Body Solid G5S Bedienungsanleitung

Body-Solid

Assembly Instructions

1Be careful to assemble all components

in the sequence they are presented.

Inch

A. Insert two Foot Caps (9) into the ends of Rear Base Frame (B). Insert Convex End Cap (3) to

the top of Rear Vertical Frame (C).

B. Attach Main Base Frame (A) to Rear Base Frame (B) and Rear Vertical Frame (C) using:

Two 52 (1/2” x 3 1/2” hex head bolt)

Four 57 (1/2” washer)

Two 55 (1/2” nylon lock nut)

C. Insert two Foot Caps (9) to the ends of Side Base Frame (D).

D. Attach two Side Base Frames (D) to Main Base Frame (A) using:

Two 47 (3/8” x 3” hex head bolt)

Four 58 (3/8” washer)

Two 56 (3/8” nylon lock nut)

E. Insert Weight Stack Shim (20) to Main Base Frame (A).

Connect Frame Leveler (87) to Main Base Frame (A).

Insert Convex End Cap (3) to the side of Main Base Frame (A) as shown.

NOTE:

Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.

STEP

2Be careful to assemble all components

in the sequence they are presented.

Inch

A. Attach Angled Support Frame (E) to Main Base Frame (A) using:

Two 43 (1/2” x 3 1/4” hex head bolt)

Four 57 (1/2” washer)

Two 55 (1/2” nylon lock nut)

B. Insert Convex End Cap (4) to the front of the Top Frame (F).

Attach Top Frame (F) and Plate (86) to the Rear Vertical Frame (C) using:

Two 43 (1/2” x 3 1/4” hex head bolt)*

Three 57 (1/2” washer)

One 55 (1/2” nylon lock nut)

*NOTE:

The top bolt (43) goes into an internally threaded nut inside the Top Frame (F).

C. Attach Top Frame (F) and Plate (86) to Angled Support Frame (E) using:

Two 41 (1/2” x 4 1/4” hex head bolt)

Four 57 (1/2” washer)

Two 55 (1/2” nylon lock nut)

D. Attach Pec Dec Frame (G) to Angled Support Frame (E) in the bottom two holes as shown using:

One 42 (1/2” x 3 3/4” hex head bolt)

Two 43 (1/2” x 3 1/4” hex head bolt)

Five 57 (1/2” washer)

Two 55 (1/2” nylon lock nut)

Attach two Curved End Caps (3) to Pec Dec Frame (G) as shown.

NOTE:

Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.

STEP

Be careful to assemble all components

in the sequence they are presented.

Inch

A. Above the Pec Dec Frame (G) connect the Leg Extension Frame (H) to Angled Support

Frame (E) using:

Two 43 (1/2” x 3 1/4” hex head bolt)

Four 57 (1/2” washer)

Two 55 (1/2” nylon lock nut)

B. Attach the Leg Extension Frame (H) to Main Base Frame (A) using:

One 40 (1/2” x 5 1/2” hex head bolt)

Two 57 (1/2” washer)

One 55 (1/2” nylon lock nut)

C. Attach Left Pec Dec Arm (J) to Pec Dec Frame (G) using:

One 45 (1/2” x 3/4” hex head bolt)

One 57 (1/2” washer)

Attach Left Pec Dec Handle (K) to Left Pec Dec Arm (J) using:

One 64 (5/16” x 3/4” round allen head bolt)

One 60 (5/16” spring lock washer)

D. Attach Right Pec Dec Arm (L) to Pec Dec Frame (G) using:

One 45 (1/2” x 3/4” hex head bolt)

One 57 (1/2” washer)

Attach Right Pec Dec Handle (M) to Right Pec Dec Arm (L):

One 64 (5/16” x 3/4” hex head bolt)

One 60 (5/16” spring lock washer)

E. Attach two Chrome Round End Cap (34) to the top of the Left Pec Dec Handle (K) and one to the

top of the Right Pec Dec Handle (M) as shown, and tighten Allen Screw (67).

Attach two Chrome Collars (35) one to the bottom of the Left Pec Dec Handle (K) and one to the

bottom of the Right Pec Dec Handle (M) as shown, and tighten Allen Screw (27).

F. Attach one Rubber Stop (23) to the front of Leg Extension Frame (H).

Attach two Rubber Stops (23) to the Pec Dec Frame (G).

Attach one Rubber Stop (23) to the horizontal pillar sticking out of the Angled Support Frame (E)

as shown.

NOTE:

Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.

STEP

4Be careful to assemble all components

in the sequence they are presented.

Inch

A. Attach two Convex End Caps (3) to the top of Seated Press Arm Support (N).

Attach Seated Press Arm Support (N) to Top Frame (F) using Shaft (73), and tighten

Allen Screw (66).

B. Attach Seated Press Arm (P) to Seated Press Arm Support (N) using Shaft (74), and tighten

Allen Screw (66).

Attach two 1” X 2” Convex End Caps (6) to the top of the Seated Press Arm (P).

C. Attach two Seated Press Handles (Q) to Seated Press Arm (P) using:

Six 62 (3/8” x 5/8” flat allen head bolt)

Six 92 (3/8” bent lock washer)

Foam Grip (83) and Round End Cap (16) are preinstalled.

D. Attach Foot Plate (R) to Adjustable Chrome Frame (S) with Shaft (76) and tighten Allen Screw (27).

E. Slide Adjustable Chrome Frame (S) into Main Base Frame (A) and hold in place with T-Shaped

Pop Pin (26).

Slide two Round End Caps (7) into the openings on the top of the Adjustable Chrome Frame (S)

as shown.

NOTE:

Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.

STEP

5Be careful to assemble all components

in the sequence they are presented.

Inch

A. Slide two Plastic Bushings (78) into Back Pad Holder (T) as shown.

Attach Back Pad Holder (T) To Angled Support Frame (E) using:

Two 43 (1/2” x 3 1/4” hex head bolt)

Four 57 (1/2” washer)

Two 55 (1/2” nylon lock nut)

B. Slide Convex End Cap (3) into Chrome Back Pad Frame (U) as shown.

Slide Chrome Back Pad Frame (U) into Back Pad Holder (T) and hold in place with

T-Shaped Pop Pin (26).

C. Slide two 1” X 2” Convex End Caps (6) into Back Pad Frame (V) as shown.

Attach Back Pad Frame (V) to Chrome Back Pad Frame (U) as shown with a T-Shaped

Pop Pin (85), and using:

One 62 (3/8” x 5/8” allen bolt)

One 58 (3/8” washer)

D. Attach two Leg Hold Downs (W) to the Angled Support Frame (E) using:

Two 53 (3/8” x 3 1/4” hex head bolt)

Four 58 (3/8” washer)

Two 56 (3/8” nylon lock nut)

C. Attach two Foam Rollers (17) onto Leg Hold Downs (W) and hold in place with two Roller End

Caps (8) as shown.

F. Attach Back Pad (X) to Back Pad Frame (V) using:

Two 51 (5/16” x 1 3/4” hex head bolt)

Two 60 (5/16” spring lock washer)

Two 59 (5/16” washer)

G. Insert Flat Allen Head Bolt (69) into Chrome Back Pad Frame (U), this will help hold the Chrome

Back Pad Frame (U) in place.

NOTE:

Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.

STEP

Andere Handbücher für G5S

Inhaltsverzeichnis

Andere Body Solid Fitnessgeräte Handbücher

Body Solid

Body Solid GMR10B Kurzanleitung

Body Solid

Body Solid EXM-3250.2 Bedienungsanleitung

Body Solid

Body Solid GCSR349 Bedienungsanleitung

Body Solid

Body Solid DGYM Bedienungsanleitung

Body Solid

Body Solid FMH Bedienungsanleitung

Body Solid

Body Solid GLA348Q Bedienungsanleitung

Body Solid

Body Solid DIOT.2 Bedienungsanleitung

Body Solid

Body Solid POWERLINE PLT200 Bedienungsanleitung

Body Solid

Body Solid GPR370.1 Bedienungsanleitung

Body Solid

Body Solid Sissy GSS50 Kurzanleitung

Body Solid

Body Solid GMR20 Kurzanleitung

Body Solid

Body Solid GLA348Q.1 Bedienungsanleitung

Body Solid

Body Solid LPH-1100.1 Bedienungsanleitung

Body Solid

Body Solid GAB300 Bedienungsanleitung

Body Solid

Body Solid S2SP Bedienungsanleitung

Body Solid

Body Solid SPR500P2 Bedienungsanleitung

Body Solid

Body Solid Powerline PSC-43X Bedienungsanleitung

Body Solid

Body Solid DLEC.3 Bedienungsanleitung

Body Solid

Body Solid Powerline PLA1000 Bedienungsanleitung

Body Solid

Body Solid GLA400 Bedienungsanleitung

Body Solid

Body Solid GDR24 Bedienungsanleitung

Body Solid

Body Solid POWERLINE PSS-60X Bedienungsanleitung

Body Solid

Body Solid GFT100 Kurzanleitung

Body Solid

Body Solid LVLE Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung