Canon RF-S 18-150mm F3.5-6.3 IS STM Bedienungsanleitung

ENG

Instructions

ENG-1

Thank you for purchasing a Canon product.

Canon RF-S18-150mm F3.5-6.3 IS STM is a

high magnification zoom lens for use with EOS

R series cameras* compatible with RF-S lenses.

* Images that have been cropped from the center

of the image screen will be taken when mounted

on EOS R series cameras with full-size sensors.

(Equivalent to the APS-C size)

Please refer to the camera’s instructions for details.

z“IS” stands for Image Stabilizer.

z“STM” stands for Stepping Motor.

Conventions used in these instructions

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Camera Firmware and Camera

Applications

Please use the latest versions of firmware and

applications with the camera in use. For details on

whether the firmware and applications in use are the

latest version or not, and for details on updating them,

please check the Canon website.

ENG-2

Precautions to ensure that the camera is used

safely. Read these precautions thoroughly. Make

sure all details are observed in order to prevent

risks and injury to the user and other people.

Warning

Details pertaining to risks that may

result in death or serious injury.

zDo not look directly at the sun or other strong

light sources through a lens. This may result in

loss of sight.

zDo not leave a lens in the sun without the lens

cap attached. The lens may concentrate entering

sunlight and cause a malfunction or fire.

Caution

Details pertaining to risks that may

result in injury or damage to other

objects.

zDo not leave the product in places exposed to

extremely high or low temperatures. The product

may cause burns or injury when touched.

zDo not insert your hand or fingers into the

product. This may result in injury.

Safety Precautions

ENG-3

Handling Precautions

zDo not leave the product in excessive heat such as

in a car in direct sunlight. High temperatures can

cause the product to malfunction.

zIf the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight

plastic bag before taking it from a cold to warm

environment. Then take out the lens after it has

warmed gradually. Do the same when taking the

lens from a warm environment into a cold one.

zIn order to optimize aperture control, there are

occasions in which the aperture blades will move

during zooming and focusing, even when the

aperture value is set for aperture-priority AE or

manual exposure, etc.

zPlease also read any lens related handling

precautions listed in your camera’s instruction

manual.

General Precautions

Shooting Precautions

zFocus again after recovering from the auto power

off status.

zTo maintain the focus position in the shooting-ready

status, set [Auto power off] to [Disable] on the

camera.

ENG-4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such

changes or modifications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAN ICES-3 (B) / NMB-3 (B)

ENG-5

Focusing/control ring (→ 7)

Hood mount (→ 14)

Filter mounting

thread (→ 15)

Zoom ring (→ 12)

Lens mount index (→ 6)

Zoom position index (→ 12)

Contacts (→ 6)

Lens mount (→ 6)

z For detailed information, reference page numbers are provided in parentheses (→ **).

Nomenclature

ENG-6

Lens mount index

Lens release button Dust cap

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera’s instructions for

details.

zSet the camera’s power switch to OFF when

attaching or detaching the lens.

zAttach the lens cap before detaching the lens

from the camera.

zAfter detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

zContacts that are scratched, soiled, or have

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

1. Attaching and Detaching the Lens

ENG-7

2. Focusing/control ring

The focusing/control ring can be used as either a

focusing ring or a control ring.

Focusing/control ring

Switching between the focusing ring and control

ring is performed on the camera.

This can only be used as a focusing ring on

cameras that do not support switching*.

Please refer to the camera’s instructions for

details.

* EOS R, RP, Ra, R5, R6

Use as a Focusing Ring

Set the focus mode (AF/MF) on the camera.

To shoot in autofocus (AF) mode, set the

camera’s focus mode to AF.

To use only manual focusing (MF), set the

camera’s focus mode to MF, and focus by turning

the focusing ring (focusing/control ring).

zWhen the AF does not operate after switching the

focus mode from [MF] to [AF] and when the focus

mode is not displayed on the camera’s menu, turn

the focus ring in the direction of [Infinity] until the

focusing position is within the [AF in-focus range].

• It is not possible to switch the focus mode to [AF]

if the focus lens’s focusing position is within the

[MF-only range], at which the focus can only be

aligned in the MF mode.

• Refer to 3. Taking Closeup Shots in the Manual

Focusing (MF) Mode for further details.

ENG-8

Use as a Control Ring

Set the control ring function using the camera’s

menu. The control ring can be assigned the

functions that are commonly used with cameras,

such as shutter speed and aperture settings.

Please refer to the camera’s instructions for

details on how to use the control ring.

zThe lens does not have a focus mode switch or

a focusing/control selector switch.

zDelayed focus may occur if the focusing ring

(focusing/control ring) is quickly turned.

zThe lens’ focusing ring (focusing/control ring) is

electronic.

zWith a camera capable of electronic full-time

manual focus, manual focusing is possible

in both One-Shot AF and Servo AF modes.

However, this requires a change in camera

settings.

zWhen AF operation is set to One-Shot AF,

manual focus is possible after autofocusing

has been completed by continuing to press the

shutter button halfway (electronic manual focus

function). However, this requires a change in

camera settings.

Please refer to the camera’s instructions for

details.

Focusing/control ring

ENG-9

When using this lens, shots taken with the

camera’s manual focusing (MF) mode within a

range of less than 50 mm from the wide end

make the subject seem closer and larger than

with the autofocus (AF) mode.

The focusing distance ranges of the wide end

are shown below.

• AF in-focus range: 0.17 m/0.56 ft. to ∞

• MF in-focus range: 0.12 m/0.39 ft. to ∞

Focusing within a range of 0.12 m/0.39 ft. to less

than 0.17 m/0.56 ft. is possible only when using

the MF mode. (MF-only range)

zThe [AF in-focus range] and [MF in-focus range]

will differ in accordance with the focal length.

zRefer to the specifications on page 16 for details

on the range of focusing distances apart from

with wide-angle lenses.

zThe focusing distance represents the distance

between the [ ] mark (focal plane mark) on the

camera and the subject.

Taking Closeup Shots in the Manual Focusing (MF) Mode

Wide-end Examples:

Focal plane

Subject

0.17 m/0.56 ft.

0.12 m/

0.39 ft.

Andere Handbücher für RF-S 18-150mm F3.5-6.3 IS STM

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon RF 24-105mm F4-7.1 IS STM Bedienungsanleitung

Canon

Canon YJ13 x 6B KRS Bedienungsanleitung

Canon

Canon EF 20mm 1:2.8 USM Bedienungsanleitung

Canon

Canon EF-S18-55mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF 50mm 1:1.0L Bedienungsanleitung

Canon

Canon MP-E 65mm f/2.8 1-5x Macro Photo Bedienungsanleitung

Canon

Canon 4573C002 Bedienungsanleitung

Canon

Canon EF 400mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 35~350 mm f/3,5-5,6 L Bedienungsanleitung

Canon

Canon EF 24mm f/2.8 IS USM Bedienungsanleitung

Canon

Canon EF100mm 1:2.0 Bedienungsanleitung

Canon

Canon EF 17-35mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon EF100-400mm f/4.5-5.6L IS II USM Bedienungsanleitung

Canon

Canon EF24-70mm f/2.8L USM Bedienungsanleitung

Canon

Canon EF50mm f/1.0L USM Bedienungsanleitung

Canon

Canon EF 400mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 70-200mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon EF80 Bedienungsanleitung

Canon

Canon CN7x17 KAS S/E1 Bedienungsanleitung

Canon

Canon EF-M15-45mm F3.5-6.3 IS STM Bedienungsanleitung

Canon

Canon digi super 86 XS Bedienungsanleitung

Canon

Canon EF Lenses Bedienungsanleitung

Canon

Canon EF-S35MM F/2.8 MACRO IS STM Bedienungsanleitung

Canon

Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung