BAFANG DP C230.CAN Bedienungsanleitung

CONTENTS

1.1 Important Notice

1.2 Introduction 2

1.3 Product Description 3

1.3.2 Functional Overview 3

1.4 Display Installation 3

1.5 Display 4

1.6 Butto 4

1.7 Normal Operation 5

1.7.1 Switching the System ON/OFF 5

1.7.2 Assistance Level Selection 5

1.7.3 Lights & Display Backlight 5

1.7.4 Walk Assist 6

1.7.5 Usage Information 6

1.7.6 Battery Capacity 7

1.7.7 USB Charging

1.7.8 Service 7

1.8 Properties 8

1.8.1 “Setting” 8

1.8.2 “Information” 10

DP C230.CAN

1.2 INTRODUCTION

• Model: DP C230.CAN BUS

1.1 IMPORTANT NOTICE

• If the error information from the display

cannot be corrected according to the

instructions, contact your retailer.

• The product is designed to be waterproof.

However, it is highly recommended that you

avoid submerging the display under water.

• Do not clean the display with a steam jet,

high-pressure cleaner or water hose.

• Please use this product with care.

• Do not use thinners or other solvents to

clean the display. Such substances can

damage the surfaces.

• Warranty/guarantee does not cover wear

during normal use and ageing.

1.3 PRODUCT DESCRIPTION

1.3.1

• Operating temperature: -20℃~45℃

• Storage temperature: -20℃~50℃

• Waterproof: IP65

• Bearing humidity: 30%-70% RH

1.3.2 Functional Overview

• Speed display (including top speed and

average speed, switching between km and

miles).

• Battery capacity indicator.

• Automatic sensors to activate the lighting

system.

• Brightness setting for backlight.

• Performance indicator.

• Motor power indicator.

• Total journey time display.

• Odometer (including single-trip

distance, total distance and remaining

distance).

• Walk assistance.

• Assistance level settings.

• Energy consumption indicator in calories

(Note: If the display has this function).

• USB charging port.

1.4 DISPLAY INSTALLATION

1. Open the display’s mounting clamp and

positionthe display on the handlebar.

Tighten the M3*10 screw to secure the

display in position.

The display is suitable for handlebars of

diameter 22.2 mm.

2. Connect the display to the EB-BUS cable.

1.5 DISPLAY

1The display shows the icon if the lights

are on. If an external USB device is

connected, the icon is displayed.

2Current speed.

4Assistance level/ Walk assist.

5Current battery capacity.

6Units in km/h or mph.

7Service: see the service section.

1.6 BUTTON DEFINITION

Down

OK/Enter

Usage Information:

Trip distance (TRIP) - Total distance (ODO) -

Top speed (MAX) - Average speed (AVG) -

Range (RANGE) - Motor power (POWER) -

Energy Consumption (CAL) - Travel time

(TIME).

1.7 NORMAL OPERATION

1.7.1 Switching the System ON/OFF

Press and hold the button (>2 s) to turn on the system. Press and hold the button (>2 s)

1.7.2 Assistance Level Selection

When the display is turned on, press the or (<0.5 s) button to change the assistance level. The

lowest level is 0, the highest level is 5. When the system is switched on, the assistance level starts at

level 1. There is no assistance from the motor at level 0.

1.7.3 Lights & Display Backlight

Hold the (>2 s) button to turn on the headlight, tail light and display backlight.

Hold the

The brightness of the display's backlight can be set in the "Brightness" section of the "Setting"

menu (see page 9). If the display is switched on in a dark environment, the lights will automatically

shutdown time can be adjusted with the " " function (see page 9). If the password function

is enabled, you must enter the correct password to use the system.

Activation: Press the button repeatedly until the icon appears and then hold down the

motor will stop automatically.

Usage information: Trip distance (TRIP) - Total distance (ODO) - Maximum speed (MAX) - Average

speed (AVG) - Range (RANGE) - Motor power (POWER) - Energy consumption (CAL) - Travel time

(TIME).

1.7.4 Walk Assist

Walk Assist can only be activated when the ebike is at a standstill.

1.7.5 Usage Information

Brieﬂy press the (<0.5 s) button to change the usage information displayed.

1.7.6 Battery capacity

1.7.7 USB charging

1.7.8 Service

The indicator displays the current battery capacity. When the battery is fully charged, it shows

meaning that you should charge the battery immediately.

When an external device is connected to the display via the USB port, the USB charging indicator

displays the icon and starts to charge the device (max. Voltage is 5 V, max. Current is 500 mA).

The display shows "Service" every 5,000 km (3,107 miles) or 100 charge cycles completed. This

function can be set in the "Setting" menu.

After the display is turned on, press the

and button at the same time (>2 s), to

access the “PROPERTIES” menu. By pressing

the or button (<0.5 s), you can select:

“Setting”, “Information” or “Exit”. Then press

the button (<0.5 s) to access your

selected option.

Selecting "Exit" in the “PROPERTIES” menu

will return you to the main screen and your

new settings will be saved.

If no button is pressed within 20 seconds,

the display will automatically return to the

main screen and no data will be saved.

Pressing the and buttons at the same

time (>2 s) returns to the main screen.

Selecting “Back” in the “Setting” or “Informa-

tion” menu returns to the “PROPERTIES”

menu.

Press the or button (<0.5 s) to select

“Unit” in the “Setting” menu, and then

press the button (<0.5 s) to access it.

Then with the or button choose

“Metric” (kilometers) or “Imperial” (miles)

and press the button (<0.5 s) to save

and return to the “Setting” menu.

1.8 PROPERTIES

1.8.1 “Setting”

Press the or button (<0.5 s) to select

"Setting", and then brieﬂy press the

button (<0.5S) to access the following

options:

1.8.1.1 “Trip Reset” Reset mileage

Press the or button (<0.5 s) to select

“Trip Reset” in the “Setting” menu, and

then press the button (<0.5 s) to access

it. Then with the or button choose

“YES” or “NO” and press the button

(<0.5 s) to save and return to the “Setting”

menu.

1.8.1.2 “Unit” Selection (km/miles)

1.8.1.3 “Sensitivity” Automatic light

sensitivity

1.8.1.4 “Brightness” Display brightness

1.8.1.5 “A

1.8.1.6 “Vibration” Vibration function ON/OFF

1.8.1.7 “Service” N

Press the or button (<0.5 s) to select

“Sensitivity” in the “Setting” menu, and

then press the button (<0.5 s) to access

it. Then with the or button choose a

sensitivity level between 0 and 5 and press

the button (<0.5 s) to save and return to

the "Setting" menu.

Press the or button (<0.5 s) to select

“Brightness” in the “Setting” menu, and

then press the button (<0.5 s) to access

it. Then with the or button choose a

brightness between 10% and 100% and

press the button (<0.5 s) to save and

return to the "Setting" menu.

Press the or button (<0.5 s) to select

then press the button (<0.5 s) to access

it. Then with the or button choose a

setting between 1 and 9 minutes, or "OFF".

Press the button (<0.5 s) to save and

return to the "Setting" menu.

Press the or button (<0.5 s) to select

“Vibration” in the “Setting” menu, and

then press the button (<0.5 s) to access

it. Then with the or button choose

“ON” or "OFF". Press the button (<0.5 s)

to save and return to the "Setting" menu.

Press the or button (<0.5 s) to select

“Service” in the “Setting” menu, and

then press the button (<0.5 s) to access

it. Then with the or button choose

“ON” or "OFF" and press the button

(<0.5 s) to save and return to the "Setting"

menu.

Press the or button (<0.5 s) to select

“Wheel Size” in the “Information” menu, and

then press the button (<0.5 s) to access

it. Press the button (<0.5 s) again to

return to the "Information" menu.

“Wheel Size” is displayed for information

only and cannot be changed.

After the display is turned on, press the

and button at the same time (>2 s), to

access the “PROPERTIES” menu.

Press the or button (<0.5 s) to select

button (<0.5 s) to access the following

information:

1.8.2 “Information”

Press the or button (<0.5 s) to select

“Speed Limit” in the “Information” menu,

and then press the button (<0.5 s) to

access it. Press the button (<0.5 s) again

to return to the "Information" menu.

1.8.2.1 Wheel Size

1.8.2.2 Speed Limit

1.8.2.3

Battery Info

Content Explanation

b01 Current temperature in

degrees (°C)

b04 Total Voltage (V)

b06 Discharge Current (A)

b07 Remaining Capacity (mAh)

b08 Full charged Capacity (mAh)

b09 Default Loader Status (%)

b10 Instant charge (%)

b11 Charging cycles (number)

b12 Maximum time in which no

charge was made (Hr)

b13 Last Uncharged Time (Hr)

d00 Total Cell Number (individual)

d01 - d10 Cell Voltage 1 to 10 (m/V)

Press the or button (<0.5 s) to select

“Battery Info” in the “Information” menu,

and then press the button (<0.5 s) to

access it. Then press the or button to

scroll through the information options

shown in the table below.

Press the button (<0.5 s) to return to the

"Information" menu.

“Speed Limit” is displayed for information

only and cannot be changed.

Andere Handbücher für DP C230.CAN

Inhaltsverzeichnis

Andere BAFANG Fahrradzubehör Handbücher

BAFANG

BAFANG DP C240.CAN Bedienungsanleitung

BAFANG

BAFANG MM G333.250.C Bedienungsanleitung

BAFANG

BAFANG BT C01.340.UART Referenzhandbuch

BAFANG

BAFANG DP C10.UART Bedienungsanleitung

BAFANG

BAFANG C965 Bedienungsanleitung

BAFANG

BAFANG M625 Bedienungsanleitung

BAFANG

BAFANG DP C10.CAN Bedienungsanleitung

BAFANG

BAFANG DPC-10 Biktrix Bedienungsanleitung

BAFANG

BAFANG UB40 Bedienungsanleitung

BAFANG

BAFANG DP C240.CAN Bedienungsanleitung

BAFANG

BAFANG C965 Bedienungsanleitung

BAFANG

BAFANG DP C181.CAN Bedienungsanleitung

BAFANG

BAFANG DP C171.UART Bedienungsanleitung

BAFANG

BAFANG DP E08.CAN Bedienungsanleitung

BAFANG

BAFANG DP C18.UART Bedienungsanleitung

BAFANG

BAFANG M510 Bedienungsanleitung

BAFANG

BAFANG E-SYSTEM Bedienungsanleitung

BAFANG

BAFANG M800 Bedienungsanleitung

BAFANG

BAFANG H400 Bedienungsanleitung

BAFANG

BAFANG DP C18.CAN Bedienungsanleitung

BAFANG

BAFANG DP C10.UART Bedienungsanleitung

BAFANG

BAFANG DP C15.UART Bedienungsanleitung

BAFANG

BAFANG H600 Bedienungsanleitung

BAFANG

BAFANG H610 Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung