)

7-5/8

(194)

NON

A.D.A.

27-3/4

(705)

23-5/8

(600)

Mark Door and Jamb (for QUIK-INSTALL bracket and arm bracket)

Use template and dimensions charted.

Template

5/8

(16)

FRAME STOP

TOP OF DOOR

HINGE

PIVOT

DOOR

FRAME STOP

2-3/4

(70) 5/8

(16)

1-1/2

(38.1)

1/4

(6.35)

TYP.

15/16

(23.8)

3/4

(19) 1-3/8

(35)

Minimum Clearance

QUIK-INSTALL

BRACKET 754F18

(254)

(25.4)

3-1/16

(77.8)

1/2

(12.7)

Adp

(76.2)

4-3/4

(120.7)

(76.2)

3/8

(9.5)

Parallel Arm

This P age Next Page ( , )

A F

DC8210 x A3 HD Parallel Arm Installation Instructions

Quick Install

Bracket Drop Plate Soffit Bracket

7-7/8

(200)

3-7/8

(98)

Clearance

DROP PLATE

Mounting Holes (4)

754F25

3/8

(10) 1/4-20 THREAD

Drill thru 9/32 (7) Enlarge to

3/8 (10) Dia. This Side Only

(4 Places)

MOUNTING SCREW SPECIFICATIONS

ARM AND BRACKETQUIK-INSTALL

}

or{Sex nuts, furnished

when ordered

#12-14 self-drilling screw.

1/8 (3) diameter pilot hole

required for Wood

Applications.

DOOR

THICKNESS

SEX NUT

LENGTH “L”

1-3/8 (35)

1-3/4 (44)

& OVER

1-9/32 (33)

1-21/32 (42)

80-9380-8002-152 Rev. 07/09

ALL ANGLES SHOWN ARE APPROXIMATE

Connect Arm To Closer

Using 1/8" hex wrench provided, close (turn

clockwise) CLOSING SPEED VALVE (see page

for location on closer). DO NOT OVER TIGHTEN.

Mount QUIK-INSTALL Bracket

Open door to approximately 60°.

Using wrench on underside of spindle, rotate spindle

approximately 135° toward hinge edge of door.

Install arm on spindle at an approximate 90° angle to door.

Reopen CLOSING SPEED VALVE.

Install and tighten 5/16 Hex Head Arm Washer and Screw

assembly.

DOOR

SPINDLE

ARM

CENTERLINE

DOOR

90°

SPINDLE

ROTATED 135°

Rotate 135°

SPINDLE AT REST

Mount Arm to Door Frame

#12-24x5/8 FHMS (4)

60°

DOOR

135°

WRENCH

90°

ARM

DC8210 x A3 HD Parallel Arm Installation Instructions

B C

D E

Start the four mounting screws into the four closer mounting holes.

Place the closer onto the bracket with the four

mounting screws inserted into the four bracket slots.

QUIK-INSTALL

Tighten the four mounting screws to fasten the closer body to the

bracket.QUIK-INSTALL

Mount Closer Body to

BracketQUIK-INSTALL

#12-14X1-1/2 FH SELF-DRILLING (6)

#12-14X1-1/2 FH SELF-DRILLING (4)

1/4-20 X 3/4 FHMS W/ SEX NUTS (4)

This P age

Previous Page(2)

Next Page ( )

80-9380-8002-152 Rev. 07/09

Interior Exterior

Swing

Exterior

Out

Swing

LATCHING

SPEED VALVE

BACKCHECK

INTENSITY VALVE

CLOSING

SPEED VALVE

SPRING POWER ADJUSTER

(1/4 ALLEN WRENCH)"

Size of Door

(Approx.)

Equivalent

Closer Size

DC8200 SPRING POWER ADJUSTMENT CHART

2 4 (712)

2 6 (764)

3 0 (915)

3 6 (1067)

' "

2 6 (764)

3 0 (915)

' "

2 6 (764)

3 0 (915)

3 6 (1067)

4 0 (1219)

' "

Spring Power Adjustment

DC8200 Size1thru 6 Adjustment See Chart

All DC8200 closers are factory set at an approximate

Adjust closer as necessary for door size using this chart.

Readjustment may be required to suit prevailing conditions.

Size 3.

Locate spring power adjuster from Illustration below

Backcheck Intensity Valve

Turn valve COUNTER-CLOCKWISE to reduce backcheck

or CLOCKWISE to increase backcheck. (Backcheck should

be set to give a soft cushioning action, not a sudden stop.)

Latch

Option

M71

Full Cover

(Standard)

Latching Speed Valve

After closing speed has been obtained, turn latching speed valve

CLOCKWISE to SLOW latching or COUNTER-CLOCKWISE to

SPEED latching for last 2 to 5 of door travel.

NOTE: Set combination of CLOSING and LATCHING speeds to

between3and 7 seconds Use of door by handicapped,

elderly or small children may require even greater

closing time.

" "

Closing Speed Valve

To adjust speed of door closing from fully open toaposition

2 to 5 from closed, turn Closing Speed Valve CLOCKWISE

to SLOW closing, COUNTER-CLOCKWISE to SPEED

closing.

" "

(1/8 Allen Wrench Provided)

Delayed Action Valve

Turn valve CLOCKWISE to SLOW closing, COUNTER-

CLOCKWISE to SPEED closing. Delayed action may be

adjusted from 20 seconds to 90 seconds, depending on

degree of door swing. Delay occurs at the beginning of the

door closing cycle from fully open down to 70°, where the

closing speed valve then begins its control.

(1/8 Allen Wrench Provided)

OPTION M71

DELAYED

ACTION VALVE

Insert is removable.

Place in unused opening.

2-7

7-11

11-15

15-17

Spring Power

Adjustment

No. Full Turns

Clockwise

DC8210 x A3 HD Parallel Arm Installation Instructions

Date Stamp

(on end of closer)

MM-YY

MM = Month

YY=Year

Slip cover over closer.

Hold tightly against QUIK-INSTALL® Bracket surface.

Secure on each side with 6-32 x 1/4 PBHMS screws."

Installing Cover

ADJUST CLOSER

This P age

Previous Page(,)

rights reserved. Reproduction in whole or in part without the express written permission

of Corbin Russwin, Inc. is prohibited.

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 1105 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED4000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 351 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Bedienungsanleitung

Assa Abloy

Assa Abloy Pando Mini Go Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton LEO 5700 Series Kurzanleitung

Assa Abloy

Assa Abloy Norton 8000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC3210 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC340 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 8000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Installationshandbuch

Assa Abloy

Assa Abloy RIXSON W50 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9510 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED4600 A Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FIREGUARD 12-2468 Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 5200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7970DPS-B Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Rixson Smok-Chek VI Kurzanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung