Cisco Linksys Wireless-B Bedienungsanleitung

A Division of Cisco Systems, Inc.

Model No.

Wireless Quick Installation Guide

Wireless

Quick Installation Guide

Model No.

WMP11 (UK/EU)

PCI Adapter

Wireless-B

Package Contents

• Wireless-B PCI Adapter

• Detachable Antenna

• Setup Wizard CD-ROM with Multi-language

Quick Installation Guide and User Guide

(English only)

• Quick Installation (English only)

GHz

802.11b

AInsert the Setup Wizard CD-

ROM into your CD-ROM drive.

The Setup Wizard should run

automatically, and the Wel-

come screen should appear. If

it does not, click the Start but-

ton and choose Run. In the

field that appears, enter

D:\setup.exe (where “D” is the

letter of your CD-ROM drive.

NOTE: Click the User Guide

button to open the PDF

file of the User Guide.

BTo install the Adapter, click the

Install button on the Welcome

screen.

CAfter reading the License

Agreement, click the Next but-

ton if you agree, or click the

Cancel button to end the

installation.

DThe Setup Wizard will ask you to

choose a wireless mode. Click

the Infrastructure Mode radio

button if you want your wireless

computers to network with

computers on your wired net-

work using a wireless access

Software Installation and Configuration

for Windows 98, Me, and 2000

IMPORTANT FOR WINDOWS XP USERS: Do NOT run the Wireless-B PCI Adapter

Setup Wizard. Proceed to Step 2.

IMPORTANT FOR WINDOWS 98, ME, AND 2000 USERS: If you are using Windows 98,

Me, or 2000, you must run the Setup Wizard to install the software before install-

ing the hardware.

point. Click the Ad-Hoc Mode

radio button if you want multi-

ple wireless computers to net-

work directly with each other.

Do not use the Ad-Hoc mode if

you want your wireless comput-

ers to communicate with com-

puters on your wired network.

In the SSID field, enter the SSID

of your wireless network. The

SSID must be identical for all

devices in the network. The

default setting is linksys (all low-

ercase). Click the Next button.

EIf you chose Infrastructure

Mode, go to step F now.

If you chose Ad-Hoc Mode,

select the correct operating

channel for your network. The

channel you choose should

match the channel set on the

other devices in your wireless

network. Click the Next button,

and go to step F.

FThe Setup Wizard will ask you to

review your settings before it

starts to copy files. Click the Yes

button to save these settings,

or click the No button to

change any settings.

GAfter the files have been suc-

cessfully copied, the following

screen will appear. Click the

Exit button.

Proceed to Step 2.

IMPORTANT FOR WINDOWS 98, ME, AND 2000 USERS: If you are using, Windows 98,

Me, or 2000, you must run the Setup Wizard to install the software before installing

the hardware.

ARemove any CDs or disks from

their drives, and turn off your

desktop PC.

BOpen your PC’s case, and

locate an available PCI slot on

the motherboard. Check with

your computer manufacturer

for instructions.

CSlide the Adapter into the PCI

slot. Make sure that all of its pins

are touching the slot’s con-

tacts. You may have to apply a

bit of pressure to slide the

Adapter all the way in.

DAfter the Adapter is set firmly in

place, secure its fastening tab

to your PC’s chassis with a

mounting screw. Then close

your PC’s case.

EAttach the external antenna to

the Adapter’s antenna port.

FPower on your desktop PC.

If your PC is running Windows 98,

Me, or 2000, proceed to step G.

If your PC is running Windows XP,

proceed to step 3.

Installing the Wireless-B PCI Adapter into

Your Desktop PC

IMPORTANT FOR WINDOWS XP USERS: You must install the Adapter’s hardware

before installing the software.

IMPORTANT: Make sure the

antenna is positioned straight up

into the air, at a 90° angle from

the Adapter. This will ensure opti-

mum wireless operating range

and performance.

GAfter the Adapter has been

physically connected to your

computer, Windows will detect

the new hardware.

Windows will begin installing

the driver files in your operating

system. If Windows asks you for

the original Windows CD-ROM,

insert the CD-ROM, and direct

Windows to the proper location

for the CD-ROM (e.g., D:\).

Congratulations! The installation of

the Wireless-B PCI Adapter

is complete.

If you require additional informa-

tion, please consult the User Guide

(English only) or visit the Linksys

website.

AWindows XP will automatically

detect the Adapter. Insert the

Setup Wizard CD-ROM into your

CD-ROM drive. Click the radio

button next to Install the soft-

ware automatically (Recom-

mended). Then click the Next

button.

BAfter Windows has finished

installing the driver, click the

Finish button.

CAfter installing the Adapter, the

Windows XP Wireless Zero Con-

figuration icon will appear in

your computer’s system tray.

Double-click the icon.

3Driver Installation and Configuration for

Windows XP

IMPORTANT FOR WINDOWS XP USERS: Do NOT run the Wireless-B PCI Adapter

Setup Wizard. If the Setup Wizard runs automatically after the Setup Wizard CD-

ROM has been inserted, click the Exit tab.

IMPORTANT FOR WINDOWS XP USERS:

WindowsXPhasabuilt-inconfiguration

tool.UsetheWindowsXP Wireless Zero

Configuration (in the system tray at the

bottom of your screen) to configure the

Adapter.

DThe screen that appears will

show any available wireless

network. Select a network, and

then click the Connect button.

EIf your access point has WEP

encryption enabled, the

screen in Figure E will appear.

Enter the WEP key of your wire-

less network in the Network key

field. Click the Connect but-

ton.

To find the WEP encryption key

settings of the other wireless

devices in your network, such

as the WAP11 Wireless Access

Point, you may use any

device’s web-based utility to

check the WEP encryption

screen for the correct key

entries. If you are using other

manufacturers’ access points,

refer to their documentation for

more information about WEP

encryption.

NOTE: Windows XP does not support

the use of a passphrase. Enter the

exact WEP key used by your access

point.

FThe screen in Figure F will

appear if your connection is

active.

For more information about WEP,

refer to your access point’s user

guide, or visit www.linksys.com.

For more information about wireless

networking on a Windows XP com-

puter, click Start and then Help and

Support. Enter the keyword wireless

in the field provided, and press the

Enter key.

Congratulations! The installation of

Wireless-B PCI Adapter is complete.

If you require additional informa-

tion, please consult the User Guide

(English only) or visit the

Linksys website.

WMP11-UK-EU_V4-QIG-40225NC JL

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

A Division of Cisco Systems, Inc.

Model No.

Wireless Quick Installation Guide

Trådløs

Installationsvejledning

Modelnr.

WMP11 (DK)

PCI-adapter

Trådløs-B

Pakkens indhold

• Trådløs-B PCI-adapter

• Ekstern antenne

• Cd-rom med guidet konfiguration og

brugervejledning (kun på engelsk)

• Installationsvejledning (kun på engelsk)

GHz

802.11b

APlacer cd-rom’en med guidet

konfiguration i cd-rom-drevet.

Den guidede konfiguration

køres automatisk, og figur 5-

1vises. Hvis det ikke er tilfældet,

skal du klikke på knappen Start

og vælge Run (Kør). Indtast

D:\setup.exe (hvor “D” er

bogstavet for cd-rom-drevet) i

det felt, der vises.

BInstaller adapteren ved at

klikke på knappen Install i

skærmbilledet Welcome.

CKlik på knappen Next, når du

har læst License Agreement.

DDet guidede konfiguration

giver dig mulighed for at

vælge en trådløs tilstand. Klik

på alternativknappen Infra-

structure Mode, hvis dine

trådløse computere, skal

oprette netværksforbindelse til

computere i det kabelbaser-

ede netværk ved hjælp af et

trådløst access point. Klik på

alternativknappen Ad-Hoc

Mode, hvis flere trådløse com-

putere skal oprette netværks-

forbindelse direkte til hinanden.

Brug ikke tilstanden Ad-Hoc,

hvis de trådløse computere

skal kommunikere med com-

putere på det kabelbaserede

netværk.

Driverinstallation og konfiguration i

Windows 98SE, Me og 2000

VIGTIGE OPLYSNINGER TIL WINDOWS XP-BRUGERE: Fortsæt til trin 2.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Cisco PCI-Karte Handbücher

Cisco

Cisco Linksys LNE100TX Bedienungsanleitung

Cisco

Cisco WMP54GS Bedienungsanleitung

Cisco

Cisco AIR-PI21AG-A-K9 Bedienungsanleitung

Cisco

Cisco Linksys WRV54GP2M Bedienungsanleitung

Cisco

Cisco WMP110 RangePlus Original Betriebsanleitung

Cisco

Cisco WMP200 RangeBooster Bedienungsanleitung

Cisco

Cisco Linksys WMP110 Bedienungsanleitung

Cisco

Cisco Linksys WMP54Gv4 Bedienungsanleitung

Cisco

Cisco WMP110 RangePlus Bedienungsanleitung

Cisco

Cisco WMP54G Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung