Assa Abloy Norton 8000 Series Bedienungsanleitung

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 80-9380-2217-020 Rev 2 (09-17)

ASSA ABLOY

Installation Instructions

Left Hand Door - LH

Right Hand Reverse - RHR Right Hand Door - RH

Left Hand Reverse - LHR

Regular Arm Installation

Adjustable (Sizes 1 thru 6)

S8101

S8301

S8501

Non Hold Open Models

8000 Series

Non Handed Door Closer

• "DA" suffix (Delayed Action) is an optional feature.

• NOTE: For special applications a separate door and frame preparation template is packed with these instructions.

Use this instruction sheet for installation sequence and closer adjustments only.

• Doors should be hung on ball bearing or anti-friction hinges.

• A separate door stop is recommended.

• Door and frame must be properly reinforced.

• Always adjust spring power before adjusting control valves.

• Adjust closing time speed between 3 and 7 seconds from 90° to 0°. Greater closing times may be required for

elderly or handicapped.

• These door closers should NOT be installed on the exposed side (weather side) of exterior doors.

An Incorrectly installed or improperly

adjusted door closer can cause property

damage or personal injury. These

installation instructions should be followed

to avoid the possibility of misapplication or

misadjustment.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 80-9380-2217-020 Rev 2 (09-17)

3/16"

1/4-20

for Wood drill 7/32

Machine Screws

#7 Drill, 1/4-20 Tap

Metal Wood Self Drilling Screws

Wood and Metal

For Wood drill 3/16 hole

* Pilot Hole

Required

Sleeve Nut and Bolt

Thru Bolt and Grommet Nut

Drill 9/32 thru from Closer Side

3/8 Drill other side

Drill 9/32 thru from Closer Side

3/8 Drill other Side

(Optional)

Screw Pack

Regular Arm/Top

Jamb Shoe

Connecting Rod

Forearm

Screw

Main Arm

Closer Arm

Backcheck Valve Power Adjustment Shaft

Latch Valve

Sweep Valve

Closer Body

Cover Clips

Cover Screw

Cover Screws

Metal Cover

Standard With

8500M Series

8400M Cover

Cover Screw

Cover Screws

Standoffs

Architectural Metal Cover

Standard With 8500MA Series

8400MA Cover

Pinion Cap (1639)

Insert Cutouts

Cover

Insert

Standoff

Architectural Plastic Cover

Standard With 8500A Series

8400A Cover

Cover

Insert

Insert Cutouts

Full Cover

Standard With 8500 Series

8400P Cover

Narrow Cover

Standard With 8300 Series

8200P Cover

Mark and Drill Holes

Non Hold Open Door Closers — Regular Arm

8000 Series

ŸDo not scale drawing.

ŸRight hand door shown, left hand opposite.

ŸDimensions are in inches / (mm)

ŸHollow metal door require channel or box type reinforcement

when through bolt mount is specified.

ŸSex bolts required for wood or plastic faced fire door

mounting.

ŸMinimum thickness recommended for reinforcements in

hollow metal doors and frames: .146" (2.66mm) unless

otherwise specified.

Opening

Dimension “A”

Inches

To 100°

7-1/2

191

100° to 130°

152

131° to 180°*

4-1/2

114

1-1/4

(32)

3/4

(19)

5-1/2

(140)

1-3/4

(45) 1-1/8

(29)

12"

(305)

Centerline

of Hinge or Pivot

Frame Rabbet

Door Top

2-9/16

(65)

1-5/8

(41)

Cover

2-1/8

(54)

3-11/16

(94)

3-0

(76)

This template for use with standard butt hinges or 3/4 offset pivots.

For all other hardware, please consult factory for template.

*Door/Frame/Hardware/Wall conditions permitting.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 80-9380-2217-020 Rev 2 (09-17)

Non Hold Open Door Closers — Regular Arm

8000 Series

Pinion Cap or Optional Cover

(2)

Installation Sequence

8300 Series

Screw pinion cap onto pinion shaft by hand or

with a Phillips screw driver - DO NOT OVER TIGTHEN.

*Optional 8500M

Metal Cover Installation

2 Cover

Screws

8400M Cover

2 Clips for metal

covers 8500M

Optional

For

8500 Architectural

Cover Only

90°

*For Optional 8500M

Cover, install clips

before securing

closer to door.

Arm Placement in Shoe

7-1/2 % stronger

7-1/2 % weaker

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 80-9380-2217-020 Rev 2 (09-17)

ASSA ABLOY

8000 Series

Spring Power Adjust

Adjustment Chart

EXTERIOR

INTERIOR

Regular Arm

FULL 360° TURNS

OF 5/16 POWER

ADJUSTMENT

WRENCH

S8101/S8301/S8501

DOOR

*32"

(0.85M)

36"

(0.90M)

42"

(1.00M)

48"

(1.20M)

5811 13

710 13 16

20 FULL (360°) TURNS MAXIMUM AVAILABLE

MAXIMUM DOOR SIZE

Number of Turns Required

Closer is shipped set at mid range setting = 10 turns

The closing force for series 8101, 8301 & 8501 door closers is adjustable

from a size 1 to a size 6, as outlined in ANSI Standard A156.4.

When these series of door closers are installed and adjusted to

conform to ADA reduced opening force requirements (5 lbs max.) for

interior doors, they may not have adequate closing force to reliably

close and latch the door. Power adjustments charted on this page are

recommended where possible, to ensure proper door control.

By law the Americans with Disabilities Act (ADA) may

require that door closer installation comply with

accessability guidelines.

(Use 5/16” Socket or

Adjustable Wrench for

this Adjustment)

CLOSED

70°

10°

(Use 1/8" Hex Wrench

for these Adjustments) Adjust Closing Speed Time to between 3

to 7 seconds from 90°. Use of the door

by handicapped, elderly or small children

may require greater closing time.

Backcheck

Latch

Sweep

Delayed Action

(Optional)

To Identify Date Code:

Mfg.

Date

1FA

3000 Highway 74 East • Monroe, NC 28112

Tel: 800-438-1951 Ext. 4706 • Fax: (800)-338-0965

www. no r tondo or co nt ro ls .c om

Dieses Handbuch passt für folgende Modelle

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Norton 7900H-B Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy King 70 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5200 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7540ST Series Bedienungsanleitung

Assa Abloy

Assa Abloy Rixson Smok-Chek VI Kurzanleitung

Assa Abloy

Assa Abloy Besam SW200i Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1130 Series Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW200i US Handbuch

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron EEB3N Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FM8700 Bedienungsanleitung

Assa Abloy

Assa Abloy SW200 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9300BCH Bedienungsanleitung

Assa Abloy

Assa Abloy Norton UniTrol UNI-1600BC Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YM Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 351 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung