Bristan SAI 1/2 C Montageanleitung

Installation Instructions

and User Guide

Sail Tap Range

Models Covered:

SAI 1/2 C, SAI 3/4 C,

SAI BAS C, SAI BF C,

SAI BSM C

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave

them with the user.

2Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert.

All products manufactured and supplied by Bristan are safe and comply to

legislative requirements; providing that they are installed correctly and receive

regular maintenance in accordance with these instructions your user experience will

not be aected.

These ﬁtting instructions have been created to give you all of the information you

need and, if you need any further help, please do not hesitate to give us a call on

0330 026 6273.

Contents

• Important Safety Information 3

• Speciﬁcations 4

• Installation - Basin & Bath Taps 5

• Installation - Basin Mixer 6

• Installation - Bath Filler 7

• Installation - Bath Shower Mixer 8

• General Cleaning 9

• Maintenance 9-11

• Troubleshooting 11

• Please read these instructions

thoroughly and retain for future use.

• All products manufactured and

supplied by Bristan are safe provided

they are installed, used correctly

and receive regular maintenance in

accordance with these instructions.

• If you are in any doubt about your

ability to install this product safely

you must employ the services of

an experienced qualiﬁed plumber/

electrically qualiﬁed person.

• These ﬁttings need to be installed

in accordance with, and meet the

requirements of the Water Supply

(Water Fittings) Regulations 1999 and

current bylaws. For full Installation

Requirements & Notes (IRN) please

visit wras.co.uk/directory.

• Remove all packaging and check

the components for damage before

starting installation

• Before starting any

installation, please consider

the following:

• Prior to drilling into walls, check

that there are no hidden electrical

wires, cables or water supply pipes.

This can be checked with the aid of an

electronic detector.

• If power tools are used, don’t

forget to wear eye protection and

unplug equipment after use.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

• Before installing these taps the

water supply must be thoroughly

ﬂushed in order to remove any swarf,

solder etc.

• We recommend isolation valves to

be ﬁtted to the inlet water supplies to

ensure ease of future maintenance.

• Full access must be made available

for future maintenance/servicing

purposes.

• This product must not be modiﬁed

in any way as this will invalidate the

guarantee

If in doubt, contact a registered plumber

or your Local Water Authority or the

Secretary of the Institute of Plumbing,

address as follows:-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex,

RM12 6NB, Tel: 01708 472791

Important Safety Information

Pressure

BAR

6.0

8.0

10.0

4.0

2.0

1.0

5.0

4.0

3.02.0

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Light

Maximum Static Pressure:

1.0 Pa (10.0 bar)

Inlet Water Temperature

Outlet Connection

Min: 0.02 MPa

(0.2 bar)

Max: 0.5 MPa

(5.0 bar)

Working Pressures (All Models)

Inlet Connection

Tools You’ll Need

Recommended Usage

Healthcare

Flat-head Screwdriver Cross-head

Screwdriver

Pencil Drill Pipe Cutter Safety Glasses

Pipe & Wire

Detector

Heavy

Domestic

Pressure

BAR

Speciﬁcations

60°C

65°C

60-65°C Recommended Commercial

Commercial

SAI 1/2 C - 1/2” BSP

SAI 3/4 C - 3/4” BSP

SAI BAS C - 1/2” BSP Flexible Tails

SAI BF C - 3/4” BSP

SAI BSM C - 3/4” BSP

SAI 1/2 C - Coin-Slot Aerator

SAI 3/4 C - Coin-Slot Aerator

SAI BAS C - 5lpm Flow Limited Aerator

SAI BF C - Flow Straightener

SAI BSM C - G 1/2”, Single Function Handset

Flexible Connecting Pipes

Slight

bend

90 °

angle

Kinks

Curved

round Twists

Spare Parts

To replace any spare parts

for your tap, why not

scan the QR Code or

visit www.bristan.com

and search for your product.

Hexagonal Key

Adjustable

Spanner

Speciﬁcations

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation - Basin & Bath Taps

Pack Contents

1. Identify all components are present prior to

starting installation.

2. Position the ‘O’ ring in the groove on the

underside of the tap body and feed the

bodies through the tap holes on the basin/

bath.

3. Using a suitable spanner, secure the taps to

the basin/bath with the washers and metal

backnuts.

4. Connect the hot and cold water supplies to

the tap tails. We recommned ﬁtting isolation

valves for ease of future maintenance (not

supplied).

5. Turn on the water supplies and open both

taps letting the water ﬂow for a few minutes

to check all joints and connections for any

leaks.

REMEMBER

Hot on the

left, cold on

the right!

Operation

Cold

Hot

6Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Pack Contents

1. Identify all components are present prior to

starting installation.

2. From the ﬁxing kit, screw the two ﬁxing rods

into the bottom of the mixer body. Screw in

(by hand only) the ﬂexible connecting pipes

to the mixer body by hand only; (DO NOT

OVERTIGHTEN).

3. Feed the mixer body through the basin

taphole ensuring the o-ring is ﬁtted in the

groove on the underside of the tap body.

4. Push the ‘C’ shaped rubber and metal

washers onto the threaded rods and tighten

by screwing the ﬁxing nuts.

5. Connect the hot and cold

water supplies to the tap

tails. We recommned

ﬁtting isolation valves for

ease of future maintenance

(not supplied).

6. Fit the clicker waste to the basin ensuring a

rubber washer is ﬁtted between the basin

and the waste.

7. Place the other rubber washer under the

basin and secure in place by tightening the

backnut.

8. Turn on the water supplies and open both

taps letting the water ﬂow for a few minutes

to check all joints and connections for any

leaks.

REMEMBER

Hot on the

left, cold on

the right!

Operation

Cold

Hot

Push down

the plug to

ﬁll the basin.

Push again to

empty.

Installation - Basin Mixer

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Pack Contents

1. Identify all components are present prior

to starting installation.

2. Position the ‘O’ rings in the grooves on the

underside of the tap body and feed the

body through the tap holes on the bath.

3. Using a suitable spanner, secure the tap

to the bath with the washers and metal

backnuts.

4. Connect the hot and cold

water supplies to the tap tails.

We recommned ﬁtting

isolation valves for ease of

future maintenance (not supplied).

5. Turn on the water supplies and the tap

letting the water ﬂow for a few minutes

to check all joints and connections for

any leaks.

REMEMBER

Hot on the

left, cold on

the right!

Operation

Cold

Hot

Installation - Bath Filler

8Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation - Bath Shower Mixer

Pack Contents

1. Identify all components are present prior

to starting installation.

2. Position the ‘O’ rings in the grooves on the

underside of the tap body and feed the

body through the tap holes on the bath.

3. Using a suitable spanner, secure the tap

to the bath with the washers and metal

backnuts.

4. Connect the hot and cold

water supplies to the tap tails.

We recommned ﬁtting

isolation valves for ease of

future maintenance (not supplied).

5. Connect the hose and handset to

the tap body.

REMEMBER

Hot on the

left, cold on

the right!

Operation

x1 x1

6. Turn on the water supplies and the tap

letting the water ﬂow for a few minutes

to check all joints and connections for

any leaks.

7. Position where you want the wall bracket to

be installed, ensuring the hose and handset

can reach. Mark and drill the ﬁxing holes.

8. Secure the wall bracket using the

ﬁxings supplied. Put the bracket cover

back on the ﬁxing plate.

Cold

Hot

Pull up to switch to

shower mode.

Push back down to

go back to bath ﬁll.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

General Cleaning

Bristan products are made from premium materials, with hand polishing and

electroplated ﬁnishes.

Your taps or shower should be regularly cleaned with warm water, a mild pH-neutral liquid soap,

and polished with a soft cloth. Any residues from soap, toothpaste, shampoos and shower gels can

cause blemishes if not rinsed o straight after use.

Household bleaches and cleaners contain harsh chemicals and may damage the surface ﬁnish.

Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar.

Some surfaces such as nickel and pewter may be aected by the dye found in some cloths, so it

is also important to avoid hanging cloths on spouts.

Your Bristan shower head has rub clean nozzles for easy cleaning; simply rub your ﬁngers across

the rubber spray jets regularly to remove any scale or debris.

Maintenance

If your ﬁtting begins to leak, follow these steps

to clean your valves:

1. Isolate the water supplies by either turning

o the isolation valves to the tap; or turning

to water supply o at the mains stopcock.

2. Prise out the caps and undo the grub

screws to remove the handles. Unscrew the

shrouds.

3. Using a suitable spanner, remove the valves

from the tap body(ies).

4. Clean the seatings inside the tap body(ies).

Check the valves and seals for any damage,

if necessary replace the valves.

5. If the valves are ﬁne, soak in a suitable

solution to de-scale.

6. Once de-scaled, use a WRAS approved

grease on the seals and reverse the steps to

replace the valves and handles.

7. Turn on the water supplies and the tap

letting the water ﬂow for a few minutes

to check all joints and connections for

any leaks.

8. If problems persist, please contact

Customer Services on 0330 026 6273.

Cleaning the Valves

Grub

Screw

Handle

Cap

Shroud

Spline

Adaptor

O-Ring

Valve

10 Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Maintenance

If your ﬁtting begins to leak, follow these steps

to clean your cartridge:

1. Isolate the water supplies by either turning

o the isolation valves to the tap; or turning

to water supply o at the mains stopcock.

2. Undo the grub screw to remove the handle.

Unscrew the shroud.

3. Using a suitable spanner, remove the

cartridge retaining nut from the tap body.

Remove the cartridge

4. Clean the seatings inside the tap body.

Check the cartridge and seals for any

damage, if necessary replace the cartridge.

5. If the cartridge is ﬁne, soak in a suitable

solution to de-scale.

6. Once de-scaled, use a WRAS approved

grease on the seals and reverse the steps to

replace the cartridge and handle.

7. Turn on the water supplies and the tap

letting the water ﬂow for a few minutes

to check all joints and connections for

any leaks.

8. If problems persist, please contact

Customer Services on 0330 026 6273.

Cleaning the Cartridge Handle

Shroud

Collar

Cartridge

Retaining Nut

Cartridge

Grub

Screw

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan HOU SHC3DIV C Verdrahtungsschema

Bristan

Bristan SAF SHCDIV BLK (D1) Verdrahtungsschema

Bristan

Bristan Java J BID C Bedienungsanleitung

Bristan

Bristan Pivot Series Bedienungsanleitung

Bristan

Bristan GLD2 BSM C Verdrahtungsschema

Bristan

Bristan Pisa series Verdrahtungsschema

Bristan

Bristan Jute JU BSM C Bedienungsanleitung

Bristan

Bristan Prism PM SLWMBF C Bedienungsanleitung

Bristan

Bristan FHC CTRD01 C Bedienungsanleitung

Bristan

Bristan DSC 3HBAS C Montageanleitung

Bristan

Bristan SMILE SM 1/2 C D6 Verdrahtungsschema

Bristan

Bristan HOU 1HBF C Verdrahtungsschema

Bristan

Bristan W BASIN01 C Verdrahtungsschema

Bristan

Bristan Manhattan MH SNK C Bedienungsanleitung

Bristan

Bristan Quest Easyfit Verdrahtungsschema

Bristan

Bristan AR2 SHXVOFF Verdrahtungsschema

Bristan

Bristan Artisan Bedienungsanleitung

Bristan

Bristan Prism Bedienungsanleitung

Bristan

Bristan RS2 BSM C (D3) Verdrahtungsschema

Bristan

Bristan Buzz Verdrahtungsschema

Bristan

Bristan Z2 TBV 1/2 C Verdrahtungsschema

Bristan

Bristan QD SHXSMFF C D3 Verdrahtungsschema

Bristan

Bristan DUL2 SHXARFF C Verdrahtungsschema

Bristan

Bristan SOQ2 SHUAR C Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung