Cisco UCS 5100 Handbuch

Set up Syslog for Cisco UCS

Document ID: 110265

Contents

Introduction

Prerequisites

Requirements

Components Used

Conventions

Configure

Network Diagram

Steps to Configure Syslog to a Local File

Steps to Configure Syslog to a Remote Syslog Server

Verify

Troubleshoot

Related Information

Introduction

Cisco Unified Computing System (UCS) provides several diagnostic tools to aid in troubleshooting and

monitoring the environment. These tools include: command line debug statements, syslog, and SNMP (Call

home is another diagnostic/reporting tool). Syslog is the mechanism for processes and scripts to write log

entries. The callers can fully specify all of the log entries' characteristics.

A syslog daemon in the system captures logs and saves them in a rotating buffer. These logs can be viewed

internally or exported to syslog collectors. Multiple syslog collectors can be specified through configuration.

Prerequisites

Requirements

Cisco recommends that you:

Have a working knowledge of Cisco UCS Server Blade software and hardware.• Be familiar with the UCS Manager application.• Understand the impact and implications of the different commands described in this document.• Be familiar with the UCS components and topology. Refer to the diagram below for a typical

solution.

•

Components Used

The information in this document is based on Cisco UCS System.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Configure

The Cisco UCS Manager starts the syslog daemon and makes certain that it is active in both UCS fabric

interconnects. Logs generated by the processes in the NXOS and UCS Manager are exported to the same

configured external collectors.

All UCS Manager events are stored in the same fabric they were generated. As expected the passive fabric

interconnect will generate less log entires than the active, but some events are still expected. In order to ease

the parsing of the logs, all entries by the UCS Manager include the UCS hostname while the NXOS entries

include the fabric hostname.

These are a few examples of situations that will generate a syslog entry:

DME lifecycle events• Faults• Ad−hoc messages• Events relayed by the BMC and CMC processes•

Network Diagram

This is a typical topology used with Cisco UCS:

Steps to Configure Syslog to a Local File

This is the procedure:

Log in to Cisco UCS Manager.1. In the navigation pane, choose the Admin tab.2. Expand Faults, Events and Audit Log, then choose Syslog.3. In the work pane to the right, under File, choose enabled for the Admin State.4. Choose the alarm level from the drop down menu.5. Click Save Changes.6.

Steps to Configure Syslog to a Remote Syslog Server

For this configuration procedure, it is assumed that a syslog server was configured and is operating in the

network.

Log in to Cisco UCS Manager.1. In the navigation pane, select the Admin tab.2. Expand Faults, Events and Audit Log, then choose the Syslog option.3. In the work pane to the right, enable Remote Server #, enter IP address of syslog server, select

appropriate Levels and Facility.

Click Save Changes.5.

Verify

You should begin to see events logged on to your syslog server and local files on Cisco UCS.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

Cisco Systems, Inc.

Updated: Apr 27, 2010 Document ID: 110265

Andere Handbücher für UCS 5100

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco UCS Invicta C3124SA Bedienungsanleitung

Cisco

Cisco MSE 3365 Bedienungsanleitung

Cisco

Cisco UCS B22 M3 Bedienungsanleitung

Cisco

Cisco UCS C220 M3 Montage- und Wartungsanleitung

Cisco

Cisco S195 Bedienungsanleitung

Cisco

Cisco AS5300 - Universal Access Server Bedienungsanleitung

Cisco

Cisco Cisco MeetingPlace Express Betriebsanleitung

Cisco

Cisco SNS-3415 series Bedienungsanleitung

Cisco

Cisco UCS B200 Handbuch

Cisco

Cisco UCS C220 M3 Systemhandbuch

Cisco

Cisco UCS C Series Bedienungsanleitung

Cisco

Cisco UCS B460 M4 Handbuch

Cisco

Cisco ACE-4710-1F-K9 Bedienungsanleitung

Cisco

Cisco TelePresence Bedienungsanleitung

Cisco

Cisco UCS C200 Montage- und Wartungsanleitung

Cisco

Cisco C880 M4 Montageanleitung

Cisco

Cisco UCS B420 M3 Bedienungsanleitung

Cisco

Cisco UCS C210 Montage- und Wartungsanleitung

Cisco

Cisco UCS B420 M3 Handbuch

Cisco

Cisco CRS-16 DC Bedienungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco Firepower 1120 Bedienungsanleitung

Cisco

Cisco 2501 - Router - EN Bedienungsanleitung

Cisco

Cisco ISE-3315 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung