Bristan IRBS4-CP Montageanleitung

Models Covered:

IRBS4-CP, IRBS4-BN

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave

them with the user.

Installation Instructions

and User Guide

Infrared Temperature Control

Automatic Basin Spout

Thank you for choosing Bristan, the UK’s leading showers and taps expert.

Your Bristan basin spout has a non-touch control which uses infrared sensing

technology to detect human presence. Once detected, the spout instantly

dispenses water and automatically stops once the user moves their hands

away to eliminate unnecessary water wastage, whilst creating a more hygienic

washroom solution.

All products manufactured and supplied by Bristan are safe and comply to

legislative requirements. Providing they are installed correctly and receive

regular maintenance in accordance with these instructions your user

experience will not be aected.

For a safe and successful installation these instructions should be used as

guidance, thereafter they should be left with the user.

Contents

• Important Safety Information 3

• Speciﬁcation 4

• Product Features 5

• Dimensions (mm) 5

• Installation Requirements 6

• Installation 7

• Installation - Electrical Connections 8

• Installation - Water Connections 9

• Operation 10

• Maintenance 11

• Troubleshooting 12-13

• Notes 14-15

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Contents

• Before starting any installation

please consider the following: before

drilling into walls, check that there are

no hidden electrical wires, cables or

water supply pipes. This can be checked

with the aid of an electronic detector.

• If power tools are used do not

forget to:

- Wear eye protection

- Unplug equipment after use

• Fitting isolating valves to the

inlet feeds is required for ease of

maintenance.

• Warning: Before installing

the new spout it is essential

that you thoroughly

ﬂush through the pipework

in order to remove any remaining swarf,

solder, etc. Failure to carry out this

procedure could cause problems or

damage to the workings of the spout.

• This product must not be modiﬁed

in any way as this will invalidate the

guarantee.

• Please read these instructions

thoroughly and retain for future use.

• All products manufactured and

supplied by Bristan are safe provided

they are installed, used correctly

and receive regular maintenance in

accordance with these instructions.

• If you are in any doubt about

your ability to install this product

safely you must employ the

services of an experienced qualiﬁed

plumber/electrically qualiﬁed

person.

• Warning: Do not

operate the product

if you suspect it is

frozen. Do not site the

product where it might be subjected

to freezing conditions.

• These ﬁttings need to be

installed in accordance with, and

meet the requirements of the Water

Supply (Water Fittings) Regulations

1999

and current byelaws.

• Remove all packaging and check

the contents for damage before

starting installation

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 3

Important Safety Information

This product has been tested to meet the

requirements of the Water Regulations

Advisory Scheme (WRAS) and satisﬁes

the requirements of the Water Supply

(Water Fittings) Regulations 1999 and

current byelaws.

BS 6700 recommends the temperature of

stored water should never exceed 65°C.

A stored water temperature of 60°C is

considered sucient to meet all normal

requirements and will minimise the build

up of limescale in hard water areas.

This product should be installed in

compliance with the current Water

Regulations.

If in doubt, contact a registered plumber

or your Local Water Authority or the

Secretary of The Institute of Plumbing,

address as follows;-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex, RM12 6NB

Tel:01708 472791

Operating Pressure Range:

Min. 1.0 Bar - Max. 5.0 Bar

Maximum Static Pressure: 10 Bar

Inlet Water Supply Temperature Range:

5°C - 45°C

Power Supply: AC: 220V-240V; 50/60HZ

DC: 6V

(4 x AA alkaline batteries - Not Supplied)

Power Consumption: Static <0.3MW

Active: <3W

Sensing Range: 30-32cm

Self-close Override Time: 30 seconds ±5

seconds

Recommended Usage

Domestic Heavy

Commercial

Light

Commercial Health Care

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Speciﬁcation

Water Ecient

When the users hands enter the sensing

range, the indicator light in the sensor

will illuminate. Water will ﬂow out

immediately until the user draws their

hands back from the sensor.

The water will automatically stop after

a maximum of 30 seconds ±5 seconds

to avoid wasting water. If more water is

required wait 3 seconds and then place

hands back in the sensing range.

Temperature Control

Manual temperature control lever allows

users to set preferred temperature.

More Hygienic

The proximity sensor removes the need

to touch the spout body, reducing

the spread of germs and reducing the

chance of cross infection.

Battery Override

In the event of a power failure, the

product will automatically switch to

battery operated mode to ensure the

spout continues to function. The tap can

also operate on the battery alone if no

mains power source is available.

Low Battery Warning

When the batteries run low and the

power falls below 3.9V the sensor light

will ﬂicker to indicate the batteries are

running low and need replacing.

When the batteries are exhausted the

sensor light will not light up.

Sensor

Temperature

Control

IRBS4-BN/CP

176

122 149

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 5

Product Features

Dimensions (mm)

Electrical Connections

Regulations: The electrical installation

must be carried out in accordance with

the national electrical regulations and

installed by a qualiﬁed person.

Safety: In the interests of electrical

safety a 30 mA residual current device

(R.C.D not supplied) should be installed

in the supply circuit. This may be part of

a consumer unit or a separate unit.

Before starting work on the electrical

supply ensure the power supply is

isolated.

DO NOT allow the supply cord to

contact hot surfaces. The cord should

be safely routed and secured by cable

clips.

Connections: The power supply box

must be permanently connected to the

ﬁxed wiring of the mains supply using

the factory ﬁtted supply cord, via a

switched fused spur o the ring main.

The wires in the mains lead are coloured

in accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the

mains lead of this appliance may not

correspond with the coloured markings

identifying the terminals in your

connection unit proceed as follows;-

The wire which is coloured blue must

be connected to the terminal which is

marked with the letter ‘N’ or is coloured

black.

The wire which is coloured brown must

be connected to the terminal which is

marked with the letter ‘L’ or is coloured

red.

Fuse: This following fuse size should be

used.

Model Fuse Size

(AMPS)

IRBS4-CP 3

IRBS4-BN 3

Supply Cord Replacement

If the supply cord is damaged, it must

be replaced by a genuine Bristan supply

cord. Contact Bristan Customer Services

on 0330 026 6273 to request new spare

parts.

N L

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

Sensor

Cable

1. Fit The Spout

Fit the spout to the sink / work surface

ensuring the sensor cable is threaded

through the hole in the sink / work

surface.

Also ensure that the product is at least

360mm away from reﬂective surfaces

to prevent the tap from automatically

switching on and o.

2. Secure Spout to Sink / Work Surface

Thread the rubber washer and metal

washer onto the ﬁxing rod up to the

underside of the sink / work surface.

Secure the spout in place by screwing

the ﬁxing nut onto the ﬁxing rod.

Tighten the ﬁxing nut using a suitable

spanner.

3. Connect Sensor Cable

See ‘Electrical Connections’ installation.

4. Connect Water Supplies

See ‘Water Connections’ installation.

Sensor

Cable

Flexi Hose

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 7

Installation

Connect Power Supply Cable

Before starting any electrical

work ensure the power supply

is isolated.

Wire the electrical power cable into a

switched fused spur o the ring main.

The blue wire should be wired to the

neutral connection and the brown

wire should be connected to the live

connection.

Note: For full electrical requirements see

‘Electrical Connections’ in ‘Installation

Requirements’ section.

Important: This product must be

permanently connected to the ﬁxed

wiring of the mains supply using the

factory supplied power cable.

Power/ Sensor Cable Connection

Connect the transformer cable to the

sensor and battery box connectors.

Attach The Wall Bracket

Attach the wall bracket to the wall by

using screws and wall plugs provided.

Place the battery box into the battery

housing bracket and attach to the wall

bracket.

Setting Up The Sensor

Once the tap has been installed,

disconnect the sensor connector from

the transformer cable for 30 seconds,

Reconnect and put the hand at the

required position in front of the sensor

until the light stops ﬂashing.

Transformer cable

Sensor

connector

Battery box

connector

Battery Box

Battery Housing

Bracket

Wall Bracket

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation - Electrical Connections

Before connecting the water

supplies to the spout, ﬂush

through the pipework to

ensure removal of debris.

Turn o the mains water supply and

close any isolating valves. Screw the

ﬂexible tails into the bottom of the

spout, ensuring it is tightened fully by

hand only.

Connect the ﬂexible tails to the hot and

cold water supplies. Turn on the mains

water supply letting the water ﬂow

for a few minutes. Check all joints and

connections for any leaks.

Wall Bracket

Flexible Tails

Care must be taken when connecting the ﬂexible connection hose

from the power supply box to the spout to ensure it does not bend

sharply and kink or twist. See below for recommended ways to ﬁt

the ﬂexible tails.

Slight

bend

90 °

angle

Kinks

Curved

round Twists

Installation - Water Connections

Inserting Batteries

Your infrared spout is supplied with a

back up battery pack. In the event of a

power failure the batteries will override

the mains power supply to ensure the

spout continues to function.

1. Insert Batteries

Insert 4 x AA batteries into the battery

box ensuring they are inserted the

correct way.

Note: Only use 1.5V AA (LR6) Alkaline

batteries (preferably => 2000mAh for

good battery life).

IMPORTANT

Failure to follow

these guidelines

may result in poor

performance and

damage to the

ﬂexible tails.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 9

Installation - Electrical Connections

Using the Automatic Basin Spout

Place the users hands under the spout

within the sensing range. Once the users

hands have been detected water will ﬂow

constantly until the hands are removed.

After 30 ± 5 seconds the water will stop

ﬂowing.

If the user requires more water remove

hands from the sensing range and wait

3 seconds, then place the hands back into

the sensing range and the water will ﬂow

again.

Note: The sensing range for all models is

30-32cm from the sensor.

Temperature Control

Manual temperature control lever allows

users to set preferred temperature.

Temperature Control

Cold

Hot

Cold

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Operation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan W BATH05 C Verdrahtungsschema

Bristan

Bristan WASTES W BASIN04 BB Montageanleitung

Bristan

Bristan DSC 3HBF C Bedienungsanleitung

Bristan

Bristan GLL RAPSNK4 C Bedienungsanleitung

Bristan

Bristan AR2 SHXVOFF Verdrahtungsschema

Bristan

Bristan N2 SHCDIV C (D7) Verdrahtungsschema

Bristan

Bristan Artisan Verdrahtungsschema

Bristan

Bristan Blade Bath Shower Mixer BL BSM C Bedienungsanleitung

Bristan

Bristan Blade BL BAS C Bedienungsanleitung

Bristan

Bristan TG SNK C Verdrahtungsschema

Bristan

Bristan SMILE SM 1/2 C D6 Verdrahtungsschema

Bristan

Bristan IRN R001 Bedienungsanleitung

Bristan

Bristan ELVIRA SHWR PK Montageanleitung

Bristan

Bristan Jute JU BSM C Bedienungsanleitung

Bristan

Bristan Z2 TBV 1/2 C Verdrahtungsschema

Bristan

Bristan smile Montageanleitung

Bristan

Bristan CR SHXDIVFF C Verdrahtungsschema

Bristan

Bristan Star FH STRD01 C Bedienungsanleitung

Bristan

Bristan SOLO SST1000-L Bedienungsanleitung

Bristan

Bristan BUZ2 SHXDIVCTFF C (D4) Verdrahtungsschema

Bristan

Bristan EXD BAS C Bedienungsanleitung

Bristan

Bristan W BASIN13 C Verdrahtungsschema

Bristan

Bristan Mios MIO BSM C Verdrahtungsschema

Bristan

Bristan FIXED HEADS FHC ABRD01 C Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung