Bristan SOQ2 SHUAR C Montageanleitung

Installation Instructions

and User Guide

Sonique & Acute

Thermostatic Recessed

Mini Shower Valves

Models covered: SOQ2 SHCAR C &

AE SHCAR C

Please keep this booklet for future

Reference.

Installer, when you have read these

instructions please ensure you leave them

with the user.

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have

designed this product with your enjoyment in mind. To ensure that it works to its

full potential, it needs to be fitted correctly. These fitting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to give us a call on 0330 026 6273.

Important Safety Information ………………………………………………………….

General Information ………………………………………………………………………..

Product Features …………………………………………………………………………….

Specifications …………………………………………………...................................

Dimensions ………………………………………………………................................

Pack Contents ………………………………………………………………………………..

Installation Requirements ……………………………………….........................

Flow Regulators ………………………………………………………………………........

Installation ……………………………………………………………………….................

Shower Valve ……………………………………………………………………………….

Shower Outlet ……………………………………………………………………………..

Riser Rail …………………………………………………………………………………….

Operation ……………..........………………………………………………………………….

Commissioning ……………………………....………………………………………………

Maintenance …………………………….....………………………………………………….

In-Service Testing …………………………….……………………...........................

Troubleshooting ……………………………………........………………………………….

Notes ……………………………………………………………………………………………….

Guarantee ……………………………………............……………………………………….

9-12

13-14

15-20

15-16

18-20

23-24

25 -26

27-28

29-30

2Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they are installed,

used correctly and receive regular maintenance in accordance with these instructions.

•If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualified plumber.

•Do not use if the showerhead or shower hose has been damaged or is blocked.

•Do not crush or kink the shower hose, this could damage the hose and cause leaks.

•Remove all packaging and check the components for damage before starting

installation.

•Warning: Before starting any installation please consider the following: Prior to

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

•If power tools are used do not forget to: -Wear eye protection

-Unplug equipment after use

•The fitting of isolating valves is required as close as is practical to the supply inlet

feeds of the thermostatic mixing valve.

•Warning: Before installing the new shower valve it is essential that you

thoroughly flush through the pipework in order to remove any remaining swarf, solder,

etc. Failure to carry out this procedure could cause problems or damage to the

workings of the shower valve.

•This product must not be modified in any way as this will invalidate the guarantee.

Important Safety Information

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

General Information

4Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

This product has been tested to the TMV2 scheme which complies with the BS

EN 1287:1999 (LP) and BS 1111:1999 (HP) thermostatic mixing valve standards.

It also satisfies the requirements of the water supply (water fittings) regulations

1999 and current bylaws.

BS 6700 recommends the temperature of stored water should never exceed

65°C. A stored water temperature of 60°C is considered sufficient to meet all

normal requirements and will minimise the build up of lime scale in hard water

areas.

Important: Nominally equal (balanced) inlet supply pressures are

recommended for optimum performance with mixer showers.

This shower valve should be installed in compliance with the Water Regulations.

If in doubt, contact a registered plumber or your Local Water Authority or the

Secretary of The Institute of Plumbing, address as follows;-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex, RM12 6NB

Tel:01708 472791

Guide to designations

HP High Pressure

LP Low Pressure

S Shower

Product Features

1. On/Off and Temperature Control

Turn the control anti-clockwise

to turn the shower on and increase

the temperature.

Turn the control clockwise to

decrease the temperature and

to turn the shower off.

2. Concealing Plate

Conceals exposed pipework which is

shown when the valve is installed in

a wall cavity.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Sonique Shower Valve shown

Specifications

Inlet Connections: 15mm compression, with adjustable centres.

Operating Pressure Range: Min: 0.1 bar –Max: 5.0 bar –Maximum recommended

imbalance between hot and cold supply should not exceed a ratio of 5:1.

Maximum Static Pressure: 10.0 bar

Maximum Outlet Temperature: Factory pre-set to 41ºC (can be re-set to suit site

conditions).

Supply Requirements:

Minimum cold water supply temperature: 5ºC.

Maximum cold water supply temperature: 25ºC.

Maximum hot water supply temperature: 80ºC.

(a maximum hot water supply temperature of 60 –65ºC is recommended for ablutionary

purposes).

Note: The inlet hot water temperature must be at least 10ºC above the required blend

temperature (e.g. shower temperature 43ºC: minimum hot supply 53ºC.

6Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Dimensions (mm’s)

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

*Note: The riser rail wall brackets can be

positioned up or down the riser rail (max.

600mm apart) as required. This allows any

existing holes to be reused or covered by

the wall brackets. The brackets can also

be adjusted to sit in the middle of the tiles

or in the tile joints.

660

117 74

152

43-67

170

100

120

190

Sonique shower

valve shown

Note: This valve

is suitable for

wall cavity depths

between 43-67mm.

Pack Contents

1Shower Valve

2Concealing plate

3Filters x2

4Inserts x2

5Green flow regulator

6Yellow flow regulator

7Hexagonal key

8Valve fixings x2

9Riser rail fixings x4

10 Showerhead (single function)

11 Sealing washers x2

12 Shower hose

13 Wall outlet

14 Riser rail

8Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

This shower valve must be installed in

compliance with current water regulations.

If you have any doubts about the water

regulation requirements contact your local

water services provider or use the services

of a professional plumber.

This shower valve is suitable for use with

the following water supply systems.

•Gravity Fed Hot and Cold

(pressure Balanced)

•Gravity Fed Hot and Mains Cold

(differential pressure –see Specification

section on page 6.

•Instantaneous Water Heater

(combination boiler)

•Unvented System

•Pumped System

Gravity Fed Hot and Cold

Important: If you install this shower

valve with a gravity fed system, there must

be a minimum head (vertical distance)

from the underside of the cold water

storage tank to the showerhead position of

at least 1 metre.

Note: Pumped system (with Essex

flange) If you install this shower valve to a

pumped gravity fed system where the

minimum head (vertical distance) from the

underside of the cold water storage tank to

the top of the hot water cylinder is less

than 1 metre we recommend an Essex

flange is used as shown on page 10.

Flushing Pipework

Important: Before connecting the

shower valve (see Installation on pages 15-

20), supply pipework must be flushed to

clear debris before connecting the shower

valve. Debris will reduce the performance

and life of the shower.

Gravity Fed Hot and Mains Cold

Cold mains supply Cold mains supply

1m min

min

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

Instantaneous Water Heater Unvented System

Pumped System Pumped System (with Essex flange)

Key: Isolating Reducing Shower Pump Essex

Valve Valve Valve Flange

Cold mains supply Cold mains supply

1m min 1m min

If less

than 1m

see note.

50mm

10 Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan K 1/2 C Verdrahtungsschema

Bristan

Bristan AR2 SHXVOFF Montageanleitung

Bristan

Bristan K SNKSL EF C Bedienungsanleitung

Bristan

Bristan Opac Series Montageanleitung

Bristan

Bristan W SNK6 C Bedienungsanleitung

Bristan

Bristan ELVIRA SHWR PK Montageanleitung

Bristan

Bristan Hourglass HOU BSM C Verdrahtungsschema

Bristan

Bristan PISA PS2-BSM-C Bedienungsanleitung

Bristan

Bristan PIV BAS C Bedienungsanleitung

Bristan

Bristan W BTH PU1 C/G Bedienungsanleitung

Bristan

Bristan FIXED HEADS FHC ABRD01 C Bedienungsanleitung

Bristan

Bristan Pear Verdrahtungsschema

Bristan

Bristan WASTES W BASIN04 BB Montageanleitung

Bristan

Bristan Manhattan MH SNK C Bedienungsanleitung

Bristan

Bristan W BASIN15 C Bedienungsanleitung

Bristan

Bristan 1901 Bedienungsanleitung

Bristan

Bristan Star FH STRD01 C Bedienungsanleitung

Bristan

Bristan Joy ThermoSafe Series Montageanleitung

Bristan

Bristan Regency Luxury R BSM C Verdrahtungsschema

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Bristan

Bristan SOLO SST1000-L Bedienungsanleitung

Bristan

Bristan Descent Series Bedienungsanleitung

Bristan

Bristan DUL2 SHXARFF C Verdrahtungsschema

Bristan

Bristan Jute JU BSM C Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung