Clarke CDF20HV-P Installations- und Betriebshandbuch

20” INDUSTRIAL PEDESTAL FAN

MODEL No: CDF20HV-P

Part No: 3231505

OPERATING & MAINTENANCE

INSTRUCTIONS

20” INDUSTRIAL PEDESTAL FAN

0104

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period

of 12 months from the date of purchase. Please keep your receipt as proof

of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product

can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Please read these instructions carefully before operating the tool

Thank you for purchasing this CLARKE 20” Industrial Pedestal Fan.

Before using the device, please read this manual thoroughly and carefully follow

instructions given. This is for your own safety and that of others around you, and is

also to help you achieve long and trouble free service from your new fan.

PARTS & SERVICE TEL: 020 8988 7400

or e-mail as follows:

PARTS: [email protected]

SERVICE: [email protected]

Please note that the details and specifications contained herein are correct at the time of going to

print. However CLARKE International reserve the right to change specifications at any time without

prior notice. Always consult the machines data plate

-1-

Specifications

The CDF20HV-P fan is a high output fan designed for industrial use. Constructed entirely

from steel, it has a spring loaded extendable tilt pedestal stand

Model: .................................................................................... CDF20HV-P

Part No: .................................................................................. 3231505

Voltage: .................................................................................. 230vac

Wattage: ................................................................................ 116w

Speeds: ................................................................................... 3

Dimensions (LWH): ................................................................. 650x550x1270mm

Height Extended: .................................................................. 1582mm

Weight: ................................................................................... 18Kg

List of Contents

Before commencing with assembly, check for damage and shortages etc. Any damage

or shortage should be reported to your Clarke dealer where the fan was originally purchased.

1 x Base assembly with castors

1 x Tube Assembly

1 x Fan Assembly

4 x M6 x 35 Pan Head Screws

2 x M6 x 20 Hex Head Screws

2 x Ø 6mm Plain Washers

2 x Ø 6mm Lock Washers

-2-

Safety Precautions

DO NOT use in dusty environments.

DO NOT use in environments with high fumes from chemicals etc.

DO NOT use as an extractor fan.

DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.

DO NOT connect fan to ducting system.

This machine must be wired up in accordance with the following colour code:

BLUE - NEUTRAL

BROWN - LIVE

GREEN/YELLOW - EARTH

Connect the BLUE coloured cord to the plug terminal marked “N”

Connect the BROWN coloured cord to the plug terminal marked “L”

Connect the GREEN/YELLOW coloured cord to the plug terminal marked “E”

If this appliance is fitted with a plug which is moulded on to

the electric cable (i.e. non-rewireable) please note:

1. The plug must be thrown away if it is cut from the

electric cable. There is a danger of electric shock if it

is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

Fuse Rating

The fuse in the plug must be replaced with one of the same rating (13 amps) and this

replacement must be approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

Cable Extension

Always use an approved cable extension suitable for the power rating of this tool (see

specifications), the conductor size should also be at least the same size as that on the

machine, or larger. When using a cable reel, always unwind the cable completely.

3. Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local dealer or most electrical

stockists.

IMPORTANT:

If a cable extension is needed, it is essential to comply with the following data.

Voltage Extension length Cable section

230v Up to 20m 2. mm2

230v From 20 to 0m 4mm2

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for

connection to a standard, domestic electrical supply. Should the plug need changing at

any time, ensure that a plug of identical specification is used.

Electrical Connections

WARNING ! THIS APPLIANCE MUST BE EARTHED

-3-

Assembly

1. Attach the Reinforcing plate, (item 22) to the underside of base, (item 21)

using four 5mm screws and lockwashers supplied.

2. Attach the wheel holders, (item 23) and wheels, (item 24) to the base using four

5mm screws nuts and lockwashers supplied.

3. Attach the outer tube, (item 20) to the base by raising the bell exposing the

flange, secure using four 6mm screws and lockwashers supplied, lower the bell to

hide the fixing screws

Before continuing, ensure all screws etc are securely tightened.

4. Attach Inner tube, (item 18) to the fan holder, (item 16) using two clips, (item 17)

and securing with four 6mm screws, nuts and lockwashers.

NOTE: loosely attach the clips to the fan holder first using the two

shorter screws, then insert the inner tube into the clips, and

secure using the two longer screws. Securely tighten

before continuing.

5. Insert the inner tube into the Outer tube

and lock in place with the securing knob,

(item 19a).

6. Using a large flat bladed screwdriver, gently

pry the front fan grill off the

back grill.

7. Attach the fan to the fan

holder using the two coach

type bolts, rubber spacers and locking

knobs. Ensure the rubber spacer is fitted

between the fan and fan holder, see Fig. 1.

8. Refit front grill.

9. Adjust to required height and angle.

10. Plug in and switch on, adjust the fan speed to suit.

IMPORTANT

NEVER use the fan with grills removed.

Cleaning

Ensure the fan is switched off, and isolated from the main electrical supply by

removing the plug from the socket.

Do not use any harmful cleaning agents for cleaning.

Only use a clean soft dampened cloth, wipe dry after cleaning.

DO NOT bend the blades.

The motor bearings are permanently sealed and do not require any additional

lubrication.

Locking knob

Washer

Fan Holder

Rubber Spacer

Rear Grill

Fig. 1

-4-

Parts Diagram

-5-

Parts List

Item Part Number Description Qty

1 OT20001 Front Grill 1

2 OT20002 Fan Blade 1

3 OT20003 Screw 1

4 OT20004 Screw 4

5 OT20005 Motor 1

6 OT20006 Rear Grill 1

7 OT20007 Nut 4

8 OT20008 Screw 2

9 OT20009 Rubber Spacer 2

10 OT20010 Lock Nut 2

11 OT20011 Knob 1

12 OT20012 Power Cord 1

13 OT20013 Switch Box 1

14 OT20014 Capacitor 1

15 OT20015 Switch 1

16 OT20016 Fan Holder 1

17 OT20017 Clip 2

18 OT20018 Inner Tube 1

19 OT20019 Connector 1

19a OT20019a Locking Knob 1

20 OT20020 Outer Tube Assy 1

21 OT20021 Base 1

22 OT20022 Reinforcing Plate 1

23 OT20023 Wheel Holder 2

24 OT20024 Wheel 2

-6-

Inhaltsverzeichnis

Andere Clarke Lüfter Handbücher

Clarke

Clarke CBF20 Bedienungsanleitung

Clarke

Clarke CSF2 Bedienungsanleitung

Clarke

Clarke CAM30B Bedienungsanleitung

Clarke

Clarke CAM30110V Bedienungsanleitung

Clarke

Clarke CAM14HV Bedienungsanleitung

Clarke

Clarke CAM200B Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON500 Bedienungsanleitung

Clarke

Clarke Air CAM36 Bedienungsanleitung

Clarke

Clarke CAM500 Bedienungsanleitung

Clarke

Clarke CAF304 Bedienungsanleitung

Clarke

Clarke CFF18B Bedienungsanleitung

Clarke

Clarke CAM24B Bedienungsanleitung

Clarke

Clarke air CHV18WF Bedienungsanleitung

Clarke

Clarke Air CAM5002 Bedienungsanleitung

Clarke

Clarke CAM110 Bedienungsanleitung

Clarke

Clarke Air CDF18HV-B Installations- und Betriebshandbuch

Clarke

Clarke CDF20HV-B Installations- und Betriebshandbuch

Clarke

Clarke Air CAM900 Installations- und Betriebshandbuch

Clarke

Clarke CONTRACTOR CON400 Bedienungsanleitung

Clarke

Clarke CAM5002 Installations- und Betriebshandbuch

Clarke

Clarke AIR CAM6000 Bedienungsanleitung

Clarke

Clarke Air CBF20 Bedienungsanleitung

Clarke

Clarke CAM400 Bedienungsanleitung

Clarke

Clarke CFF18C100 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung