Clarke STP12 Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

LS1015

SUBMERSIBLE TRANSFER PUMP

MODEL NO: STP12

PART NO: 7260050

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE product.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

LIMITATIONS OF USE

This pump must only be used to transfer:

•Cleanwater

•Dieselfuel

• Paraffin

DO NOT use this pump for pumping:

• Slurry

• Septic Tanks

• Sandy or dirty water

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

WARNING: DO NOT USE FOR PUMPING PETROL

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

CONTENTS

Please check the contents to ensure they are complete and that no transit

damage has occurred.

Should any damage be apparent, please contact your Clarke dealer

immediately.

SPECIFICATIONS

12 Volt Submersible Pump (with 3.8 m

supply cable with crocodile clips)

2 x hose clips

15mm metal delivery tube 3m delivery hose

Flow Rate 21 litres/min. for diesel and kerosene

19 litres/min. for clean water

Minimum Water Depth 40 mm

Pump Outlet Size 19 mm (external diameter)

Voltage 12 V

Current 4.5A DC

Pressure 0.23 bar

Height 160 mm

Diameter 55.5 mm

Weight 0.67 kg

Duty Cycle 15 mins on, 15 mins off in 30 min cycle

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY INSTRUCTIONS

1. ALWAYS disconnect the pump from the power supply before carrying out

maintenance operations.

2. ALWAYS examine the power cable before use to make sure that it is not

damaged.

3. ALWAYS make sure that the filter is clean and serviceable before use.

4. Do not let the pump run dry (Minimum water depth is 40 mm).

5. DO NOT exceed the duty cycle - see Specifications.

6. DO NOT use the pump if any parts appear to be damaged. Have the

pump repaired by your Clarke dealer.

7. DO NOT use the pump for any purpose other than that for which it is

intended.

8. DO NOT operate the pump continuously - e.g. in a fish pond or collection

tank, water feature etc.

9. DO NOT use or keep the pump in freezing conditions.

10. DO NOT allow uncontrolled discharge of contaminated liquid etc. ALWAYS

collect in a container and dispose of according to all H&S regulations and

local laws.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

USING THE PUMP

1. Always make sure that the pump is in a good working condition and:

• has no signs of damage

• the filter is in place and perfectly clean

• the power cable is in perfect condition

2. Attach the flexible hose to the outlet, securing with the hose clip supplied.

3. If required, attach the metal tube to the discharge end of the flexible hose,

securing with the hose clip supplied.

4. Carefully lower the pump into the tank or sump etc., to be drained.

5. Connect the clamps to the 12 Volt battery and use the in-line switch to turn

the pump on.

IMPORTANT: Connect the red - positive clamp to the red positive terminal

of the battery FIRST, then connect the black clamp to the black - negative

terminal, ensuring both clamps are perfectly secure.

6. When disconnecting - ALWAYS disconnect the black - negative clamp

FIRST.

7. Always observe the pump discharge. Should flow/performance

deteriorate during use, it is probable that the filter is becoming blocked.

UNBLOCKING THE FILTER

1. Disconnect the pump from the battery - black terminal first, then carefully

withdraw the pump from the pit or sump etc. DO NOT yank the cable.

2. Unscrew the base and remove the filter. Either clean thoroughly or replace

as necessary, then check the impeller to ensure it is free to rotate and is not

blocked.

3. When satisfied, replace pump in sump or pit etc., and proceed to pump

once more.

4. When finished, ALWAYS remove the filter and clean it thoroughly, then allow

it to dry.

5. Thoroughly clean the pump with clean water and ensure the impeller is

completely free to rotate and is free of any contaminants.

6. Reassemble the pump and store in a clean, dry environment.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

EXPLODED PART LIST AND DIAGRAM

Part numbers are STP12+(the number of the part above)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATION OF CONFORMITY

Inhaltsverzeichnis

Andere Clarke Wasserpumpe Handbücher

Clarke

Clarke CPP3000B Bedienungsanleitung

Clarke

Clarke PW2 Bedienungsanleitung

Clarke

Clarke HIPPO-3 Handbuch

Clarke

Clarke CGP870 Bedienungsanleitung

Clarke

Clarke PW50 Bedienungsanleitung

Clarke

Clarke PSP105 Bedienungsanleitung

Clarke

Clarke C10 Handbuch

Clarke

Clarke CPE20A3 Bedienungsanleitung

Clarke

Clarke PSV3A Installations- und Betriebshandbuch

Clarke

Clarke CSV4A Bedienungsanleitung

Clarke

Clarke CBT1300SS Bedienungsanleitung

Clarke

Clarke CPE30A1 Bedienungsanleitung

Clarke

Clarke CBM100SS Installations- und Betriebshandbuch

Clarke

Clarke CBM240E Bedienungsanleitung

Clarke

Clarke PSV3A Bedienungsanleitung

Clarke

Clarke TAM101 Installations- und Betriebshandbuch

Clarke

Clarke CRWP1 Bedienungsanleitung

Clarke

Clarke ECP15A1 Bedienungsanleitung

Clarke

Clarke CHF2 Installations- und Betriebshandbuch

Clarke

Clarke CPE Series Bedienungsanleitung

Clarke

Clarke DW50 Bedienungsanleitung

Clarke

Clarke CFT230 Handbuch

Clarke

Clarke CSE400A Bedienungsanleitung

Clarke

Clarke HIPPO 2 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung