Cisco CSACS-1121-K9 Bedienungsanleitung

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

CLI Reference Guide for the

Cisco Secure Access Control System 5.1

Text Part Number: OL-18996-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at

www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1005R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the

document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

CLI Reference Guide for the Cisco Secure Access Control System 5.1

iii

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

CONTENTS

Preface ix

Who Should Read This Guide ix

How to Use This Guide ix

How This Guide Is Organized x

Document Conventions x

Documentation Updates xi

Related Documentation xi

Obtaining Documentation and Submitting a Service Request xii

CHAPTER

1Overview of the ACS Command Line Interface 1-1

Accessing the ACS Command Environment 1-1

User Accounts and Modes in ACS 1-1

Types of Command Modes in ACS 1-5

EXEC Commands 1-5

EXEC or System-Level Commands 1-5

Show Commands 1-7

ACS Configuration Commands 1-8

Configuration Commands 1-10

CLI Audit 1-11

CHAPTER

2Using the ACS Command Line Interface 2-1

Before Accessing the ACS CLI 2-1

Starting the CSACS-1121 2-2

Running Setup to Configure ACS 2-2

Accessing the ACS CLI 2-3

Supported Hardware and Software Platforms 2-4

Opening the CLI with Secure Shell 2-5

Opening the CLI Using a Local PC 2-5

Understanding Command Modes 2-6

EXEC Mode 2-6

ACS Configuration Mode 2-7

Configuration Mode 2-8

Configuration Submodes 2-8

Contents

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

Navigating the CLI Commands 2-10

Getting Help 2-10

Using the No and Default Forms of Commands 2-11

Command-Line Conventions 2-11

Command-Line Editing Key Conventions 2-11

Command-Line Completion 2-12

Continuing Output at the --More-- Prompt 2-13

Where to Go Next 2-13

APPENDIX

AACS Command Reference A-1

EXEC Commands A-4

acs (instance) A-4

acs (process) A-6

acs backup A-7

acs-config A-9

acs config-web-interface A-13

acs delete core A-13

acs delete log A-14

acs patch A-15

acs reset-config A-16

acs reset-password A-17

acs restore A-18

acs support A-20

application install A-23

application remove A-24

application reset-config A-25

application start A-26

application stop A-26

application upgrade A-27

backup A-28

backup-logs A-30

clock A-31

configure A-32

copy A-32

debug A-36

delete A-38

dir A-39

exit A-41

forceout A-41

Contents

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

halt A-42

help A-43

mkdir A-43

nslookup A-44

ping A-45

reload A-46

restore A-47

rmdir A-48

show A-49

ssh A-51

tech A-52

telnet A-52

terminal length A-53

terminal session-timeout A-54

terminal session-welcome A-54

terminal terminal-type A-55

traceroute A-55

undebug A-56

write A-58

Show Commands A-59

show acs-config-web-interface A-60

show acs-cores A-60

show acs-logs A-61

show application A-64

show backup history A-67

show cdp A-68

show clock A-69

show cpu A-69

show disks A-71

show icmp-status A-72

show interface A-74

show inventory A-75

show logging A-76

show logins A-78

show memory A-78

show ntp A-79

show ports A-80

show process A-81

show repository A-82

show restore A-83

Contents

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

show running-configuration A-84

show startup-configuration A-85

show tech-support A-86

show terminal A-88

show timezone A-88

show timezones A-89

show udi A-90

show uptime A-91

show users A-92

show version A-92

ACS Configuration Commands A-93

access-setting accept-all A-93

debug-adclient A-94

debug-log A-95

decrypt-support-bundle A-98

export-data A-98

import-data A-100

import-export-abort A-101

import-export-status A-103

no debug-adclient A-104

no debug-log A-105

replication force-sync A-107

reset-management-interface-certificate A-108

show debug-adclient A-109

show debug-log A-110

Configuration Commands A-112

backup-staging-url A-113

cdp holdtime A-114

cdp run A-114

cdp timer A-115

clock timezone A-116

do A-118

end A-120

exit A-121

hostname A-122

icmp echo A-122

interface A-123

ip address A-124

ip default-gateway A-125

ip domain-name A-126

Contents

vii

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

ip name-server A-126

ip route A-127

kron occurrence A-129

kron policy-list A-130

logging A-132

ntp server A-133

password-policy A-134

repository A-135

service A-137

shutdown A-137

snmp-server community A-138

snmp-server contact A-139

snmp-server host A-139

snmp-server location A-140

username A-141

LOSSARY

NDEX

Contents

viii

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

Preface

This guide describes how you can configure and maintain Cisco Secure Access Control System

(ACS) 5.1 by using the command-line interface (CLI). Each topic provides a high-level summary of the

tasks required for using the CLI in the Cisco Application Deployment Engine (ADE) OS 1.2 that, in

combination with ACS 5.1, runs on the CSACS-1121 appliance.

This preface includes:

• Who Should Read This Guide, page ix

• How to Use This Guide, page ix

• How This Guide Is Organized, page x

• Document Conventions, page x

• Documentation Updates, page xi

• Related Documentation, page xi

• Obtaining Documentation and Submitting a Service Request, page xii

Note Use this guide in conjunction with the documentation listed in Related Documentation, page xi.

Who Should Read This Guide

The majority of the instructions in this guide are straightforward; however, a few are complex. Therefore,

only experienced users should use these instructions.

Note Use this guide in conjunction with the documentation listed in Related Documentation, page xi.

How to Use This Guide

Cisco makes the following recommendations for using this document:

• Read the document in its entirety. Subsequent sections build on information and recommendations

discussed in previous sections.

• Use this document for all-inclusive information about the ACS appliance.

• Do not vary the command-line conventions (see Document Conventions, page x).

CLI Reference Guide for the Cisco Secure Access Control System 5.1

OL-18996-01

Preface

How This Guide Is Organized

This table lists the major sections of this guide.

Document Conventions

This guide uses the following conventions to convey instructions and information.

Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the

manual.

Tip Means the following information will help you solve a problem. A tip might not consist of an action or

troubleshooting help, but could still contain useful information.

Caution Means reader be careful. In this situation, you might do something that could result in equipment

damage or loss of data.

Chapter Title Description

Chapter 1 Overview of the ACS Command

Line Interface

Provides an overview of the ACS CLI environment

and command modes.

Chapter 2 Using the ACS Command Line

Interface

Describes how you can access and administer ACS

from the CLI.

Appendix A ACS Command Reference Provides a complete description of all the commands.

Convention Description

bold font Commands and keywords.

italic font Variables for which you supply values.

[ ] Keywords or arguments that appear within square brackets are optional.

{x | y | z} A choice of required keywords appears in braces separated by vertical bars. You

must select one.

courier font Examples of information displayed on the screen.

bold courier font Examples of information you must enter.

< > Nonprinting characters (for example, passwords) appear in angle brackets.

[ ] Default responses to system prompts appear in square brackets.

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco UCS 5100 Kurzanleitung

Cisco

Cisco NAC-3300 Series Bedienungsanleitung

Cisco

Cisco NCS 1001 Bedienungsanleitung

Cisco

Cisco MCS-7825-H1-IPC1 Bedienungsanleitung

Cisco

Cisco TD 92322GB Bedienungsanleitung

Cisco

Cisco SNS-3515 series Handbuch

Cisco

Cisco ONS 15454 Handbuch

Cisco

Cisco C460 M4 Bedienungsanleitung

Cisco

Cisco UCS B22 M3 Handbuch

Cisco

Cisco UCS C460 Montage- und Wartungsanleitung

Cisco

Cisco UCS C Series Bedienungsanleitung

Cisco

Cisco UCS S3260 M5 Leitfaden

Cisco

Cisco UCS B440 M2 Bedienungsanleitung

Cisco

Cisco Nexus 7000 Series Bedienungsanleitung

Cisco

Cisco APP1000 - One Application Server Appliance Bedienungsanleitung

Cisco

Cisco UCS B200 M4 Handbuch

Cisco

Cisco TelePresence Server 7010 Referenzhandbuch

Cisco

Cisco CDE 220 Series Handbuch

Cisco

Cisco Catalyst 6800 Bedienungsanleitung

Cisco

Cisco TelePresence Video Communication Server... Bedienungsanleitung

Cisco

Cisco UCS C480 M5 Montageanleitung

Cisco

Cisco UCS C250 Montage- und Wartungsanleitung

Cisco

Cisco UCS B200 M5 Handbuch

Cisco

Cisco expressway ce1100 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung