Assa Abloy UNION DoorSense 8755A Bedienungsanleitung

8755A DoorSense User Guide

plus

Maintenance Test Record

UNION recommend that you read this guide to installing, using and

maintaining DoorSense before beginning any work, and that it is kept in a

safe place for future use.

English Version 3.0

ASSA ABLOY, the global leader

in door opening solutions

DOORSENSE

Contents

DoorSense User Guide

Contents

What is DoorSense? page 3

What’s included with DoorSense page 3

Before you begin… page 4

Preparing DoorSense for installation page 5

Installing DoorSense page 7

Using DoorSense page 9

DoorSense alerts page 11

Maintaining DoorSense page 13

Battery maintenance record page 13

DoorSense maintenance record page 14

DoorSense installation record page 18

CE Marked to EN 1155, the DoP number 0121DCD is

available to view or download at www.uniononline.co.uk/DoP

DoorSense User Guide

What is DoorSense?

DoorSense is a standalone, battery-powered

unit which can be ﬁxed to a door in seconds

to provide a reliable way to keep it open,

and automatically release it if the ﬁre alarm

sounds. DoorSense is designed to react to a

continuous sound of over 65dB when heard

for at least 15 seconds.

DoorSense is incredibly easy to install,

needing no wiring or specialist skills - just

What’s included with DoorSense

3 colour

warning light

Introduction

DoorSense is a battery operated device designed to hold open a fire door safely and legally.

DoorSense will automatically release upon “hearing” the fire alarm. DoorSense can be used

to hold the fire door in any position between open or closed.

It is recommended that a fire door is held open at an angle of more than 65 degrees*.

*Minimum 65

Sound sensor

Foot pedal

Stopper

Batteries

Identification

number

Fixing hole

Tools needed to install

 Screwdriver

 Pen/pencil

 6mm drill bit

(To suit floor type)

 1.5mm drill bit

(To suit door type)

use the ﬁxing template provided. DoorSense

can even be retroﬁtted to doors using older

door release mechanisms.

Once installed you can activate DoorSense

working manually, using either the foot release

or gently pushing the door open wider or

automatically using the pre-set timer release.

3 colour

warning light

Introduction

DoorSense is a battery operated device designed to hold open a fire door safely and legally.

DoorSense will automatically release upon “hearing” the fire alarm. DoorSense can be used

to hold the fire door in any position between open or closed.

It is recommended that a fire door is held open at an angle of more than 65 degrees*.

*Minimum 65

Sound sensor

Foot pedal

Stopper

Batteries

Identification

number

Fixing hole

Tools needed to install

 Screwdriver

 Pen/pencil

 6mm drill bit

(To suit floor type)

 1.5mm drill bit

(To suit door type)

Tools needed to install

Floorplate

without stop

Floorplate

with stop

Adjuster tool

Unit screw pack

4 x silver screws

Floor plate screw pack

4 x black screws

4 x plugs for concrete ﬂoors

2 x C-Type batteries

DoorSense User Guide

Before you begin…

1Ensure the door has been ﬁtted with a door closer which is

working correctly (UNION have an extensive range of door closers

which are ideal for almost any application)

2The ﬂoor underneath the sweep of the door as it opens is level

3The gap between the bottom of the door and the ﬂoor is no less

than 5mm (3/16”) so the door can swing over the ﬂoor plate

4The door opens to an angle of more than 65°

5The building has a ﬁre alarm system installed which is clearly

audible where the door is ﬁtted

aPlease check the following…

DoorSense User Guide

Preparing DoorSense for installation

TIP: If you want to use the release timer, insert

the batteries at 12:00pm (noon) to match the

internal clock to real time.

3A Fully slacken the screw holding the battery

compartment cover with a screwdriver and

lift up from DoorSense unit.

NOTE: the screw will not detach from

compartment.

3B Insert both batteries against the slider of

the battery compartment, in the sequence

shown on the battery slide.

3C Push the ﬁlled battery compartment

back into DoorSense unit body and fasten

retaining screw.

2 Set The Optional Release Timer

Turn the unit over to view the timer settings

on the rear.

Using the supplied tool, move switches

to the desired setting shown opposite.

NOTE:

Switch 3 silences the timer release

warning tone.

Switch 4 is not used for the timer release

function.

3 Insert batteries

DoorSense uses 2 x C-Type alkaline batteries.

Do not use rechargeable batteries.

• DoorSenseunit

• Floorplatewithstop

• Floorplatewithoutstop

• 2xC-typebatteries

• FastenersforxingDoorSenseandthe

ﬂoorplate

• Aninstallationtemplate

• Alarmsensitivityadjustmenttool

1 Check to make sure you have the following:

DoorSense can be used 24/7, which makes it

perfect for continuous trafﬁc applications.

If DoorSense is being ﬁtted to doors in a

building that has periods of no or low usage,

UNION recommend using the time release to

help prevent spread of ﬁre.

DoorSense contains an internal clock which

governs the release timer and the self-testing

features.

The clock is powered by the batteries and

resets when they are removed.

All clock timings are based on 12:00pm (noon)

which is why any replacement of batteries

used in a DoorSense unit should be undertaken

at that time. If this does not suit your situation,

you should calculate any timing differences

between the DoorSense clock time and real

time before adjusting the timer release settings.

• Theclockretainsasmallamountofpower

when the batteries are removed. To ensure

the clock resets properly, wait 10 seconds

between releasing and re-fastening bettery

compartment.

DoorSense User Guide

Preparing DoorSense for installation

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

None

N/A

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

1 only

8pm

8am

Yes

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

2 only

9pm

7am

Yes

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

3 only

N/A

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

1 , 2

10pm

6am

Yes

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

1 , 3

8pm

8am

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

2,3

9pm

7am

1 2 3 4

1 only 8pm 8am Yes

2 only 9pm 7am Yes

1, 2 10pm 6am Yes

1, 3 8pm 8am No

2, 3 9pm 7am No

1,2,3 10pm 6am No

None N/A N/A N/A

3 only N/A N/A No

Switch on

Release

Re set

Warning sound

Alert

1 , 2 , 3

10pm

6am

Key:

YYY

RRR

GGG

RRR

GGG

YYY

Green Light Yellow Light Red Light

GGG

YYY

RRR

Solid Light Slow ash Fast ash

GGG

RRR

Slow ash 10 secs

YYY

RRR

1 ash

YYY

RRR

2 ashes

YYY

RRR

3 ashes

YYY

RRR

1 ash

YYY

RRR

2 ashes

YYY

RRR

1 ash

YYY

RRR

3 ashes

YYY

RRR

2 ashes

YYY

RRR

3 ashes

YYY

RRR

1 ash

YYY

RRR

3 ashes

YYY

RRR

2 ashes

DoorSense User Guide

5When you are satisﬁed that DoorSense

is positioned correctly, place the remaining

2 screws into the round ﬁxing holes and

tighten up all 4 screws to secure the unit

in place.

6When your DoorSense unit is working

correctly, the LED light on the top of the unit

will ﬂash green once every 32 seconds.

 • Iftheunithearsasoundbetween65Db

and 80Db, the ﬂash frequency increases

to once every 1.3 seconds.

 • Longtoneindicatesstartofpoweruptest.

777

Installing DoorSense

• DoorSensecanbeinstalledonsingleor

double doors

• AlwaystDoorSenseatthelockedgeof

a door

• Werecommendyoucheckbatteriesare

inserted before ﬁtting DoorSense to a door

• Checkthetimerreleaseissetcorrectly

• Checkyouareonthesideofdoorwhich

rests against frame, with the ﬁxing

template the correct way round to suit the

door, positioned at the lock edge of the

door and NOT against the hinged side.

Body

1Put the ﬁxing template on the door face

so it rests against frame stop and

bottom edge of door

• Makesurethearrowsonthetemplate

point to lock side of the door frame

and bottom edge of door. If they do

not, turn the template over

2 Markthexingpositionsandremove

the template from the door

3Drill the holes using a size 1.5mm drill

bit to a depth of 25mm

4Offer up DoorSense to the door and

gently ﬁx the unit through the two slotted

holes diagonally opposite each other.

• Openandclosethedoortocheckitcan

still swing easily when DoorSense is

not being used

• Togetthecorrectheightpositionfor

DoorSense, the plunger should contact

the ﬂoor when pushed down

• Iftheplungerisnotincontactwiththe

ﬂoor when pushed down, or it cannot be

pushed down fully, adjust the unit up or

down using the free space within the

slots until you ﬁnd the correct position.

Key:

YYY

RRR

GGG

RRR

GGG

YYY

Green Light Yellow Light Red Light

GGG

YYY

RRR

Solid Light Slow ash Fast ash

YYY

RRR

32 secs

YYY

RRR

repeat

1 ash 1 ash

DoorSense

Alert

What this

means

What you

need to do

DoorSense is beginning power up test.

Nothing.

YYY

RRR

15 secs

4 secs

DoorSense

Alert

What this

means

What you

need to do

DoorSense is working OK and is

“listening” for an alarm.

Nothing.

YYY

RRR

32 secs

YYY

RRR

repeat

1 ash 1 ash

DoorSense User Guide

Floorplate

The ﬂoorplate is essential to ensure

DoorSense works correctly. It is ﬁxed to

the ﬂoor and, when ﬁtted correctly, will retain

the stopper, thus holding the door open.

• ALWAYSinstalltheﬂoorplatetoensure 

DoorSense works correctly

• Therearetwoﬂoorplatesyoucanuse:

° A ﬂoorplate with door stop to

protect walls from door hardware

° A ﬂat footplate without stop for use in

open spaces

• Beforexingﬂoorplate,checkforpipes, 

cables to prevent accidental damage

• Withthefootpedalintheraised

position, open the door to an angle of

at least 65°

• Slidetheﬂoorplateunderthedoorand 

push down on the foot pedal

• Checkthestopperlocatesintothe 

recess of the ﬂoorplate

• Markpositionofﬂoorplatescrewholes 

on ﬂoor surface

• Releasefootpedal,allowdoortoclose 

and remove foot plate

• Fixﬂoorplateinplaceusingscrews 

provided. Take care to use a suitable

drill bit for the ﬂoor.

888

make pics mono

DoorSense User Guide

Using DoorSense

To hold door open

1Open door to cover ﬂoorplate

2Press foot pedal down

3See stopper locate into ﬂoorplate dimple

4Take foot off foot pedal

To release door

1Gently tap foot pedal towards the door face

2Gently push door further open (if room

to do so).

Programmed test releases

° DoorSense will automatically release the

foot pedal 12 hours after batteries are

inserted (resetting the clock) and then

again every 7 days

° If in hold open mode, releasing the foot

pedal will cause door to shut

° If a fault is found, a warning tone sounds

and DoorSense goes into fail safe mode

(foot pedal won’t stay pressed down so

door can’t be held open).

Sound driven release

1Open door as described above

2Let ﬁre alarm sound for 30 seconds

3Look for a single green ﬂash every 1.3

seconds – this indicates DoorSense has

“heard” the alarm

4 DoorSense will release the foot pedal

within 20 seconds allowing door to close

5Listen for a warning tone then a fast ﬂash

green light for 20 seconds before releasing

door

6 DoorSense will take 10 seconds to re-set

itself and be ready to hold door open again

7 UNION recommend conducting weekly

alarm driven tests of your DoorSense.

YYY

RRR

20 secs

YYY

RRR

10 secs

Key:

YYY

RRR

GGG

RRR

GGG

YYY

Green Light Yellow Light Red Light

GGG

YYY

RRR

Solid Light Slow ash Fast ash

YYY

RRR

1 ash

1.3 secs

YYY

RRR

1 ash

repeat

DoorSense

Alert

What this

means

What you

need to do

DoorSense is going to release the foot pedal to allow

the door to close. NB if warning tones are already

switched off there will be no beeps, just the warning

light ﬂashes.

Nothing to DoorSense but check door way is clear

so door can shut and door closer is still operating

correctly.

slow ﬂash

YYY

RRR

20 secs

Followed by the

motor sound

DoorSense

Alert

What this

means

What you

need to do

DoorSense unit is re-setting after release so it can

hold the door open again.

Nothing.

YYY

RRR

10 secs

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Norton 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SW200 Handbuch

Assa Abloy

Assa Abloy Norton PR1601 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW200i Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5900 Series Kurzanleitung

Assa Abloy

Assa Abloy Norton 9540 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton CloserPlus CLP8101 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED4800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SW60 Handbuch

Assa Abloy

Assa Abloy Corbin Russwin DC3210 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED159 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Installationshandbuch

Assa Abloy

Assa Abloy Besam SP33-M Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600H Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC140 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW300 Handbuch

Assa Abloy

Assa Abloy Norton 7900H-B Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 6332 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 351 Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON W50 Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 828 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung