Bowflex Revolution FT Bedienungsanleitung

Bowflex Revolution®FT

Owner’s Manual

and Fitness Guide

Special Edition Includes:

Dr. Ellington Darden’s

Six Week Fast Fat Loss –

Body Leanness Program

PN001-7059 RevB (10/28/2009)

Owner’s Manual and Fitness Guide Table of Contents

SafetyPrecautions 1

SafetyWarningLabels 2

Getting to Know Your Bowflex Revolution®FT Machine 4

Using Your Bowflex Revolution®FT Functional Trainer

SpiraFlex®Resistance 5

Adjusting And Understanding the Resistance 5

Attaching SpiraFlex®Resistance Packs 6

Preparing for Use, Storing, and Moving 7

Maintenance 8

Adjusting Cable Tension 9

Cable Routing and Storage 10

Attaching Accessories 12

HandGrips 12

FootHarnesses 12

SquatHarness 12

CompanionEquipment 13

Defining Your Goals 14

Reaching Your Goals 15

Designing Your Own Program 15

Exercising Properly

Working Out 16

Warming Up 16

Breathing 16

Performing Your Routine 16

CoolDown 16

The Workouts

20 Minute Better Body Workout 17

Advanced General Conditioning 17

20 Minute Upper/Lower Body 18

BodyBuilding 19

Circuit Training – Anaerobic/Cardiovascular 20

StrengthTraining 21

Exercises 22

ChestExercises 23

ShoulderExercises 31

BackExercises 42

ArmExercises 48

AbdominalExercises 57

LegExercises 60

MuscleChart 69

ExerciseLog 71

Bowflex®Body Leanness Program 73

WarrantyInformation 92

Contact Information 95

Product Speciﬁcations

Dimensions (arms raised) 64.5” L x 37.8” W x 73” H (163.8cm x 98cm x 185.4cm)

Workout Area 84” x 84” (213.4cm x 213.4cm)

SpiraFlex®Resistance 200 lbs. (90.72 kg)

SpiraFlex®Upgradability 280 lbs. (127 kg)

Maximum User Weight 300 lbs. (136 kg)

Safety Precautions

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

PRIOR TO USING THIS EQUIPMENT,

OBSERVE THE FOLLOWING WARNINGS.

IMPORTANT SAFETY INSTRUCTIONS

The following deﬁnition applies to the word “Warning” found throughout this manual:

7!2.).'

!44%.4)/.

$!.'%2

)--%$)!4%!#4)/.2%15)2%$

#!54)/.

• Read and understand the Owner’s Manual

prior to using this machine.

• Read and understand all Warning Labels on this machine.

• Keep children away from this machine and/or supervise

them closely if they are near the machine or are present

during its operation. This machine is not suitable as a

children’s toy. There is a natural tendency for children

to want to play on exercise equipment, and parents and

others in charge of children should be aware of their

respective responsibilities. Moving parts that may appear

to present obvious hazards to adults may not appear to do

so to children.

• Consult a physician prior to commencing an exercise

program. If, at any time, you feel faint or dizzy, or

experience pain, stop and consult your physician.

• Inspect this machine for loose parts or signs of wear. Pay

special attention to Cables and Belts and their connections.

Do not use if found in this condition; contact Nautilus

Customer Service.

• This machine is designed for a User’s Weight Limit of 300

pounds (136 kg). Do not use if you are over this weight.

• This machine contains moving parts. Use Caution. Do not

wear loose clothing or jewelry.

• Set up and operate this machine on a solid level surface.

• This machine is for Consumer use only.

• Do not use additional means to increase the resistance

(lifting load) of this machine.

• Set up the machine so that there is a workout area of at

least 84” x 84” (213.4cm x 213.4cm) of free space for safe

operation of the Bowflex Revolution®FT functional trainer.

Keep third parties out of this area when the machine is in

use.

• Operate the machine in the manner described in this

manual. It can be hazardous to over-exert yourself during

exercise.

• Make sure that all positional adjustment devices are

securely engaged.

2Safety Warning Labels

Home Gym

The following safety warnings are located on the Bowﬂex Revolution®FT exercise machine. Please

read all safety precautions and warning information prior to using your product. Be sure to replace any

warning label if damaged, illegible, or missing. If you need replacement labels, please call a Bowﬂex

Representative at 1-800-628-8458.

Label 1

Label 3

Label 2

Serial number

Safety Warning Labels

The following safety warnings are located in site specic areas on the unit. Please review and understand the safety

warning labels and their locations on the unit prior to use.

If you need to replace a warning label please call 1-800-628-8458 to obtain a new label.

Label 1: General use safety label.

Location: Front of the main unit.

Label 2: Keep hands away.

Location: Below freearms on main unit.

Label 3: Check all equipment before use.

Location: Bottom front of the main unit.

Bowflex Revolution®FT Parts Reference Guide

Please take your time to read through the entire manual and follow it carefully before attempting to use your

Bowflex Revolution®FT functional trainer. Also locate and read all warning labels that are posted on the machine.

It’s important to understand how to properly perform each exercise before you do so using SpiraFlex®Resistance.

The image below shows the machine set up in just one of many configurations. Included as standard accessories

with your new Bowflex Revolution®FT are hand grips, foot harnesses, and squat harness. Instructions for attaching

various accessories, storing cables, and changing out components are included later in this manual, as well as in

the Assembly Manual.

Getting to Know Your Bowflex Revolution®FT Machine

Cable

Variable

Pulley System

Hand Grip

Standing Platform

Adjustable Arms

SpiraFlex®

Resistance

Packs

Engine

Housing

Tension Control

Knob

Lower Pulley

Squat Frame

Pulleys

Transport Wheels

SpiraFlex®Resistance

The Bowflex Revolution®FT functional trainer features

an ingenious patented technology called SpiraFlex®.

The functional trainer’s muscle-building resistance

comes in the form of these cleverly designed resistance

packs, each constructed with a heavy-duty elastic strap

inside the pack. When you perform an exercise, these

resistance packs rotate around the center, stretching

the elastic strap and creating resistance.

A significant advantage of the resistance packs is

that the resistance is present throughout the ENTIRE

range of motion. That gives you a more consistent,

gym-quality experience – which means your muscles

get a bigger burn, a better workout and faster results.

SpiraFlex®technology is a non-inertial resistance

mechanism that provides the smoothness and feel of

gym-quality plate-loaded machines, but eliminates the

excessive bulk and weight. This totally unique, state-

of-the-art resistance system involves wrapping an

elastic strap tighter and tighter around a coil, which

is contained in a small canister that looks very similar

to free weight plates, but weighs only a few pounds.

Because no metal parts are used, SpiraFlex®technology

is quiet, lightweight, portable, and safe.

Adjusting And Understanding

The Resistance

The Bowflex Revolution®FT trainer comes with 200

lbs. (90.72 kg) of resistance. The SpiraFlex®resistance

plates look very much like free weight plates and are

assigned a pound rating based on their resistance –

including 5, 10, 20, and 40-pound packs (2.27kg, 4.54kg,

9.07kg, 18.14kg). The real power of the workout is in the

RESISTANCE, not the weight. And that means you can

quickly and easily stack these lightweight resistance

plates on to the Bowflex Revolution®FT – just like free

weights – and get a great workout.

To upgrade to 280 pounds

(127 kg) of resistance please

call 1-800-663-6315

Using Your Bowflex Revolution®FT Functional Trainer

6Using Your Bowflex Revolution®FT Functional Trainer

Attaching SpiraFlex®Resistance Packs

During assembly, you attached 5-lb (2.27kg) SpiraFlex®

resistance packs to the machine. The 5-lb packs are

permanently attached to the machine. The Bowflex Revolution®

FT functional trainer comes with 200 lbs (90.72kg) of resistance

packs in 5, 10, 20, and 40-lb packs (2.27kg, 4.54kg, 9.07kg,

18.14kg).

Attaching resistance packs is simple. You simply select the

resistance pack and slide it onto the shaft, making sure the

rounded edge of the hole in the plate is matched up with the

rounded edge of the shaft (see photos to the right). Once you

push the pack all the way onto the shaft, press and turn the

plate counterclockwise about 10 degrees until the locking

tabs click into place. While applying pressure, turn the plate

clockwise until the index marks on the packs are aligned.

NOTE: It is extremely important to make sure that

all six locking tabs engage to ensure proper and safe

operation of the machine. Check that the pack is

seated evenly, with no extra gap behind the bottom

edge of the pack.

You can choose any combination of resistance packs to suit

your needs. Each pack needs to be installed in the same

manner, by placing the pack onto the shaft, sliding it all the way

to the housing, and turning it counterclockwise until the locking

tabs engage. Then turn it clockwise so that the index marks

on each pack are aligned. If you are using multiple resistance

packs, each one contains locking mechanisms to stack multiple

packs.

You can set resistance either symmetrically or offset. What this

means is that you can set resistance to 40 lbs (18.14kg) on one

side and 60 lbs (27.22kg) on the other side, or set both sides to

60 lbs, or 60 lbs on one side and nothing on the other side--or

any variation like that. Setting resistance on one side is useful

when doing one-sided exercises such as trunk rotations or hip

extensions. You do not always have to have the same amount

of resistance on each side. Doing so, however, is common for

symmetrical exercises such as bench press or chest fly.

For an animated demonstration of proper pack installation,

visit the FAQ section of the Bowflex Revolution®website at

www.bowflexrevolution.com.

Step 1: Place resistance pack on shaft, matching

rounded top of hole with rounded top of shaft. Push

resistance pack all the way onto shaft.

Step 2: While pressing pack towards machine, turn

counterclockwise about 10 degrees until all six plate

tabs lock into place. Then turn clockwise until index

marks are aligned.

Index marks

The Bowflex Revolution® FT functional trainer provides a large range of exercises. Preparing your machine for use

and maintaining your machine are simple.

Preparing for Use

Before using your Bowflex Revolution®FT trainer, make sure you read through all of the safety warnings in this

manual, and pay close heed to the warning labels on the machine. Additionally, inspect the machine prior to each

use to ensure all parts are in good working order.

Preparing to Exercise

To do exercises, read the instructions in this manual or on the exercise poster included with your machine. Each

exercise uses a unique set of adjustable arm positions and cable connections. Using your Bowflex Revolution®FT

functional trainer should be easy:

• Select the desired resistance plates

• Position the adjustable arms to the correct setting

• Attach cable clips to appropriate location

• Complete the exercise

A full description of each exercise is included later in this manual.

Moving & Storing Your Machine

The full assembled weight of your machine is in excess of 200 lbs. It is imperative that you observe all safety

warnings and cautions when using or moving your machine. To move your machine, raise the adjustable arms to

the 0 position and make sure they are locked in place. Hook the D-handle Hand Grips to the hooks at the front of the

Standing Platform. Carefully lift the front of the machine to shift its weight to the back transport wheels. You can

now roll the machine.

Preparing for Use, Storing, and Moving

Raise adjustable arms to 0 position

(see above photo) and lock in place.

Attach hand grips to loops at the

front of the Standing Platform.

To move the machine, use hand

grips to lift the front of the unit and

shift its weight onto the transport

wheels at the back of the base.

8Maintenance

When you store your machine, it is advisable to raise the adjustable arms to the 0 position and make sure

they are locked in place.

Preventative Maintenance

Keeping your machine in good repair takes a minimal amount of time, and will ensure you have many

years of use. In addition to preventative maintenance such as checking to make sure the unit is clean and

free from defects, wiping down surfaces, and keeping attachments in a secure location, maintenance

should be limited.

Daily

Wipe down with a damp cloth. Pay special attention to areas where perspiration could settle.

Monthly

Inspect the unit for loose parts, nuts, bolts, etc. Inspect ropes and straps for fraying or excessive wear.

Yearly

Remove the Top Cover and inspect the condition of the internal components.

Look for fraying or excessive wear on straps, ropes, and moving parts, and replace as necessary.

Andere Handbücher für Revolution FT

Inhaltsverzeichnis

Andere Bowflex Heim-Fitnessstudio Handbücher

Bowflex

Bowflex Xtreme SE Bedienungsanleitung

Bowflex

Bowflex ULTIMATE 2 Bedienungsanleitung

Bowflex

Bowflex Xtreme SE Bedienungsanleitung

Bowflex

Bowflex SelectTech 3.1 Bedienungsanleitung

Bowflex

Bowflex BOWFLEX XTREME.SE Bedienungsanleitung

Bowflex

Bowflex SelectTech 4.1 Bedienungsanleitung

Bowflex

Bowflex Conquest Bedienungsanleitung

Bowflex

Bowflex SelectTech 4.1 Bedienungsanleitung

Bowflex

Bowflex Xceed Bedienungsanleitung

Bowflex

Bowflex ULTIMATE 2 Bedienungsanleitung

Bowflex

Bowflex RevolutionXP Bedienungsanleitung

Bowflex

Bowflex Xceed Bedienungsanleitung

Bowflex

Bowflex Xtreme Bedienungsanleitung

Bowflex

Bowflex Classic Bedienungsanleitung

Bowflex

Bowflex Bowflex Xtreme 2 SE Bedienungsanleitung

Bowflex

Bowflex Conquest Bedienungsanleitung

Bowflex

Bowflex PR1000 Bedienungsanleitung

Bowflex

Bowflex SelectTech 3.1 Bench Montage- und Bedienungsanleitung

Bowflex

Bowflex HOME GYM Bedienungsanleitung

Bowflex

Bowflex Revolution FT Bedienungsanleitung

Bowflex

Bowflex BOWFLEX XTREME.SE Bedienungsanleitung

Bowflex

Bowflex Motivator 2 Bedienungsanleitung

Bowflex

Bowflex SelectTech 5.1 Bedienungsanleitung

Bowflex

Bowflex Xtreme 2 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung