Clarke Air CHV18WF Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC0620 - ISS 1

HIGH VELOCITY WALL FAN

MODEL NO: CHV18WF

PART NO: 3231800

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Wall Fan.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

SPECIFICATIONS

MODEL CHV18WF

Voltage 230 V AC (50Hz)

Wattage 120 W

Ingress protection rating IPX0

Operating temperature range 10 to 25oC

Safety devices Thermal link

Maximum air flow 70.3 m3/min

Fan Speeds

Setting 1 1200 rpm

Setting 2 1280 rpm

Setting 3 1360 rpm

Max Fan Flow Rate 70 m3/min

Fan power input 92.8 W

Service value 0.8 m3/min/W

Fan sound power 63 dB

Maximum air velocity 4.0 m/s

Seasonal electricity consumption 29.7 kWh/a

Dimensions (W x H x D) 510 x 510 x 320 mm

Swivel range 15o

Weight 5.2 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1. ALWAYS read this manual before use.

2. DO NOT use in environments containing chemical fumes etc.

3. DO NOT use as an extractor fan.

4. DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.

5. DO NOT connect the fan to a duct system.

6. DO NOT cover the fan with clothing or any material that will restrict free

airflow through the fan.

7. NEVER touch the blades with your hand or any object.

8. ALWAYS unplug the fan before performing maintenance. Don’t touch the

fan when your hands are wet.

9. DO NOT attempt to disassemble, repair or rebuild the fan.

10. NEVER use the fan if the cable or plug are damaged.

11. NEVER use the fan close to fires.

12. DO NOT use this fan with any solid-state speed control device to reduce

the risk of fire or electric shock.

13. Avoid using in dusty environments.

14. Suitable for indoor use only.

ENVIRONMENTAL RECYCLING POLICY

By purchasing this product, the customer is taking on the obligation to

deal with its safe disposal in accordance with the Waste Electrical and

Electronic Equipment (WEEE).

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

If disposing of this product or any damaged components, do not dispose of

with general waste. This product contains valuable raw materials. Metal

products should be taken to your local civic amenity site for recycling of metal

products.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

This product may be fitted with a non-rewireable plug. If it is necessary to

change the fuse in the plug, the fuse cover must be refitted. If the fuse cover

becomes lost or damaged, the plug must not be used until a suitable

replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due

to damage, it should be cut off and a replacement fitted, following the wiring

instructions shown below. The old plug must be disposed of safely, as insertion

into a mains socket could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond

with the markings on the terminals of your plug, proceed as follows.

• Connect the Blue wire to the terminal marked N.

• Connect the Brown wire to the terminal marked L.

• Connect the Yellow and Green wire to the terminal marked E or

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs

yourself.

WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE

MAINS SUPPLY.

WARNING! THE WIRES IN THE POWER CABLE OF THIS PRODUCT

ARE COLOURED AS FOLLOWS:

Blue = Neutral Brown = Live Yellow and Green = Earth

Plug must be BS1363/A approved.

Always fit a 13 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral

(Blue)

Live

(Brown)

Earth

(Green and Yellow)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

COMPONENT PARTS

INSTALLATION

1. Attach the base/tube to wall at

least 7 feet (2.5 metres) above the

floor to provide adequate over

head clearance.

• Expansion bolts are supplied for

mounting to a masonry wall but

if mounting to a timber

structure, suitable woodscrews

will be required.

2. Attach the motor assembly to the

base/tube with the bolt as indicated and tighten the 2 x locking screws.

3. Attach the power cable to the support tube with the cable clip.

4. Fit the rear grille over the motor shaft and secure with the 4 x screws.

5. Fit the fan blades to the motor shaft, ensuring the set screw is in line with the

flat groove in the shaft. Tighten the setscrew securely.

6. Attach the front grille to the rear grille with the clips around the perimeter.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATING

1. Adjust the angle of tilt by

loosening the adjusting knob and

positioning the fan as required.

Re-tighten the knob to secure.

2. Pull the operating cord 1, 2 or 3

times, to select the fan speed

required.

• Position 0 - Off

• Position 1 - 1200 rpm

• Position 2 - 1280 rpm

• Position 3 - 1360 rpm

3. Pull the other cord to set the fan

oscillating if required.

MAINTENANCE

Have any repairs carried out by a suitably qualified person.

• The motor bearings are permanently sealed for life and do not

require any additional lubrication.

CLEANING

If the fan has been operating for long periods the blades and motor assembly

may eventually require cleaning.

1. Release the clips retaining the front guard and lift it away carefully.

WARNING: NEVER OPERATE THE FAN WITH THE FRONT GRILL REMOVED.

ALWAYS DISCONNECT THE POWER CABLE FROM THE POWER SUPPLY

BEFORE PERFORMING MAINTENANCE WORK

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

2. Wipe the fan blades with dry cloth and remove any dust from the motor

assembly with a soft brush, vacuum cleaner or jet of compressed air.

• Always wear a dust mask and glasses when using compressed air.

• Never use any cleaning product or any corrosive liquid that will

damage the surface finish.

3. Replace the guard securely before use.

DECLARATION OF CONFORMITY

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Lüfter Handbücher

Clarke

Clarke CDF20HV-P Installations- und Betriebshandbuch

Clarke

Clarke CFF18C100 Bedienungsanleitung

Clarke

Clarke Air CDF18HV-B Installations- und Betriebshandbuch

Clarke

Clarke air movers Handbuch

Clarke

Clarke CONTRACTOR CON350 Bedienungsanleitung

Clarke

Clarke CAM36C Bedienungsanleitung

Clarke

Clarke CAM24C Bedienungsanleitung

Clarke

Clarke CBF20 Bedienungsanleitung

Clarke

Clarke CAM30110V Bedienungsanleitung

Clarke

Clarke Air CAM24 Bedienungsanleitung

Clarke

Clarke CSF2 Bedienungsanleitung

Clarke

Clarke CAM24R Bedienungsanleitung

Clarke

Clarke CAM14HV Bedienungsanleitung

Clarke

Clarke Air CAM36 Bedienungsanleitung

Clarke

Clarke Contractor CON305 Bedienungsanleitung

Clarke

Clarke CAM500 Bedienungsanleitung

Clarke

Clarke CAF304 Bedienungsanleitung

Clarke

Clarke AIR CAM6000 Bedienungsanleitung

Clarke

Clarke CFF18B100 Bedienungsanleitung

Clarke

Clarke Air Series Bedienungsanleitung

Clarke

Clarke CPF18B Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON500 Bedienungsanleitung

Clarke

Clarke CPF18B100 Bedienungsanleitung

Clarke

Clarke CBF18 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung

Clarke air CHV18WF Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken