Bristan ELVIRA SHWR PK Montageanleitung

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave

them with the user.

Installation

Instructions and User

Guide

Elvira Exposed Sequential

Shower Pack & Exodus

Thermostatic Surface Mounted

Mini Shower Valve

Models covered:

ELVIRA SHWR PK, EXD SHXAR C

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers. Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Contents

Thank you for choosing Bristan, the UK’s leading showers and taps expert.

Your Bristan mixer tap is a thermostatic mixer incorporating a wax capsule

thermostat to ensure constant temperatures. These instructions are for your

guidance to a safe and successful installation and should be left with the user.

All products manufactured and supplied by Bristan are safe providing they are

installed correctly and receive regular maintenance in accordance with these

instructions.

Important Safety Information ............................................... 3

General Information .................................................................. 4

Product Features........................................................................ 5

Speciﬁcations .............................................................................. 6

Dimensions ................................................................................... 7

Pack Contents............................................................................. 8

Installation Requirements....................................................... 9-12

Flow Regulators.......................................................................... 13-14

Prior to Installation..................................................................... 15

Installation .................................................................................... 16-18

Shower Valve....................................................................... 16-17

Riser Rail................................................................................ 18

Operation..................................................................................... 19

Commissioning........................................................................... 20

Maintenance................................................................................. 21-22

Troubleshooting ......................................................................... 23-25

Guarantee...................................................................................... 26

3Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Important Safety Information

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they

are installed, used correctly and receive regular maintenance in accordance

with these instructions.

•If you are in any doubt about your ability to install this product safely you

must employ the services of an experienced qualiﬁed plumber.

•Do not use if the showerhead or shower hose has been damaged or is

blocked.

•Do not crush or kink thw shower hose, this could damage the hose and

cause leaks.

•Remove all packaging and check the components for damage before

starting installation.

Warning: Before starting any installation please consider the following:

Prior to drilling into walls, check that there are no hidden electrical wires,

cables or water supply pipes. This can be checked with the aid of an

electronic detector.

•If power tools are used do not forget to:

Wear eye protection

Unplug equipment after use

•Important: Remember to turn o the mains water supply before connecting

to any existing pipe work. The ﬁtting of isolating valves is required as close

as is practical to the supply inlet feeds of the thermostatic mixing valve

Warning: Before installing the new ﬁtting it is essential that you

thoroughly ﬂush through the pipework in order to remove any remaining

swarf, solder, etc.

Failure to carry out this procedure could cause problems or damage to the

workings of the ﬁtting.

• This product must not be modiﬁed in any way as this will invalidate the

guarantee.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers. Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

General Information

This product has been tested to comply with the BS EN 1287:1999 (LP) and

BS EN 1111:1999 (HP) thermostatic mixing valve standards.

BS6700 recommends the temperature of stored water should never exceed

65ºC. A stored water temperature of 60ºC is considered sucient to meet

all normal requirements and will minimise the build-up of lime scale in hard

water areas.

If the ﬁtting is installed at low pressure (tank fed), then the minimum distance

from the highest installed position of the showerhead to the underside of the

cold tank should be at least 1 metre to ensure adequate performance.

Note: Nominally equal (balanced) inlet supply pressures are recommended for

optimum performance with mixer showers.

This shower valve should be installed in compliance with the Water Supply

(Water Fittings) Regulations 1999 and the Scottish Byelaws 2004.

If in doubt, contact a registered plumber or your Local Water Authority or the

Secretary of The Institute of Plumbing, address as follows:-

The Institute of Plumbing,

64 Station Lane,

Hornchirch,

Essex, RM12 6NB

Tel: 01708 472791

Tel:01708 472791

Recommended Usage

Domestic Heavy

Commercial

Light Commercial Health Care

5Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Product Features

On/O and Temperature Control

Turn the control anti-clockwise to

turn the shower on and increase the

temperature.

Turn the control clockwise to de-

crease the temperature and to turn

o the shower

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers. Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Speciﬁcations

Inlet connections: 15mm compression with adjustable centres.

Operating pressure range: Min. 0.1 bar - Max. 5.0 bar - Maximum

recommended imbalance between hot and cold supply should not exceed a

ratio of 5:1.

Maximum Static Pressure: 10 bar

Maximum outlet temperature: Factory pre-set to 42°C (can be re-set to suit

site conditions)

Supply requirements:

Minimum cold water supply temperature: 5°C.

Maximum cold water supply temperature: 25°C.

Maximum hot water supply temperature: 80°C.

(a maximum hot water supply temperature of 60 - 65°C is recommended for

ablutionary purposes)

Note: The inlet hot water temperature must be at least 10°C above the

required blend temperature (eg. mixer temperature 43°C: minimum hot

supply 53°C).

7Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Dimensions (mm’s)

110 - 155

Centres

685

*ELVIRA SHWR PK handset is shown in drawing.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers. Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Pack Contents

1. Shower Valve

2. Covers x 2

3. Filters x 2 (Pre-ﬁtted)

4. Long Elbows x 2

5. Green ﬂow regulator (Pre-ﬁtted)

6. Yellow ﬂow regulator (Pre-ﬁtted)

7. Backplate ﬁxings x 2

8. Shower head (Multifunction)

9. Sealing washers x 2

10. Shower hose

11. Riser rail

12. Riser rail ﬁxings x 4

13. Hexagonal Key

*ELVIRA SHWR PK handset is shown in drawing.

9Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Installation Requirements

This shower valve must be installed

in compliance with current water

regulations. If you have any

doubts about the water regulation

requirements contact your local

water services provider or use the

services of a professional plumber.

This shower valve is suitable for

use with the following water supply

systems:

• Gravity Fed Hot and Cold

(pressure balanced)

• Gravity Fed Hot and Mains

Cold (dierential pressure - see

Speciﬁcation section on page 6)

• Instantaneous water heater

(combination boiler)

• Unvented System

• Pumped System

Gravity Fed Hot and Cold Gravity Fed Hot and Mains Cold

cold mains supply cold mains supply

Important: If you install this

shower valve with a gravity fed

system, there must be a minimum

head (vertical distance) from the

underside of the cold water storage

tank to the outlet of at least 1 metre.

Note: Pumped system (with Essex

ﬂange) If you install this shower

valve to a pumped gravity fed system

where the minimum head (vertical

distance) from the underside of the

cold water storage tank to the top

of the hot water cylinder is less than

1 metre we recommend an Essex

ﬂange is used as shown.

Flushing Pipe-work

Important: Before connecting

the shower valve (see ‘Installation’

on pages 16-17), the supply pipe-

work must be ﬂushed to clear debris

before connecting the mixer tap.

Debris will reduce the performance

and life of the mixer.

1. Shower Valve

2. Covers x 2

3. Filters x 2 (Pre-ﬁtted)

4. Long Elbows x 2

5. Green ﬂow regulator (Pre-ﬁtted)

6. Yellow ﬂow regulator (Pre-ﬁtted)

7. Backplate ﬁxings x 2

8. Shower head (Multifunction)

9. Sealing washers x 2

10. Shower hose

11. Riser rail

12. Riser rail ﬁxings x 4

13. Hexagonal Key

1m min.

min.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers. Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.

Installation Requirements

Unvented SystemInstantaneous Water Heater

Pumped System

cold mains supply

Pumped System (with Essex ﬂange)

cold mains supply

1m min.

Key:

1m min.

50mm

If less

than

1m see

note.

Isolating

Valve

Reducing

Valve

Shower

Valve

Pump Essex

Flange

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan Value VAL BSM C CD Verdrahtungsschema

Bristan

Bristan CART 06734B Original Betriebsanleitung

Bristan

Bristan Mios MIO BSM C Verdrahtungsschema

Bristan

Bristan Palermo PA BSM C Bedienungsanleitung

Bristan

Bristan W BTH12 C Bedienungsanleitung

Bristan

Bristan Blade BL BAS C Bedienungsanleitung

Bristan

Bristan Z 1/2 C Bedienungsanleitung

Bristan

Bristan HY POWSHX W Montageanleitung

Bristan

Bristan VAL2 BAS C CD (D2) Verdrahtungsschema

Bristan

Bristan MIO BAS C (D1) Verdrahtungsschema

Bristan

Bristan H64WMT2 Montageanleitung

Bristan

Bristan PIV BSM C Bedienungsanleitung

Bristan

Bristan WASTES W BATH09 C Verdrahtungsschema

Bristan

Bristan OR2 SHXSM C Montageanleitung

Bristan

Bristan WMNT12 Montageanleitung

Bristan

Bristan CR SHXDIVFF C (D7) Verdrahtungsschema

Bristan

Bristan W BTH PU1 C/G Bedienungsanleitung

Bristan

Bristan KN2 SHXAR C Montageanleitung

Bristan

Bristan Java J SFSNK EF C Bedienungsanleitung

Bristan

Bristan Target TG SNK C Bedienungsanleitung

Bristan

Bristan Liquorice Kitchen Sink Tap Verdrahtungsschema

Bristan

Bristan Prism Bedienungsanleitung

Bristan

Bristan R2 SHXRR C Montageanleitung

Bristan

Bristan Rio RO 1/2 C Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung