AT&T TRIMLINE 210 Bedienungsanleitung

Part 1

IMPORTANT PRODUCT INFORMATION

Safety information

This symbol is to alert you to important

operating or servicing instructions that

may appear in this user’s manual. Always follow

basic safety precautions when using this product

to reduce the risk of injury, fire, or electric shock.

1. Read and understand all instructions in the

user’s manual. Observe all markings on the

product.

2. Avoid using a telephone during a

thunderstorm. There may be a slight chance

of electric shock from lightning.

3. Do not use a telephone in the vicinity of a

gas leak. If you suspect a gas leak, report it

immediately, but use a telephone away from

the area where gas is leaking. If this product is

a cordless model, make sure the base is also

away from the area.

4. Do not use this product near water, or

when you are wet. For example, do not use

it in a wet basement or shower, or next to

a swimming pool, bathtub, kitchen sink, or

laundry tub. Do not use liquids or aerosol

sprays for cleaning. If the product comes in

contact with any liquids, unplug any line or

power cord immediately. Do not plug the

product back in until it has dried thoroughly.

(Continued)

5. Install this product in a protected location.

Where no one can trip over any line or power

cords. Protect cords from damage or abrasion.

6. If this product does not operate normally,

read In case of difficulty in the user's

manual. If you cannot solve the problem,

or if the product is damaged, refer to the

limited warranty. Do not open this product

except as may be directed in your user's

manual. Opening the product or reassembling

it incorrectly may expose you to hazardous

voltages or other risks.

7. If this product has user-replaceable

batteries, replace batteries only as

described in your user’s manual. Do not burn

or puncture batteries — they contain caustic

chemicals.

8. If this product has a three-prong (grounding)

plug or a polarized plug with one wide

prong, it may not fit in non-polarized

outlets. Do not defeat the purpose of these

plugs. If they do not fit in your outlet, the

outlet should be replaced by an electrician.

CAUTION: Use only the power adapter

provided with this product. To obtain

a replacement, visit our website at www.

telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

SAVE THESE INSTRUCTIONS

Especially about corded telephones

Electrical power: The telephone base must

be connected to a working electrical outlet.

The electrical outlet should not be controlled

by a wall switch. Calls cannot be made from

the handset if the telephone base is un-

plugged or switched off, or if the electrical

power is interrupted.

Power adapter: The power adapter is

intended to be correctly oriented in a vertical

•

or floor mount position. The prongs are not

designed to hold the plug in place if it is plugged

into a ceiling, under-the-table or cabinet outlet.

Especially about

telephone answering systems

Two-way recording: This unit does not sound

warning beeps to let the other party know that

the call is being recorded. To ensure that you are

in compliance with any federal or state

regulations regarding a telephone call, you

should start the recording process and then

inform the other party that you are recording the

call.

FCC and ACTA information

If this equipment was approved for connection to

the telephone network prior to July 23, 2001, it

complies with Part 68 of the Federal

Communications Commission (FCC) rules. If the

equipment was approved after that date, it

complies with the Part 68 rules and with

Technical Requirements for Connection of

Equipment to the Telephone Network adopted by

the Administrative Council for Terminal

Attachments (ACTA). We are required to provide

you with the following information.

1. Product identifier and REN information

The label on the back or bottom of this

equipment contains, among other things, an

identifier indicating product approval and the

Ringer Equivalence Number (REN). This

information must be provided to your local

telephone company upon request. For

equipment approved prior to July 23, 2001,

the product identifier is preceded by the

phrase "FCC Reg No." and the REN is listed

separately. For equipment approved after that

date, the product identifier is preceded by

"US" and a colon (:), and the REN is encoded

in the product identifier without a decimal

point as the sixth and seventh characters

following the colon. For example, the product

identifier US: AAAEQ03T123XYZ would

indicate an REN of 0.3.

The REN is used to determine how many

devices you may connect to your telephone

line and still have them ring when you are

called. In most, but not all areas, the sum of

all RENS should be five (5.0) or less. You may

want to contact your local telephone

company for more information.

2. Connection and use with the nationwide

telephone network

The plug and jack used to connect this

equipment to the premises wiring and the

telephone network must comply with the

applicable part 68 rules and technical

requirements adopted by ACTA. A compliant

telephone cord and modular plug is provided

with this product. It is designed to be

connected to a compatible modular jack that

is also compliant. An RJ11 jack should

normally be used for connecting to a single

line and an RJ14 jack for two lines, see

installation instructions in the user's manual.

This equipment may not be used with coin

telephone lines or with party lines. If you

have specially wired alarm dialing equipment

connected to your telephone line, ensure the

connection of this equipment does not

disable your alarm equipment. If you have

questions about what will disable the alarm

equipment, consult your telephone company

or qualified installer.

3. Repair instructions

If this equipment is malfunctioning, it must

be unplugged from the modular jack until the

problem has been corrected. Repairs to this

telephone equipment can only be made by

4. Rights of the telephone company

If this equipment is causing harm to the

telephone network, the telephone company

may temporarily discontinue your telephone

service. The telephone company is required

to notify you before interrupting service. If

advance notice is not practical, you will be

notified as soon as possible. You will be

given the opportunity to correct the problem

and the telephone company is required to

inform you of your right to file a complaint

with the FCC. Your telephone company may

make changes in its facilities, equipment,

operation, or procedures that could affect

the proper functioning of this product. The

telephone company is required to notify you

if such changes are planned.

5. Hearing aid compatibility

If this product is equipped with a corded or

cordless handset, it is hearing aid compatible.

6. Programming/testing of emergency

numbers

If this product has memory dialing locations,

you may choose to store police, fire

department and emergency medical service

telephone numbers in these locations. If you

do, please keep three things in mind:

We recommend that you also write the

telephone number on the directory card

(if applicable), so that you can still dial

the emergency number manually if the

memory dialing feature doesn't work.

b. This feature is provided only as a

convenience, and the manufacturer

assumes no responsibility for customer

reliance upon the memory feature.

c. Testing the emergency telephone numbers

you have stored is not recommended.

the manufacturer or its authorized agents.

For repair procedures, follow the instructions

outlined under the limited warranty.

You must remain on the line and briefly

explain the reason for the call before

hanging up.

Programming/testing of emergency

numbers should be performed during off-

peak hours, such as in the early morning

or late evening, when the emergency

services tend to be less busy.

Interference information:

Part 15 of FCC rules

Some telephone equipment generates, uses,

and can radiate radio-frequency energy and, if

not installed and used properly, may cause

interference to radio and television reception.

This product has been tested and found to meet

the standards for a class B digital device, as

specified in part 15 of the FCC rules.

These specifications area designed to provide

reasonable protection against such interference

in a residential installation. However, there is no

guarantee that interference will not occur in a

particular installation.

If this product causes interference to radio, VCR

or television reception when it is in use, you

might correct the interference with any one or

all of these measures:

Where it can be done safely, re-orient the

receiving radio, VCR or television antenna.

To the extent possible, relocate the radio,

VCR, television or other receiver with respect

to the telephone equipment.

If this telephone product runs on AC power,

plug your product into an AC outlet that's not

on the same circuit as one used by your radio,

VCR or television.

Modifications to this product, not expressly

approved by the manufacturer, could void the

user's authority to operate the equipment.

•

However, if you do make a call to an

emergency number:

Limited warranty

The AT&T brand is used under license - any

repair, replacement or warranty service, and all

questions about this product should be directed

to: In the United States of America call 1 (800)

222-3111 or visit www.telephones.att.com. In

Canada,dial 1 (866) 288-4268.

1. What does this limited warranty cover?

The manufacturer of this AT&T-branded

product warrants to the holder of a valid proof

of purchase (“CONSUMER” or “you”) that the

product and all accessories provided in the

sales package (“PRODUCT”) are free from

defects in material and workmanship, pursuant

to the following terms and conditions, when

installed and used normally and in accordance

with the PRODUCT operating instructions.

This limited warranty extends only to the

CONSUMER for products purchased and used

in the United States of America and Canada.

2. What will be done if the PRODUCT is

not free from defects in materials and

workmanship during the limited warranty

period (“materially defective PRODUCT”)?

During the limited warranty period,

the manufacturer’s authorized service

representative will repair or replace at the

manufacturer’s option, without charge,

a materially defective PRODUCT. If the

manufacturer repairs the PRODUCT, they may

use new or refurbished replacement parts.

If the manufacturer chooses to replace the

PRODUCT, they may replace it with a new

or refurbished PRODUCT of the same or

similar design. The manufacturer will retain

defective parts, modules, or equipment.

Repair or replacement of the PRODUCT, at

the manufacturer’s option, is your exclusive

remedy. The manufacturer will return repaired

or replacement products to you in working

condition. You should expect the repair or

replacement to take approximately 30 days.

3. How long is the limited warranty period?

The limited warranty period for the PRODUCT

extends for TWO (2) YEARSfrom the date

of purchase. If the manufacturer repairs or

replaces a materially defective PRODUCT

under the terms of this limited warranty, this

limited warranty also applies to repaired or

replacement PRODUCT for a period of either

(a) 90 days from the date the repaired or

replacement PRODUCT is shipped to you or (b)

the time remaining on the original two-year

limited warranty; whichever is longer.

4. What is not covered by this limited

warranty?

This limited warranty does not cover:

• PRODUCT that has been subjected to

misuse, accident, shipping or other physical

damage, improper installation, abnormal

operation or handling, neglect, inundation,

fire, water, or other liquid intrusion; or

• PRODUCT that has been damaged due

to repair, alteration, or modification by

anyone other than an authorized service

representative of the manufacturer; or

• PRODUCT to the extent that the problem

experienced is caused by signal conditions,

network reliability or cable or antenna

systems; or

• PRODUCT to the extent that the problem is

caused by use with non-AT&T accessories;

• PRODUCT whose warranty/quality stickers,

PRODUCT serial number plates or electronic

serial numbers have been removed, altered

or rendered illegible; or

• PRODUCT purchased, used, serviced, or

shipped for repair from outside the United

States of America or Canada, or used

for commercial or institutional purposes

(including but not limited to products used

for rental purposes); or

• PRODUCT returned without valid proof of

purchase (see item 6 below); or

• Charges for installation or setup, adjustment

of customer controls, and installation or

repair of systems outside the unit.

5. How do you get warranty service?

To obtain warranty service in the United States

of America, call 1 (800) 222-3111; in Canada,

please dial 1 (866) 288-4268. NOTE: Before

calling for service, please review the user’s

manual - a check of the PRODUCT controls

and features may save you a service call.

Except as provided by applicable law, you

assume the risk of loss or damage during

transit and transportation and are responsible

for delivery or handling charges incurred in

the transport of the PRODUCT(s) to the service

location. The manufacturer will return repaired

or replaced PRODUCT under this limited

warranty to you, transportation, delivery or

handling charges prepaid. The manufacturer

assumes no risk for damage or loss of the

PRODUCT in transit. If the PRODUCT failure

is not covered by this limited warranty, or

proof of purchase does not meet the terms

of this limited warranty, the manufacturer will

notify you and will request that you authorize

the cost of repair prior to any further repair

activity. You must pay for the cost of repair

and return shipping costs for the repair of

products that are not covered by this limited

warranty.

a. Return the entire original package and

contents including the PRODUCT to the

service location along with a description of

the malfunction or difficulty; and

b. Include “valid proof of purchase” (sales

receipt) identifying the PRODUCT purchased

(PRODUCT model) and the date of purchase

or receipt; and

c. Provide your name, complete and correct

mailing address, and telephone number.

7. Other limitations

to l s or rev

6. What must you return with the PRODUCT to

get warranty service?

you must:

This warranty is the complete and exclusive

agreement between you and the manufacturer

of this AT&T branded PRODUCT. It supersedes

all other written or oral communications

related to this PRODUCT. The manufacturer

provides no other warranty for this PRODUCT.

The warranty exclusively describes all of the

manufacturer's responsibilities regarding the

PRODUCT. There are no other express

warranties. No one is authorized to make

modifications to this limited warranty and you

should not rely on any such modification.

State/Provincial Law Rights: This warranty

gives you specific legal rights, and you may

also have other rights which vary from state

to state or province to province.

Limitations: Implied warranties, including

those of fitness for a particular purpose and

merchantability (an unwritten warranty that

the PRODUCT is fit for ordinary use) are

limited to one year from date of purchase.

Some states/provinces do not allow

limitations on how long an implied warranty

lasts, so the above limitation may not apply to

you. In no event shall the manufacturer be

liable for any indirect, special, incidental,

consequential, or similar damages (including,

Andere Handbücher für TRIMLINE 210

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T MDW 9010 Kurzanleitung

AT&T

AT&T TL90031 Bedienungsanleitung

AT&T

AT&T Merlin Legend 10BS Benutzerhandbuch

AT&T

AT&T MERLIN Plus Stücklistenhandbuch

AT&T

AT&T MDW 9000 Bedienungsanleitung

AT&T

AT&T 902 Bedienungsanleitung

AT&T

AT&T Trimline TR1909 Bedienungsanleitung

AT&T

AT&T Call-a-matlc 2671B1M Gebrauchsanweisung

AT&T

AT&T Merlin Legend BIS10 Bedienungsanleitung

AT&T

AT&T 135 Bedienungsanleitung

AT&T

AT&T SB67108 - AT&T Bedienungsanleitung

AT&T

AT&T 2630DA Bedienungsanleitung

AT&T

AT&T 993 Bedienungsanleitung

AT&T

AT&T 9452 Bedienungsanleitung

AT&T

AT&T TL88102 Leitfaden

AT&T

AT&T CL2909 Bedienungsanleitung

AT&T

AT&T 2630 Bedienungsanleitung

AT&T

AT&T 984 Bedienungsanleitung

AT&T

AT&T ISDN 8510T Bedienungsanleitung

AT&T

AT&T Trimline 230 Bedienungsanleitung

AT&T

AT&T CL4940 Bedienungsanleitung

AT&T

AT&T CL84100 Bedienungsanleitung

AT&T

AT&T 957 Bedienungsanleitung

AT&T

AT&T 2514B Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung