CB2 Swig Bedienungsanleitung

1 - drawer

front

1 - small

door

Made in Vietnam - r03 Page 1 of 7

swig MINI BAR

hardware

components

Thank you for purchasing the Swig Mini Bar. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

tools required

phillips head screwdriver

1 - right side

panel

24 - wood

dowels

16 - cam

screws

Missing hardware? Please call

800.606.6387 for replacements.

16 - cams24 - small

screws

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1 - left side

panel

1 - partition

1 - top

panel

2 - wine rack

shelves ( 1 front, 1 back)

2 - fixed

shelves (1 left, 1 right)

1- back

panel

1 - large

door

1 - drawer

bottom

8 - large

screws

6 - flat

washers

6 - spring

washers

1 - pull

4 - hinges

2 - drawer

sides (1 left, 1 right)

1 - crossbar

6 - bolts

(We recommend the use of hand tools instead of power tools)

1 - bottom

panel

2 - pull

screws

1 - drawer

back

6 - cam

covers

swig MINI BAR

Made in Vietnam - r03 Page 2 of 7

A) Insert 4 cams into left and right fixed shelves

as shown.

B) Insert 2 cams and 4 wood dowels into

crossbar as shown.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

3 4

Insert 8 wood dowels, 5 cam screws and 2

cams into partition as shown. Secure, but do not

over tighten, cam screws with a phillips head

screwdriver. Make sure arrows on each cam

points toward nearest edge with holes.

Insert 6 cam screws into top panel as shown.

NOTE: Make sure

arrows on each

cam points toward

nearest edge with

holes

NOTE: Do not

over tighten the

cam screws

left and right

fixed shelves

crossbar

partition

top

panel

A) Insert 6 wood dowel, 2 cam screws and 2

cams into left side panel as shown.

B) Insert 6 wood dowels, 3 cam screws and 2

cams into right side panel as shown.

left side

panel

right side

panel

swig MINI BAR

Made in Vietnam - r03 Page 3 of 7

Fit dowels of partition and left/right side panels

into corresponding holes of bottom panel as

shown. Secure bottom panel with 6 bolts, 6

spring washers and 6 flat washers as shown,

using an phillips head screwdriver.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

7 8

With the assistance of another adult, carefully

position unit upright. Slide back panel into

grooves of assembled unit as shown.

bottom

panel

bolt

flat washer back

panel

right side

panel

A) Fit dowels of assembly into corresponding holes

of right fixed shelf as shown. Secure cams.

B) Fit dowels of crossbar into corresponding holes

of assembly as shown. Secure cams.

C) Fit dowels of right side panel into

corresponding holes of right fixed shelf. Secure

cams.

D) Fit dowels of crossbar into corresponding

holes of right side panel. Secure cams.

Fit dowels of left side panel and partition into

corresponding holes of left fixed shelf as shown.

Using a screwdriver, turn each cam clockwise until

it securely engages each cam screw.

partition

left side

panel

left fixed

shelf

right fixed

shelf

crossbar

NOTE: Make sure plastic

piece on crossbar faces up

and bends towards the back

of assembly as shown

NOTE: Do not over

tighten the bolts

NOTE: Make sure grooves

of left side panel and

partition are assembled

on the same side

NOTE: Make sure cams

are positioned towards

the bottom of assembly

as shown

swig MINI BAR

Made in Vietnam - r03 Page 4 of 7

Fit groove of front wine rack shelf into

corresponding groove of back wine rack shelf as

shown.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

11 12

Fit back wine rack shelf into assembled unit as

shown.

A) Attach 2 hinges to small/large door fronts with

2small screws per hinge as shown. Secure, but

do not over tighten, screws with a phillips head

screwdriver.

B) Attach pull to small door front with 2 pull

screws as shown, using a screwdriver.

large door

front

small door

front

NOTE: Do not over

tighten the screws

pull

A) Fit dowels of assembled unit into corresponding

holes of top panel as shown. Secure all cams.

B) At this point, cover all exposed cams with cam

covers.

top

panel

back wine

rack shelf

front wine

rack shelf

cam cover

swig MINI BAR

Made in Vietnam - r03 Page 5 of 7

Slide drawer bottom into groove of drawer

assembly as shown.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

15 16

Fit dowels of drawer back into corresponding

holes of drawer assembly, and secure with 2 large

screws, using a screwdriver.

drawer

back

drawer

bottom

Fit dowels of inner drawer front into

corresponding holes of left drawer side, and

secure with 2 large screws, using a screwdriver.

drawer

front

left drawer

side

Refer to Hinge Adjustment

diagram for adjusting the

alignment of the door hinges.

Attach hinges of each door front to left and right

side panels as shown. Secure each hinge with 4

small screws, using a screwdriver.

door

front

swig MINI BAR

Made in Vietnam - r03 Page 6 of 7

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1817

cleaning and care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

unit is finished with a protective clear lacquer. It is

recommended to use coasters to protect surface from heat

and water.

Insert drawer assembly into assembled unit as

shown. Push drawer back until you hear a click.

Assembly is now complete.

Fit dowels of drawer assembly into

corresponding holes of right drawer side and

secure with 4 large screws.

right drawer

side

swig MINI BAR

Made in Vietnam - r03 Page 7 of 7

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

hinge adjustment

If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.

Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise

Height adjustment:

Loosen screw C, adjust door

height and re-tighten screw C

123

Side to side adjustment:

Loosen screw A, adjust gap with

screw Band re-tighten screw A

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung