Avenview HDM-SHAREPRO-IP Bedienungsanleitung

www.avenview.com

Remote Screen/Print Sharing Extender over

WIFI / LAN with KVM

Model #: HDM-SHAREPRO-IP

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with

respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product deLCriptions at any

time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in

Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and diLClaims any express or implied warranty, relating to its

products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 4

1.6 Before Installation.................................................................................................................. 5

1.7 Device Description & Layout.................................................................................................. 5

1.8 Installation A .......................................................................................................................... 6

1.9 Installation B .......................................................................................................................... 7

1.10 Installation of Driver and Control Software........................................................................... 8

1.11 Control Software.................................................................................................................... 9

1.12 Disconnect Software............................................................................................................ 10

Section 3: General Troubleshooting..................................................................................................... 11

Section 4: Specifications....................................................................................................................... 12

4.1 PIN & Wiring Standard Definition ........................................................................................ 13

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview HDM-SHAREPRO-IP, RJ45 to HDMI Converter has been tested for conformity to safety

regulations and requirements, and has been certified for international use. However, like all electronic

equipment’s, the HDM-SHAREPRO-IP should be used with care. Read the following safety instructions to

protect yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

HDM-SHAREPRO-IP is an ideal networking display solution; it allows multiple users on the same Ethernet

network to access the display without physically connect their computer directly to the display! The product

supports ONLY ONE connection at a time. Users can now enjoy their favorite multimedia content stored on

their computer from anywhere in their home or office. HDM-SHAREPRO-IP also act as a display extender that

supports up to 1920*1080 resolutions with primary display, mirror desktop and extended desktop video

modes!

Support 1080p Video over TCP/IP,LPR,DHCP,UPnP

Support USB Keyboard and Mouse Wired/Wireless

Supports 500mA electric current for every USB port;

Digital Video HDMI with Audio

Analog Video with VGA and Audio connection

Analog 3.5mm Audio out connection

Converts RJ45 to HDMI

Ethernet IEEE 802 3 10Base IEEE

Standards:802.3 10Base-T;802.3U 100Base-T

Network Interface:10/100/1000Mbps RJ45

Supports the resolution up to 1080p

Allows multiple users to share a Multi-Function Print (MFP) over a network to print, scan, and fax

from any networked computer;

Supports Windows 7,Vista and XP

1.5 Package Contents

Before you start the installation of HDM-SHAREPRO-IP, please check the STANDARD package contents.

-HDM-SHAREPRO-IP x 1

-Power Adapter (5VDC) x 1

-User Manual x 1

-Installation Disc x 1

www.avenview.com

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

1.7 Device Description & Layout

This product is composed of a Converter RJ45 to HDMI

FRONT PANEL & REAR PANEL (Transmitter, HDM-C6IP-S)

1. +5V DC: Connect to 5V DC power supply

3. USB INPUT: Connect ANY mouse/keyboard

wired/wireless adapter.

2. CAT/6: Plug in a CAT6 cable that is connected to

your router on the same IP Network

4. 3.5mm Jack: Stereo audio INPUT connection for

VGA connection.

5. 3.5mm Jack: Stereo audio OUTPUT connection for

VGA connection.

6. VGA: Connects to VGA Monitor with a male-male

cable.

7. HDMI OUT: Connects to a HDMI monitor with a

HDMI male-male cable

Note: Preferred CAT6 and Gigabit 10/1000 Router to ensure HD1080p resolution without delay in

transmission

Important Before starting the insulation please ensure that all devices are powered OFF

www.avenview.com

1.8 Installation A

Please ensure all the package contents are all received.

To setup Avenview HDM-SHAREPRO-IP follow these steps for connecting directly to a Monitor as a

CONVERTER:

1. Connect Converter to CPU with RJ45 cable; follow the standards of TIA-568BLAN

2. Connect your HDMI OR VGA display (such as a LCD TV/PLASMA) to the HDMI OR VGA Port on the

HDM-SHAREPRO-IP.

3. Make sure CAT-5E/6 LAN cable is tightly connected and not loose.

5. Plug in 5V DC power cord to the power jack of the transmitting unit HDM-SHAREPRO-IP.

DIRECT CONNECTION

HDMI CABLE

CAT5E/6

COMPUTER

www.avenview.com

1.9 Installation B

Please ensure all the package contents are all received.

To setup Avenview HDM-SHAREPRO-IP follow these steps for connecting to a Remote Monitor.

1. Connect HDM-SHAREPRO-IP to Wireless or Wired Router with RJ45 cable at the desired Monitor; follow

the standards of TIA-568BLAN

2. Connect your HDMI OR VGA display (such as a LCD TV/PLASMA) to the HDMI OR VGA Port on the

HDM-SHAREPRO-IP.

3. Make sure CAT-5E/6 LAN cable is tightly connected and not loose.

5. Plug in 5V DC power cord to the power jack of the transmitting unit HDM-SHAREPRO-IP.

BOTH OFFICES CAN USE THIS PRODUCT ONCE THE SOFTWAR IS INSTALLED (NB: One at a Time)

ROUTER CONNECTION

BOARDROOM (IP10.0.1.105)

LAPTOP WIRELESS @ OFFICE 1 (IP10.0.1.107)

CPU WIRED @ OFFICE 2 (IP10.0.1.106)

www.avenview.com

1.10 Installation of Driver and Control Software.

Insert Disk and run the Driver.exe file

Select your preferred Language.

From Disk run the Software.exe file

Accept and wait for install to be completed automatically

When completed restart the computer.

You will experience brief periods of dark screens and /or resolution changes during this time.

www.avenview.com

1.11 Control Software

Step 1.

Double-click ICON USB Server file:

On first use, click search and then the software will search the HDM-SHAREPRO-IP automatically.

System will display video converter searched out

Click : (The preferred device to be connected-DISPLAY or MEDIA DEVICE)

Click B: (connect the device), the converter will be automatically connected.

Note :( The system will set up the driver automatically for the first connection) connect the required one by one.

Note :( It is normal if the display is black for seconds in this process.)

Step 2.

Open Control Panel/Display/Screen Resolution, the HDMI output resolution can be set.

Either or Both Selected

www.avenview.com

Take Windows 7 as example:

A. Select the display that needs to adapt. 1 Display is input computer and 2 Display is output device by default.

B. Set up the resolution

C. Set up the display direction

D. Set up the display mode

Note: Short-cut Function: Press”Win+P” to see the following images.

From left to right, Computer only, Duplicate, Extend and Projector only. You can easily switch display mode.

1.12 Disconnect Software

A. Select the device

B. Click the button to disconnect the chose device.

Short-cut function cannot be applied by some computers due to compatibility

Andere Handbücher für HDM-SHAREPRO-IP

Inhaltsverzeichnis

Andere Avenview Extender Handbücher

Avenview

Avenview FO-HDMI-XX-MM Bedienungsanleitung

Avenview

Avenview FO-HDM-1000M-EMI Bedienungsanleitung

Avenview

Avenview FO-HDM-IP4K-SET Bedienungsanleitung

Avenview

Avenview HBT2-C6BPOC-SET Bedienungsanleitung

Avenview

Avenview FO-HDMI-1000M-EMI Bedienungsanleitung

Avenview

Avenview HBT-C6POE-SET Bedienungsanleitung

Avenview

Avenview HBT-C6POE-R Bedienungsanleitung

Avenview

Avenview HDM3D-C53X-SET Bedienungsanleitung

Avenview

Avenview HDM3D-C5SP-8 Bedienungsanleitung

Avenview

Avenview FO-DVI-1080LC-Set Bedienungsanleitung

Avenview

Avenview USB-C6-50M Bedienungsanleitung

Avenview

Avenview HDM-C5SP-4 Bedienungsanleitung

Avenview

Avenview FO-DVI-1080LC-Set Bedienungsanleitung

Avenview

Avenview HDM-C5SP-8 Bedienungsanleitung

Avenview

Avenview FO-DP4K-300-EMIX Bedienungsanleitung

Avenview

Avenview FO-DVI-DL-1000M Bedienungsanleitung

Avenview

Avenview DVI-C5-R Bedienungsanleitung

Avenview

Avenview FO-VGA-DVI Bedienungsanleitung

Avenview

Avenview FO-DP-300-EMI Bedienungsanleitung

Avenview

Avenview C-USB-HDM Bedienungsanleitung

Avenview

Avenview HBT2-C6POH-USB-SET Bedienungsanleitung

Avenview

Avenview HDSD FO-HDSDI-L-SET Bedienungsanleitung

Avenview

Avenview FO-HDM2-T4K-SET Bedienungsanleitung

Avenview

Avenview HDM-C6IP-SET Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung