Avital AviStart 6500 Bedienungsanleitung

AviStart 6500 Owner's Manual - 110698 Rev. B

IWARNING I

!Always exercise caution and common sense when operating

your AviStart system.

!This product is intended for vehicles with fuel-injection and

automatic transmissions only. NEVER attempt to remote start

a vehicle with a manual (stick shift) transmission. Serious

injury may occur with improper use.

!NEVER attempt to remote start the engine while anyone

(including pets) is in the vehicle.

!NEVER attempt to remote start the engine while the vehicle is

in an enclosed area without sufficient ventilation.

!NEVER attempt to remote start the engine while the keys are

in the ignition.

!Always be sure the gearshift selector is in "Park" and the

emergency brake is on before attempting to remote start the

vehicle.

!Keep your AviStart remote controls out of the reach of

children.

!Whenever the vehicle is being serviced or valet parked, place

the system in Protected Valet Mode to prevent accidental or

unauthorized remote starting. See "Protected Valet Mode" on

page 6.

Table of Contents

AviStart 6500...............................2

Lifetime Warranty............................2

Remote Controls ............................2

Stealth CodingTechnology.......................3

Electronic Scan Prevention (ESP).....................3

Instant Remote Control Code Deletion..................3

One-Step Remote Control Code Learning................3

Valet Switch...............................3

Operating Your AviStart..........................4

To Arm The System ...........................4

Remote-Controlled Silent Arm/Disarm .................4

User-Programmable Long-Term Silent Arm/Disarm ...........4

Two-Stage Unlock Capability......................5

Remote Panic with Safety Locks....................5

Interior Light Illumination ........................5

User-Programmable Passive Door Lock .................5

User-Programmable Ignition-Controlled Door Lock/Unlock .......5

User-Programmable RPM Door Lock..................6

Protected Valet Mode ..........................6

Remote-Controlled Valet.........................6

LED System Status Indicator .......................7

Remote-Controlled Trunk Release Capability..............7

Remote-Controlled Accessory Outputs.................7

Zone

™Impact Sensor .........................8

Remote-Controlled Sensor Bypass ....................8

Previous Intrusion Alert .........................8

Specific Zone Intrusion Identification ..................8

User-Programmable Door Ajar Indication ................9

User-Programmable Siren Duration ...................9

Alarm State Memory ..........................9

Automatic Malfunction Override....................9

Remote Engine Start - Safety and Counter-Theft.............10

Remote Engine Start - Operation ....................11

User-Programmable Temperature-Controlled Starting..........12

Pit Stop Mode.............................13

User-Programmable Features.......................14

Programming Table for System Features................15

Programming Table for Remote Controls................16

AviStart 6500 Owner's Manual - 110698 Rev. B

AviStart 6500

Congratulations! You have just purchased the AviStart 6500, a remote engine

starter and security system manufactured by Avital Technologies, Inc. You are

about to experience the convenience and luxury of being able to start your

vehicle engine from the comfort of your home, office, department store or

other remote location.

To fullly benefit from the capabilities of your AviStart system, we encourage

you to read the Owner’s Manual thoroughly before using the system. If you

have any problems or questions regarding your AviStart system, consult the

dealer from whom you purchased this product. To locate an authorized Avital

dealer, contact Avital Technologies directly at 1-800-253-0334 (toll-free

within the U.S.) or 1-847-215-2233.

Lifetime Warranty

Avital guarantees the operation of your AviStart control unit and remote

controls for as long as you own your car. (Please refer to your Lifetime Limited

Warranty Card for complete information.) Make sure that you receive your

warranty card from your dealer, complete the required information and mail

the registration portion to Avital Technologies. You should retain the top

portion of the warranty card for your records.

Remote Controls

Included with your AviStart system are two AviGlo™ 4-button/9-channel

remote controls. Once exposed to light, the AviGlo remote control buttons

will glow, making the buttons visible in the dark.

The remote control (remote) is a miniature transmitter powered by a small

+12 volt battery. The RangeMaster™ super-heterodyne receiver (installed in

your vehicle) allows your remote to command your system from up to

¼ mile away. Obstructions, electrical or radio interference, weather

conditions, window tint or a weak battery can reduce this range. Your remote

is the key to your AviStart system and can be used to arm and disarm your

alarm, lock and unlock your doors, "pop" your trunk, start your engine and

control optional accessories.

The AviStart system can accept up to four Avital remote controls. Additional

remote controls and remote control batteries can be purchased from any

authorized Avital dealer, or by calling Avital Technologies toll-free at

1-800-253-0334 (within the U.S.) or 1-847-215-2233.

AviStart 6500 Owner's Manual - 110698 Rev. B

Stealth CodingTechnology

Stealth Coding technology offers the most advanced protection available

against "code-grabbing" devices which thieves may use to record the digital

code transmitted by your remote control. When you leave the area, thieves

can then play back the code to unlock the doors and deactivate your system.

Avital's remote controls with Stealth Coding randomly change the code every

time you use them, and your system will not respond if any code is

retransmitted. This technology makes code-grabbing devices useless.

Electronic Scan Prevention (ESP)

Your AviStart system also includes ESP, which blocks electronic scanner codes

preventing unauthorized operation of your system.

Instant Remote Control Code Deletion

In the event of a lost or stolen remote control, all remote controls can be

erased from the system's memory preventing unauthorized system operation.

(See the "Programming Table for Remote Controls" on page 16).

One-Step Remote Control Code Learning

The AviStart system allows you to add new remote controls in one step. (See

the "Programming Table for Remote Controls" on page 16).

Valet Switch

The valet switch is a small hidden toggle switch which allows you to control all

of the system's programmable features. (See "User-Programmable Features" on

page14).Thisswitchcanonlybecontrolledwiththeuseofyourignitionkey.

NOTE:Besuretohaveyourdealershowyouwherethevaletswitchislocated.

AviStart 6500 Owner's Manual - 110698 Rev. B

Operating Your AviStart

To Arm The System

The alarm can be programmed for active or passive arming. Active arming

means the alarm can only be armed by the remote control. Passive arming

means the alarm will automatically arm itself. See the "Programming Table for

System Features" on page 15.

Active Arming

Press the remote ARM/DISARM button for 1-2 seconds. The siren will chirp

twice, the parking lights will flash twice, the doors will lock, the LED will flash

slowly and the starter will be disabled.

Passive Arming

Turn the ignition key "OFF," exit the vehicle and close the doors. When the

interior lights turn off, the LED will begin flashing rapidly to indicate the alarm

is passive arming. After 30 seconds, the siren will chirp twice, the parking

lights will flash twice, the LED will flash slowly and the starter will be disabled

(at any time during passive arming, the alarm can be actively armed).

To Disarm the System

Press the remote ARM/DISARM button for 1-2 seconds. The siren will chirp

once, the parking lights will flash once, the doors will unlock, the interior

lights will turn on, the LED will turn off and the starter will be enabled.

Remote-Controlled Silent Arm/Disarm

Press the remote SILENT button for 1-2 seconds to arm or disarm your system

without the usual siren chirps.

Silent Arm Indications

The parking lights will flash twice, the doors will lock, the starter will be

disabled and the LED will flash slowly.

Silent Disarm Indications

The parking lights will flash once, the doors will unlock, the starter will be

enabled and the LED will turn off.

User-Programmable Long-Term Silent Arm/Disarm

This feature allows you to completely disable the arm/disarm siren chirps until

you decide to restore them. (See the "Programming Table for System Features"

on page 15.)

AviStart 6500 Owner's Manual - 110698 Rev. B

Two-Stage Unlock Capability

If the optional Two-Stage Unlock feature was installed, press the

ARM/DISARM or SILENT button for 1-2 seconds and only the driver door will

unlock. Within 3 seconds, press the ARM/DISARM or SILENT button again

and the passenger doors will unlock (may require an optional relay).

Remote Panic with Safety Locks

In a threatening situation, you can activate Remote Panic with Safety Locks.

When activated, the siren will sound and the parking lights will flash. If you

are inside your vehicle and the ignition key is "ON," the doors will lock. If you

are outside the vehicle with the ignition key "OFF," the doors will unlock.

To Activate

1.Press the remote control ARM/DISARM button for 3-4 seconds.

2. The siren will sound and the parking lights will flash.

3.If the ignition key is "OFF," the doors will unlock. If the ignition key is

"ON," the doors will lock.

To Deactivate

1.Press the remote control ARM/DISARM button for 1-2 seconds.

2. The siren will shut off and the parking lights will stop flashing.

Interior Light Illumination

When the alarm system is remotely disarmed, the vehicle interior light(s) will

turn on for 30 seconds or until the ignition key is turned on.

User-Programmable Passive Door Lock

The system will not automatically lock the doors when the alarm passively

arms to prevent the keys and remote from being locked in the vehicle. If you

prefer, you can easily program the alarm to automatically lock the doors every

time the alarm passively arms. (See the "Programming Table for System

Features" on page 15.)

User-Programmable Ignition-Controlled Door Lock/Unlock

For the ultimate in security and convenience, the AviStart is programmed to

automatically lock your doors when the ignition key is turned "ON" or the

engine is started, and will unlock when the ignition key is turned "OFF." This

feature can be programmed ON or OFF. (See the "Programming Table for

System Features" on page 15.)

AviStart 6500 Owner's Manual - 110698 Rev. B

User-Programmable RPM Door Lock

The system can be programmed to automatically lock the doors when the

engine reaches the factory preset RPM level. (See the "Programming Table for

System Features" on page 15). When you begin driving, your vehicle doors

will automatically lock. When you turn the ignition key off, the doors will

automatically unlock.

NOTE: Ignition-Controlled Door Lock feature must be programmed OFF.

Protected Valet Mode

You should place your system in Protected Valet Mode whenever your vehicle

is being serviced by mechanics, car wash personnel or driven by valet parking

attendants. While in the Protected Valet Mode, all remote starter and alarm

functions are bypassed to prevent unauthorized or accidental operation. If a

remote start is attempted, the parking lights will flash 4 times and the vehicle

will not start. Remote-controlled door lock/unlock , trunk release and all

optional accessories will still operate.

To Turn on Protected Valet Mode

1.Turn the ignition key to the "ON" position or start the engine.

2.Flick the valet switch to the "ON" position.

3. The LED will turn on solid red to indicate the system is in the Protected

Valet Mode.

4.Turn the ignition key to the "OFF" position.

To Turn off Protected Valet Mode

1.Turn the ignition key to the "ON" position or start the engine.

2.Flick the valet switch to the "OFF" position.

3. The LED will turn off to indicate the system is no longer in the Protected

Valet Mode.

4.Turn the ignition key to the "OFF" position.

Remote-Controlled Valet

For your convenience, the system can be put into Valet Mode via the remote

control. While in Remote-Controlled Valet, all alarm functions are bypassed.

Remote start, remote-controlled lock/unlock and all optional accessories will

still operate.

NOTE: The system must be disarmed in order to activate the

Remote-Controlled Valet feature.

AviStart 6500 Owner's Manual - 110698 Rev. B

To Activate Remote-Controlled Valet

1.Press the remote control ARM/DISARM and START buttons at the same

time for 1-2 seconds.

2. The parking lights will flash 4 times, and the LED will turn on solid red.

To Deactivate Remote-Controlled Valet

1.Press the remote control ARM/DISARM and START buttons at the same

time for 1-2 seconds.

2. The parking lights will flash 3 times and the LED will turn off.

LED System Status Indicator

The LED on your vehicle dashboard or center console will inform you of the

system status.

LEDStatus

OffSystem is disarmed

On solidIn Protected Valet Mode

Slow flashSystem is armed

Flashing in cyclesSee "Specific Zone Intrusion Identification" on page 8

Rapid flashPassive arming

Remote-Controlled Trunk Release Capability

If you had the optional Trunk Release feature installed, simply press the

remote control TRUNK button for 1-2 seconds to activate your vehicle

electronic trunk release. The trunk will "pop" open. This feature will only work

if your system is disarmed (may require an optional relay).

Remote-Controlled Accessory Outputs

These outputs allow you to add optional remote-controlled accessories to your

system such as a window roll-up, garage door opener or fuel door release. To

activate your optional accessories, see the "Programming Table for Remote

Controls" on page 16.

AviStart 6500 Owner's Manual - 110698 Rev. B

Zone2

™Impact Sensor

The Zone2

Impact Sensor has two individual vibration/impact sensing zones.

Zone #1:

If a less threatening vibration or impact is detected, the siren will issue 2

warn-away chirps. A second violation will also issue 2 warn-away chirps. If

within 45 seconds a third violation is detected, the sensor will automatically

trigger the alarm. The siren will sound and the lights will flash.

Zone #2:

If a more threatening vibration or impact is detected at any time, the siren and

lights will activate instantly.

Remote-Controlled Sensor Bypass

You can bypass the system sensor(s) at any time. The alarm system will still

provide full perimeter protection.

To Bypass the Sensor(s):

1.Press remote SILENT and TRUNK buttons at the same time.

2. The siren will chirp twice...pause...chirp twice...pause...chirp twice.

3.The sensor(s) is now bypassed until you remotely disarm and then re-arm

your system.

Previous Intrusion Alert

If the vehicle had been tampered with and the alarm has been triggered, the

siren will chirp 3 times upon remote disarm instead of the usual 1 chirp.

Specific Zone Intrusion Identification

If the alarm had been triggered in your absence, the siren will chirp 3 times

upon remote disarm (Previous Intrusion Alert). When you enter the vehicle

and turn the ignition "ON," the LED will flash in cycles to specifically identify

which zone triggered the alarm.

LEDZone

1 flash...1 flash...Impact sensor / optional sensor input

2 flashes...2 flashes... Hood trigger

3 flashes...3 flashes... Door trigger

4 flashes...4 flashes... Trunk trigger

AviStart 6500 Owner's Manual - 110698 Rev. B

Andere Handbücher für AviStart 6500

Inhaltsverzeichnis

Andere Avital Autoalarmanlage Handbücher

Avital

Avital 5303 Bedienungsanleitung

Avital

Avital 5103 Bedienungsanleitung

Avital

Avital Point 3 Immobilizer Bedienungsanleitung

Avital

Avital AviStart 6000 Bedienungsanleitung

Avital

Avital AVISTART 6501 Bedienungsanleitung

Avital

Avital AviStar 3300 Bedienungsanleitung

Avital

Avital Phoenix 2 Bedienungsanleitung

Avital

Avital 3300L Bedienungsanleitung

Avital

Avital AviStar 3300 Bedienungsanleitung

Avital

Avital AMX7 Bedienungsanleitung

Avital

Avital 5103 Bedienungsanleitung

Avital

Avital Avistart 4001 Bedienungsanleitung

Avital

Avital Diablo 2 Bedienungsanleitung

Avital

Avital Phoenix 2 Bedienungsanleitung

Avital

Avital Phoenix 2 Bedienungsanleitung

Avital

Avital Bandido 2 Bedienungsanleitung

Avital

Avital Tornado Bedienungsanleitung

Avital

Avital 2100 Bedienungsanleitung

Avital

Avital AMX58 Bedienungsanleitung

Avital

Avital Hurricane 2 Bedienungsanleitung

Avital

Avital 4100 Bedienungsanleitung

Avital

Avital Remote Access Bedienungsanleitung

Avital

Avital 4308L Bedienungsanleitung

Avital

Avital Phoenix Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung