Cisco WMP110 RangePlus Original Betriebsanleitung

Model No: WMP110

RangePlus Wireless

PCI Adapter

QUICK INSTALLATION

Package Contents

RangePlus Wireless PCI Adapter

Setup Wizard CD-ROM

User Guide on CD-ROM

Quick Installation Guide

Two (2) Antennas

•

The Adapter is installed and set up using the Setup Wizard on the enclosed

Setup Wizard CD.

IMPORTANT: Do not install the Adapter in your computer

until you are instructed to do so, or the Adapter will not install

correctly.

Insert the Setup Wizard CD into

your CD-ROM drive.

NOTE: Windows or other personal ﬁrewalls may ask for

permission to run the software or program. You will need to allow

the software to run in order to continue.

The Welcome screen appears.

Click the Click Here to Start

button.

Insert the CD-ROMInsert the CD-ROM

Click Here to StartClick Here to Start

Installation1�

Installation

Read the License Agreement, and

select I accept the terms in the

License Agreement.

Click Next to continue the

installation.

Before connecting the PCI Adapter

to your PC, make sure that your

desktop PC is powered down.

Open your PC case and locate

an available PCI slot on the

motherboard. Check with your

computer manufacturer for

instructions.

License AgreementLicense Agreement

Power Down the Desktop PCPower Down the Desktop PC

Installation

Slide the PCI Adapter into the PCI

slot. Make sure that all of its pins

are touching the slot's contacts. You

may have to apply a bit of pressure

to slide the adapter all the way in.

After the adapter is ﬁrmly in place,

secure its fastening tab to your PC's

chassis with a mounting screw.

Then, close your PC

Attach the two (2) external

antennas to the adapter’s antenna

ports.

Power on your desktop PC.

Congratulations! Installation is complete.

If your computer runs Windows XP or 2000, proceed to“Section 2: Setup

for Windows XP or 2000”.

If your computer runs Windows Vista, proceed to“Section 3: Setup for

Windows Vista”.

Insert the AdapterInsert the Adapter

Attach the AntennasAttach the Antennas

Installation

Setup for Windows XP or 20002�

The Adapter supports, Wi-Fi Protected Setup, a feature that makes it easy to set

up your wireless network.

If the Available Wireless Networks screen

appears, your router does not support

this feature. Proceed to the“No Wi-Fi

Protected Setup” section.

If the Connect to a Network screen

appears, the Adapter detects a router

that supports Wi-Fi Protected Setup.

Proceed to the “Wi-Fi Protected Setup”

section.

No Wi-Fi Protected Setup

From the Available Wireless Networks screen, you can launch one of the two

setup methods.

If your network appears on the Available Wireless Networks screen, proceed

to step A. If your network does not appear on the Available Wireless Networks

screen, click Advanced Setup and follow the on-screen prompts.

Available Wireless NetworksAvailable Wireless Networks

Connect to a NetworkConnect to a Network

Setup for Windows XP or 2000

On the Available Wireless Networks

screen, the available networks

are listed in the table. Select your

network, and then click Connect.

If your network does not use wireless security, proceed to the“Wireless

Security Disabled”section. If your network uses wireless security, proceed

to the Wireless Security Enabled” section.

Wireless Security Disabled

Click Connect Anyway.

Click Finish.

Available Wireless NetworksAvailable Wireless Networks

Click Connect AnywayClick Connect Anyway

CongratulationsCongratulations

Setup for Windows XP or 2000

The Status screen of the Wireless

Network Monitor appears the first

time you run the Setup Wizard. To

exit the Monitor, click the Xin the

upper right corner.

NOTE: After the Adapter is installed, the Wireless Network

Monitor screen opens, and its icon appears in your computer’s

system tray. You can double-click the icon to open the Monitor

if you want to find available wireless networks or change the

Adapter’s configuration. For detailed information on the Monitor,

refer to the User Guide on the CD-ROM.

Congratulations! Setup is complete.

Wireless Security Enabled

If your network has wireless security, you will see one of these wireless

security screens. Follow the instructions for the screen you see.

WPA2-Personal Key Needed for Connection

Enter the Passphrase (also called

a pre-shared key) of your wireless

network. It must have 8-63

characters.

Click Connect and go to step B.

Connected to the NetworkConnected to the Network

WPA2-Personal Key Needed for ConnectionWPA2-Personal Key Needed for Connection

Setup for Windows XP or 2000

WPA-Personal Key Needed for Connection

Enter the Passphrase (also called

a pre-shared key) of your wireless

network. It must have 8-63

characters.

Click Connect and go to step B.

WEP Key or Passphrase Needed for Connection

Enter the Passphrase or WEP Key.

Passphrase The Passphrase is

case-sensitive and must have 16 or

fewer alphanumeric characters.

WEP Key For 64-bit encryption,

enter 10 hexadecimal characters

(“0” to “9” and “A” to “F”). For 128-bit

encryption, enter 26 hexadecimal

characters.

Click Connect and go to step B.

On the Congratulations screen, click

Finish.

WPA-Personal Key Needed for ConnectionWPA-Personal Key Needed for Connection

WEP Key or Passphrase Needed for

Connection

WEP Key or Passphrase Needed for

Connection

CongratulationsCongratulations

Andere Handbücher für WMP110 RangePlus

Inhaltsverzeichnis

Andere Cisco PCI-Karte Handbücher

Cisco

Cisco WMP54G Bedienungsanleitung

Cisco

Cisco WMP110 RangePlus Bedienungsanleitung

Cisco

Cisco AIR-PI21AG-A-K9 Bedienungsanleitung

Cisco

Cisco Linksys WMP54Gv4 Bedienungsanleitung

Cisco

Cisco Linksys WRV54GP2M Bedienungsanleitung

Cisco

Cisco WMP54GS Bedienungsanleitung

Cisco

Cisco Linksys LNE100TX Bedienungsanleitung

Cisco

Cisco Linksys Wireless-B Bedienungsanleitung

Cisco

Cisco WMP200 RangeBooster Bedienungsanleitung

Cisco

Cisco Linksys WMP110 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung