Bang & Olufsen Celestial BOC60 Series Bedienungsanleitung

Installation Manual

BOC60 Series

Celestial™Collection

BOC66, BOC62

Table of Contents

Introduction 1

Specifications 2

What’s Included 3

Tools & Items 3

Wire Recommendation 3

Speaker Placement 4

About Speaker Wire 5

Installing the Wire 5

Wire Routing 6

Cutting the Hole 7

Installing the Bayonet Ring 7

Connecting the Wire 8

Installing the Speaker 8

Testing & Adjustments 9

Installing the Grille 9

Troubleshooting 10

Technical Assistance 11

Warranty 12

Return Process 13

Thank you for purchasing the Celestial™ 6 In-Ceiling Speaker. Origin Acoustics and

Bang & Olufsen take pride in providing you with high quality products. All of our

speakers are designed to have excellent sound quality, longevity, and a simple

installation process.

This instruction booklet covers the necessary information for a smooth installa-

tion, including: the tools you will need, step-by-step instructions for installation,

troubleshooting tips for any errors that may occur, and all warranty information.

If for any reason you experience problems or if you have installation questions

please call us at (844) 674-4461. Hours of operation are 8:00am to 5:00pm (Pacific

Time), Monday through Friday.

Introduction

Model BOC66 BOC62

Part Number SCBOC60600 SCBOC60200

Woofer Cone Glass Fiber IMG

Woofer Diameter 6.5” (165mm) 6.5” (165mm)

Tweeter Dome Silk DPSD Silk DPSD

Tweeter Diameter 1” (25mm) 1” (25mm)

Frequency Response 43 Hz - 20 kHz 48 Hz - 20 kHz

Impedance 6 ohm Minimum 6 ohm Minimum

Power Handling 25 - 150 Watts 25 - 125 Watts

Diameter 9.61” (244mm) 9.61” (244mm)

Grille Diameter 10” (254mm) 10” (254mm)

Cutout Diameter 8.75” (222mm) 8.75” (222mm)

Mounting Depth 5.01” (127mm) 3.72” (94mm)

Specifications

Speaker Bayonet Ring Grille Template

What’s Included

• Drywall Saw

• Speaker Wire

• Pencil

• Wire Stripper

• Measuring Tape

• Drill

• Drill Bit ⅛” (3mm)

• Stiff Wire

• Stud Finder

• Fish Tape

Tools & Items

The gauge of wire used can have an impact on the performance of your speakers.

Use a multi-stranded wiring designed for amplifier to speaker connections. Which

gauge to select depends on the length of wire to be used on any particular speak-

er. The longer your run is, the larger your wire size must be.

Wire Recommendation

Wire Length Wire Gauge

0 -100’ (0 - 30m) 16 (1.5mm²)

50 - 150’ (15 - 45m) 14 (2.5mm²)

Over 100’ (30m) 12 (4mm²)

Ideally, the two speakers should be

placed an equal distance from the lis-

tener. If the room has a lower ceiling,

the speakers can be closer together.

Also, if the speaker placement is in-

tended for standing (as opposed to

sitting) listeners, the speakers can be

closer together.

Auxiliary Room (2 Speaker Placement)

The Le Rear (LR) and Right Rear (RR)

speakers should be installed just be-

hind the listener, one on either side.

The Center Channel (CC) speaker

should be placed above and slightly

in front of the television, with the Le

Front (LF) and Right Front (RF) speak-

ers placed equidistant to either side.

Home Theater (7 Speaker Placement)

Strip ¼ to ½ inches (6 to 12 mm) of the

insulation o both ends of the wire. To

avoid stray strands, twist them at the

end. Connect the wire to the amplifier,

and make sure the wire connected to

the le speaker output will be routed

to the le speaker, right output to right

speaker, etc.

1. Installing the Wire

Use a two conductor wire that allows you to identify one conductor from the oth-

er. This designation may be obvious or as subtle as a ridge on one conductor.

It’s crucial that you keep track of which wire you use for positive (+) and negative

(-). Typically if the wires are colored red and black, the red wire is used for positive

and the black wire is used for negative, but sometimes other colors or patterns

are used. You can choose whichever color of wire you want to be positive and

negative as long as you remain consistent throughout the install.

On both your amplifier and your speaker the connectors will be identified as red

for positive and black for negative. It is very important to look carefully at the

speaker wires and be certain that the same wire that is attached to the positive

connector in the amplifier is attached to the positive connector in the speaker.

About Speaker Wire

0.25 - 0.5”

(6 - 12mm)

Speaker

Wire

Plan how you’ll route the wire to the desired speaker location. There are several

methods for routing the wire, and you may need to combine several of them.

Wire Routing

One option is to li up the carpet and

route “tape wire” under the carpet.

Under the Carpet

The wire can be routed behind the

baseboard by cutting a groove out of

the back of the baseboard, or by buy-

ing special baseboard designed for

concealing wires.

Behind the Baseboard

When available, you can route the wire

through an attic or crawlspace.

Attic or Basement

When running wires through a wall, be

sure to avoid all obstacles such as AC

wiring, pipes, and ducts.

Through Walls

If these speakers are being installed in a new home during construction, the

installation process will be a bit dierent (although much simpler). For these

situations, it’s recommended you purchase a bracket. Instructions on how to

install the speakers are provided with the bracket, or can be found on our web-

site. Visit www.originacoustics.com for more information.

For New Construction

Adjust the clips so that they’re positioned at the top of the rail. If they’re not al-

ready there you can do this by pushing the metal release tabs on the inside of the

rail and pulling the clips to the top of the rails. Insert the bayonet ring into the hole

in the ceiling by gently bending the rails inward. Reach inside the bayonet ring

and push the clips down so that the bayonet ring is firmly in place, but not too

tight. If the bayonet ring needs to be removed, reach inside and push the release

tabs to reset the clips The bayonet ring can now be taken out.

When you’ve decided on the locations for all of the speakers, use the template to

trace a circle lightly in pencil where the hole should be. (Refer to the Specifications

section for cutout sizes.) If you’re unsure on whether there may be obstacles (such

as pipes or wires) where you plan on installing the speaker, drill a ⅛ inch hole

in the center of the circle, then put a bent coat hanger through the hole to feel

around. Use a keyhole or drywall saw to cut the hole.

2. Cutting the Hole

Push Tabs

Against Rail

3. Installing the Bayonet Ring

(Unlocked)

Bayonet Ring

Twist Clockwise

to Lock

1. Fit into Ring

2. Twist into Ring

Fit the speaker into the bayonet ring, and twist it clockwise into place. When the

lines on the speaker line up with the lines on the bayonet ring, that means the

speaker is tightly in place. Be sure that the lines line up, otherwise there’s a risk

that the speaker will fall out of the ceiling.

5. Installing the Speaker

Push down to open the connector.

Insert the wires into the connectors,

making sure that the positive wire is

being attached to the red connec-

tion and the negative wire is being

attached to the black connection. If

the wires are switched, speaker perfor-

mance will be drastically impacted.

4. Connecting the Wire

Speaker

Wire

Connector

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bang & Olufsen Sprecher Handbücher

Bang & Olufsen

Bang & Olufsen BeoLab 9 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 5 6881 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beosound Explore Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 3500 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolit 17 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay A9 3rd Generation Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay P6 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay P6 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoPlay A9 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 2 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 4 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay A9 4th Generation Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beovox CX50 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolit 15 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 9 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoSound 35 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEOPLAY A2 ACTIVE Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 4000 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 4 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 7-1 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 5 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beosound Emerge Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoSound 2 3rd Generation Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beovox RL Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung