Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Installation Instructions

Attention Installer: Improper

installation may result in damage

to the product and void the factory

warranty.

WARNING

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Concealed Vertical Rod Exit Devices

WARNING

This product can expose you to

lead which is known to the state of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to www.

P65warnings.ca.gov.

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Installation Instructions

Concealed Vertical Rod Exit Devices

Screw Chart

DESCRIPTION

TOTAL QTY

SUPPLIED

WHERE USED

#10 X 1-1/4" FLAT HEAD

WOOD SCREW

(4) CHASSIS

CORNER MOUNTING HOLES

(2) INNER CHASSIS PLATE

(2) 650 STRIKE, TOP

(WOOD FRAME)

(2) 650 STRIKE, BOTTOM

(WOOD FRAME)

#10 X 1-1/4" ROUND HEAD

WOOD SCREW

(2) REAR MOUNTING PLATE

(WOOD DOOR)

#10-24 X 3/8" FILLISTER HEAD

MACHINE SCREW

(1) INNER CHASSIS

#12 X 2" FLAT HEAD

WOOD SCREW

(4) TOP CASE BRACKET

1/4" X 1/2" FLAT HEAD

WOOD SCREW

(2) BOTTOM BRACKET

#10-24 X 1/2" U'CUT FLAT HEAD

MACHINE SCREW

(2) 650 STRIKE, TOP

(METAL FRAME)

(2) 650 STRIKE, BOTTOM

(METAL FRAME)

1/4"-20 X 2" FLAT HEAD

MACHINE SCREW W/ANCHOR

(2) 606 BOTTOM STRIKE

(FIRE RATED)

#8-32 X 5/16" W/ #6 OVAL HEAD

MACHINE SCREW

(2) CHASSIS COVER

FRAME SIDE

(2) END CAP

#8-32 X 5/8" W/ #6 OVAL HEAD

MACHINE SCREW

2(2) CHASSIS COVER

RAIL SIDE

1/4"-20 X 2-3/8" KNURLED FLAT HEAD

MACHINE SCREW

(2) EXIT TRIM

(IF USED)

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

Installation Instructions

Concealed Vertical Rod Exit Devices

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Rail Cutting Guide (Provided)

Support Block (Provided)

Equipment Needed

Tools

Before installation:

1. Fit and hang door.

2. Check the box’s label for the size of the exit device.

The surface of the door where the exit device is to be applied must be flush. Clear away

any raised projections to allow exit device to rest on the flat surface of the door. If shim

kit is required, contact your distributor.

Note: Please refer to trim and other installation instructions provided in the box.

Strike Packs

Strike Pack for

PED5800 WD

Strike Pack for PED5800 A WD

*Note: The PED5800 WD M55 and the PED5800 A WD M55 do not have a bottom strike.

650 Top Strike Pack PED5800 WD

M55 & PED5800 A WD M55

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Installation Instructions

Concealed Vertical Rod Exit Devices

Template for PED5800 WD, PED5800 A WD, PED5800 WD M55 and PED5800 A WD

M55 with PT800 and PT900 Series Trim

39-5/8”

The PT800 and PT900 series trim needs to be attached through the door with (2) 1/4-20 x 2-3/8”

flat head machine screws (GG).

PT900 SERIES

TRIM SHOWN

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Installation Instructions

Concealed Vertical Rod Exit Devices

*Note: The PED5800 WD M55 & the PED5800 A WD M55 do not have a bottom rod assembly.

M52 Cylinder Lockdown

(Exploded View For Clarity)

Slide mounting rail insert with M52

cylinder dogging into mounting rail.

Exploded View

Rod silencer

End cap

INSIDE

LEFT HAND

REVERSE

BEVEL

RIGHT HAND

REVERSE

BEVEL

THIS EXIT DEVICE IS HANDED

CHECK HAND OF DEVICE AGAINST APPLICATION

OUTSIDE

Push rail assembly

Inner chassis

Chassis cover

Top Chassis

Chassis

*Bottom rod assembly

Mounting Plate

Top rod assembly

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

Installation Instructions

Concealed Vertical Rod Exit Devices

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Install inner chassis into door prep.

Note: Wood doors must be prepared b y a wood door manufacturer.

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Installation Instructions

Concealed Vertical Rod Exit Devices

Mark inner chassis mounting holes.

Remove the inner chassis. Pilot

drill inner chassis mounting holes

for #10 wood screws.

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

Installation Instructions

Concealed Vertical Rod Exit Devices

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Install the inner chassis

using two (2) #10 x 1-1/4”

screws (CC).

Install #10-24 x 3/8” fillister screws (HH) to

the inner chassis.

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

PED5800 Series (A WD, WD, A WD M55, & WD M55)

Installation Instructions

Concealed Vertical Rod Exit Devices

Slide bottom rod into the door and thread into the inner chassis.

• Slide top rod into the door and thread

into the inner chassis.

• Ensure the teeth on the top bolt are

facing opposite of the inside face of the

door.

top bolt

teeth

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM608 01/23

Installation Instructions

Concealed Vertical Rod Exit Devices

PED5800 Series (A WD, WD, A WD M55, & WD M55)

• Locate the center chassis on the door

by keying it to the fillister head screw

projecting off the door face.

• Mark the four corner mounting holes.

Andere Handbücher für Corbin Russwin PED5800 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Norton 5500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON W91DCP Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED159 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1130 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC3210 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 3000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1331 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton PR1601 Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 91DCP Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 1105 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 8000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Kurzanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RD3 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW300 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 6200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy CloserPlus Ramp Norton XF460 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung