BAFANG UB40 Bedienungsanleitung
1
CONSUMER MANUAL – DP C18.CAN
CONTENT
CONTENT
UB40 DISPLAY MANUAL
1 Important Notice
2 Introduction 3
3 Product Description 4
3.1 Performance 4
3.2 Functions Overview 4
4 Indication Area 5
5 Button Definition 5
6 Normal Operation 6
6.1 Power ON/OFF 6
6.2 Power assistance level selection 6
6.3 Mileage mode and Speed mode 6
6.4 Headlight /backlight 7
6.5 Walk assistance mode 8
6.6 “SERVICE” indication 8
7 User Setting 9
7.1 “SETTING” interface 9
7.2 “Display setting” interface 9
7.3 “Information” interface 13
8 Error Code Definition 15
9 Maintenance 18
FiSHAW 2023
2CONSUMER MANUAL – DP C18.CAN
1 IMPORTANT NOTICE
All usersmust be aware of the
following:
• If the fault information cannot be rectified
according to the instructions, stop operation,
please contact your FiSHAW representative.
• Do not to let the wiring ports and buttons
soak in water.
• Although this product is designed to be
completely waterproof for riding on rainy
days, do not let this product soak in water or
use in water.
• Do not clean the Pedelec with a steam jet,
high-pressure cleaner or water hose. Water
may seep into the electrics or drive and
destroy the equipment.
• Please use this product with care and protect
from strong impacts.
• Do not use thinner or other solvents to clean
any of the Display Control Panel. Such
substances may damage the surfaces.
•Not guaranteed to wear out due to normal
use and wear and tear over time.
FiSHAW 2023
3
INTRODUCTION
CONSUMER MANUAL – DP C18.CAN
2 INTRODUCTION
• Name: smart display and controller (HMI)
• Model: DP C18.CAN
• The housing material is PC, the window is
high hardness glass, as following:
• Cable label identification is as following:
DPC18CP10101.0
PD051205
Note: Contents on this Label contains
important information of this product. Please
keep in a safe place for when needed for
updating of software or providing after-sales
service.
FiSHAW 2023
4CONSUMER MANUAL – DP C18.CAN
3 PRODUCT DESCRIPTION
3.1 Performance
• Operating temperature: -20℃-45℃
• Storage temperature: -20℃-50℃
• Water-proof grade: IP65
• Storage humidity: 30%-70% RH
3.2 Functions Overview
• Speed indication (including maximum speed
and average speed, unit switching between
km and mile).
• Battery capacity indication.
• Control and indication for the headlight
(light senses.
• Brightness adjustment for back light.
• Indication of power assistance level.
• Motor power output and current output
indication.
• Time indication for a single ride.
• Trip indication (including single-trip distance,
total distance and remaining distance).
• Walk assistance mode.
• Support level setting.
• Indication for consumption of energy CALO-
RIES (Note: If the display has this function).
• Indication for the remaining distance. (Note:
the display may not support this function).
• Power-on password setting.
FiSHAW 2023
5
INDICATION AREA
CONSUMER MANUAL – DP C18.CAN
4 INDICATION AREA
1
2
3
4
5
12
SERVICE
1Time indication
2USB charge indication: When external device
connected into the display, it displays
this symbol
3Headlight indication
4Speed scale display
5Mode selection: single-trip distance (TRIP)
→total distance ODO →maximum speed
(MAX) →average speed (AVG) →remaining
distance (RANGE) →energy consumption
(CALORIES) →time (TIME). (Note: some
functions may be unavailable)
6Indication for the current remaining capacity
of battery.
7Voltage indication/percentage indication.
8Speed digital indication.
9Power indication/current indication (with
scale).
10 Power assistance level indication/Walk
assistance, Note: symbol means Walk
assistance mode.
11 Data indication: displays current data corres-
ponding to the mode.
12 “Service”indication.
5 BUTTON DEFINITION
ON/OFF
Up
Down
Mode
Headlight
FiSHAW 2023
6CONSUMER MANUAL – DP C18.CAN
6 NORMAL OPERATION
6.1 Power ON/OFF
Press and hold (>2S) to power on the display, the display beginsto operate. Press and hold
(>2S) again to power off the display.
If the "automatic shutdown" time is set to 5 minutes (it can be set in function "Auto Off"), the HMI
will be automatically turned off within this set time, When it is not operated. If password function is
turned on, than must input correct password to enter into the normal display interface.
6.2 Power assistance level selection
When HMI power on, briefly press or (<0.5S) to switch the assistance level (the number of
assistance levelsneeds to be adapted to controller), The lowest level is Level 0, the highest Level is
5. On the default is Level 1,“0”means no power assistance. The interface is as following:
6.3 Mileage mode and Speed mode
Briefly press (0.5s) to view the mileage and speed information.
1. System with torque sensor, circularly show the trip distance (TRIP)→total distance (ODO) →max-
imum speed (MAX) →average speed (AVG) →remaining distance (RANGE) →energy consumption
(CALORIES) →time (TIME).
2. If system with a speed sensor, circularly show the trip distance (TRIP)→total distance (ODO) →
maximum speed (MAX) →average speed (AVG) →remaining distance (RANGE) →time (TIME).
FiSHAW 2023
7
NORMAL OPERATION
CONSUMER MANUAL – DP C18.CAN
6.4 Headlight /backlight
Press and hold (>2S) to turn on the backlight as well as headlight.
Press and hold (>2S) again to turn off the backlight and the headlight. The brightness of back-
light can be set in function“Brightness”. (If the display is turned on in a dark environment, the display
backlight/ headlight will be turned on automatically. If the display backlight/headlight are turned off
manually, they also need to be turned on manually afterwards)
FiSHAW 2023
8CONSUMER MANUAL – DP C18.CAN
6.5 Walk assistance mode
When your Pedelec is motionless, press button until the Walk assistance indicator is dis-
played. At this point, long press button, the Pedelec enters the walk assistance mode, the indica-
tor Release the button to stop this,if no any operations within 5s will automatically return to 0
level. Then is stopped from the Walk assistance mode.(as following)
6.6 “SERVICE” indication
HMI will prompt for maintenance according to the mileage and battery charger times. When mileage
exceeds 5000km and the "Service" function is enabled, the "SERVICE" indication will be displayed
every time. This function can be set in the interface. Instructions are detailed in the following text.
FiSHAW 2023
9
USER SETTING
CONSUMER MANUAL – DP C18.CAN
7 USER SETTING
7.1 “SETTING” interface
After the HMI powered on, briefly
press(<0.5S) for two times to enter into
the “SETTING”. Briefly press (<0.5S) or
to select and then briefly press (<0.5S) to
confirm and enter into the option.
Select “EXIT” and briefly press(<0.5S) to
exit, or briefly press (<0.5S) twice
in any interface to exit, then the set dates
are saved.
If there is notany operation within 20s, the
set interface will be exited and no data is
saved (as follows).
7.2 “Display setting” interface
In “SETTING” interface, briefly press (<0.5S)
or to select “Display setting” and then
briefly press (<0.5S) to confirm and enter
into “Display setting”. There are thirteen
options in this interface.
7.2.1 “Unit” --- set unit for km/mile
Briefly press (<0.5S) or to select
“Unit”, and then briefly press (<0.5S)
to enter into the interface. Select “Metric”/
“Imperial”, and then briefly press (<0.5S)
to save and exit back to “Unit” interface,
then briefly press (<0.5S) twice to
exit or you can also select “BACK” → “EXIT”
to exit back to the main interface.
FiSHAW 2023
10 CONSUMER MANUAL – DP C18.CAN
7.2.2 “Service Tip” --- turn on/off the
Service indication
Briefly press (<0.5S) or to select
“SERVICE”, and then briefly press (<0.5S)
to enter into the interface. Select “ON/YES”,
and then briefly press (<0.5S) to save
and exit back to “Service Tip” interface, then
briefly press (<0.5S) t t twice to exit or you
can also select “BACK” → “EXIT” to exit
back to the main interface.
7.2.3 “Brightness” --- set backlight
brightness
Briefly press (<0.5S) or to select
“Brightness”, and then briefly press (<0.5S)
to enter into the interface. Select the per-
centage as “100%”/ “75%”/ “50%”/ “30%”/
“10%”. 100% means the highest brightness,
10% is lowest brightness. And then briefly
press (<0.5S) to save and exit back to
“Brightness” interface, then briefly press
(<0.5S) for two times to exit or you can
also select “BACK” → “EXIT” to exit back to
the main interface.
7.2.4 “Auto Off” --- set automatic Off
time
Briefly press (<0.5S) or to select “Auto
Off”, and then briefly press (<0.5S) to
enter into the interface. Select the automatic
Off time as “OFF”/“9”/ “8”/“7” /“6”/“5”/“4”
/“3”/“2”/“1”, OFF means don't turn off.
The unit is in minute. And then briefly press
(<0.5S) to save and exit back to “Auto
Off” interface, then briefly press (<0.5S)
for two times to exit or you can also select
“BACK” → “EXIT” to exit back to the main
interface.
7.2.5 “MAX PAS” --- set riding mode
Briefly press (<0.5S) or to select “MAX
PAS”, and then briefly press (<0.5S)
to enter into the interface. Select support
mode: 3/5/9. And then briefly press (<0.5S)
to save and exit back to “MAX PAS” in-
terface, then briefly press (<0.5S) twice
to exit or you can also select “BACK”
→ “EXIT” to exit back to the main interface.
7.2.6 “Power View” --- set output display
mode
Briefly press (<0.5S) or to select “Pow-
er View”, and then briefly press (<0.5S)
to enter into the interface. Select the output
display mode as “Power” / “Current”. And
then briefly press (<0.5S) to save and exit
back to “Power View” interface, then briefly
press (<0.5S) for two times to exit or
you can also select “BACK” → “EXIT” to exit
back to the main interface. As following:
FiSHAW 2023
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere BAFANG Fahrradzubehör Handbücher
BAFANG
BAFANG E-SYSTEM Bedienungsanleitung
BAFANG
BAFANG DP C01.RS 232.7 Bedienungsanleitung
BAFANG
BAFANG H400 Bedienungsanleitung
BAFANG
BAFANG DP C181.CAN Bedienungsanleitung
BAFANG
BAFANG M510 Bedienungsanleitung
BAFANG
BAFANG DP C18.UART Bedienungsanleitung
BAFANG
BAFANG DP C240.CAN Bedienungsanleitung
BAFANG
BAFANG DP E171.CAN Bedienungsanleitung
BAFANG
BAFANG MM G333.250.C Bedienungsanleitung
BAFANG
BAFANG DP C10.UART Bedienungsanleitung
BAFANG
BAFANG C961 Bedienungsanleitung
BAFANG
BAFANG MM G31.250 Bedienungsanleitung
BAFANG
BAFANG H610 Bedienungsanleitung
BAFANG
BAFANG DP C171.UART Bedienungsanleitung
BAFANG
BAFANG DP C10.UART Bedienungsanleitung
BAFANG
BAFANG DP C10.CAN Bedienungsanleitung
BAFANG
BAFANG C965 Bedienungsanleitung
BAFANG
BAFANG M625 Bedienungsanleitung
BAFANG
BAFANG DP C18.CAN Bedienungsanleitung
BAFANG
BAFANG DP C01.CAN BUS Bedienungsanleitung
Beliebte Fahrradzubehör Handbücher anderer Marken
Sigma
Sigma BC 16.16 Bedienungsanleitung
Playcore
Playcore Dero Setbacks Bedienungsanleitung
VDO Cyclecomputing
VDO Cyclecomputing x3dw Bedienungsanleitung
Cateye
Cateye RAPID X2 Bedienungsanleitung
buratti meccanica
buratti meccanica Clorofilla Trail Bedienungsanleitung
Shimano
Shimano SG-8R20 Betriebsanleitung
