CB2 Dwight 5-Shelf Bookcase Bedienungsanleitung

Made in Taiwan - r06 Page 1 of 3

dwight 5-SHELF BOOKCASE

assembly hardware

wall mounting hardware

components

tools required

Thank you for purchasing the Dwight 5-Shelf

Bookcase.This page

lists all the contents included in the

box. Please take the time

to identify the hardware as well

as the individual components

to this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

Missing hardware?

Please call 800.606.6387 for replacements.

(We recommend the use of hand tools instead of power tools)

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

phillips head screwdriver

allen wrench (included)

20 - glass

bumpers

4 - levelers24 - bolts

2 - side frames

(1 left, 1 right)

1 - crossbrace

4 - crossbars5 - glass shelves

(shown in order of

smallest to largest)

2 - large

screws

2 - plastic

anchors

2 - wall

straps

4 - wall

brackets

1 - top frame

dwight 5-SHELF BOOKCASE

Made in Taiwan - r06 Page 2 of 3

A. Place left side frame on a clean, padded

surface. Attach top frame to left side frame with

2 bolts as shown, using an allen wrench. Do not

fully tighten the bolts until further instructions.

B. Fit 4 crossbars onto corresponding brackets

of left side frame. Secure each crossbar with 2

bolts as shown. Do not fully tighten the bolts.

A. Fit 6 crossbars onto corresponding brackets

of right side frame Attach each crossbar with 2

bolts as shown. Do not fully tighten the bolts.

B. Insert 2 levelers to bottom of each side frame

as shown. Turn levelers clockwise to secure.

A. With assistance of another adult, carefully

position bookcase upright. Attach cross brace

to back of bookcase with 4 bolts as shown.

B. At this point, secure all bolts with an allen

wrench. Do not over tighten the bolts.

A. Adhere 4 glass bumpers per shelf as shown.

B. Carefully place glass shelf (labeled TOP)

onto top of bookcase and smallest to largest

glass shelves onto remaining shelves as shown.

Adjust levelers as necessary.

Assembly is now complete.

left side frame

crossbar

NOTE: Make sure pilot

holes in crossbars are

positioned towards the

bottom during assembly

left side frame

right side frame

NOTE: Make sure pilot holes in side

frames are positioned towards the

back during assembly

BACK VIEW OF

ASSEMBLY

cross brace

glass bumper

largest

glass shelf

TOP glass shelf

smallest

glass shelf

NOTE:

Do not

fully tighten

bolts

NOTE: Do

not fully

tighten bolts

NOTE: Do not

over tighten bolts

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

NOTE: Make sure each

shelf is securely supported

by each glass bumper

top

frame

A. Attach top frame to right side frame with 2

bolts as shown. Do not fully tighten the bolts.

B. Fit 4 crossbars onto corresponding brackets

of right side frame. Secure each crossbar with 2

bolts as shown. Do not fully tighten the bolts.

C. Insert 2 levelers to bottom of each side frame

as shown. Turn levelers clockwise to secure.

wall mounting assembly

WALL

cleaning and care

weight limitations

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.

1st (labeled TOP) shelf: 20lbs max; 2nd (smallest) shelf: 19lbs max; 3rd shelf:

22lbs max; 4th shelf: 26lbs; 5th (largest) shelf: 29lb max

dwight 5-SHELF BOOKCASE

Made in Taiwan - r06 Page 3 of 3

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

These instructions are for drywall mounting only. For safe

installation it is essential to use hardware appropriate for your wall

type. Mount to wood wall studs whenever possible. If you are

unsure of what type of fasteners to use, consult your local hard-

ware store or a qualified professional. This product is only deter-

rent, it is not a substitute for proper adult supervision.

A. With an allen wrench, remove top 2 bolts from crossbrace

as shown. At this point, re-attach crossbrace and 2 wall brack-

ets with 2 bolts.

B. With the assistance of another adult, place the unit in desired

location against the wall. Mark the location of the hole in the

bracket on the wall. Move the unit out of the workspace.

C. Drill holes slightly smaller in diameter than the drywall

anchors. Insert 1 plastic anchor into each hole until they are

flush to the wall.

D. Insert 1 screw through each wall bracket and into the

plastic anchor. Secure, but do not over tighten with a phillips

head screwdriver.

E. Place the bookcase back into position against the wall and

thread the wall strap through both brackets and pull until tight.

Wall mounting is now complete.

Inhaltsverzeichnis

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung