Classic Exhibits SACAGAWEA DESIGNS VK-1222 Handbuch

Order #XXXXX

Locked layer contains

placeholder marks.

Top View

Perspective View

Scale: 18

10’

VK-1222 General Layout

If you would like to tell us about your experience with your setup instructions please email us at [email protected]

SETUP INSTRUCTIONS

Order #XXXXX

DO NOT USE POWER TOOLS

ALL CONNECTIONS MUST

BE TIGHTLY SECURED

Part Identification - Numbering

Spline Connection Base Plate & Extrusion Connection

General Setup Instructions

- Read entire setup instruction manual prior to

unpacking parts and pieces.

- The setup instructions are created specifically

for this configuration.

- Setup instructions are laid out sequentially in

steps, including exploded views with detailed

explanation for assembly.

WARNING

Cleaning & Packing

- For Cleaning Metal, Plex, & Laminate Parts:

Use a MILD NON-ABRASIVE cleanser and

soft cloth/paper towel to clean all surfaces.

- Keep exhibit components away from heat

and prolonged sun exposure.

Heat and UV exposure will warp and

fade components.

- Retain all provided Packing Materials.

All provided packing materials are for

ease of repacking & component protection.

Disassembly

- For loss prevention, tighten all set screws

and locks during disassembly.

Hex Tool - Essential for Assembly

Extrusion & Lock Connection Engaged Lock

LADDERS OR LIFTS

MAY BE REQUIRED

General Information

Case 1 of 1

Order #XXXXX

Locked layer contains

placeholder marks.

Top View of Each Level

Level 1 (Bottom Level) Level 2 Level 3

Base

Plate

10A 11

Assembled Header

11A

Counter

Top

Graphic

Lights

Setup Hardware

w/ Shelf

4A, 4B, 5A, 5B

2B,2A 3A,3B

A,A

Graphic

Wings

Case Packing

Step 1 of 2

Order #XXXXX

Item

2A,2B

3A,3B

4A,4B

5A,5B

6A,6B

Description

Base Plate

42” Vertical Extrusion w/ Clamps

45” Horizontal Extrusion

2.5” Angle-Cut Vertical Extrusion

Qty.

1,1

Horizontal Placement

Stopper

Set upper horizontal extrusion

on top of stopper of verticals.

Velcro on

Back/Bottom Edge

Velcro on

Back/Top Edge

Velcro on

Back/Inside Edges

of Verticals

Connection Bar A

ACompleted Backwall Assembly

FRONT VIEW

Slide connection bar between

extrusions, then turn knobs

clockwise to tighten lock.

Straight Connection

with Knobs

Do not over tighten Knobs

Knob

Corner Connection

with Knob

Turn knob clockwise

to tighten lock.

Do not over tighten Knobs

Knob

Keep connection bars [A] attached to

[4A] [5A] and [B] to [2A] [3A].

Set Screw

Connector

Back View of Backwall

Insert connector into groove

of vertical extrusion, then

tighten set screw to secure.

Velcro

2.5” Angle-Cut

Extrusion Attachment

Keep [6A] attached to [2B] and [6B]

attached to [3B].

Velcro on extrusions

must face to BACK of

assembled Backwall.

Steps:

1) Attach base plates [1] to verticals [2A] and [3A], using bolts.

2) Connect verticals [2A to 2B] and [3A to 3B] with connection bars [B].

See Straight Connection with Knobs detail.

3) Connect horizontals [4A to 4B] and [5A to 5B] with connection bars [A].

See Straight Connection with Knobs detail.

4) Connect vertical assemblies [2A/2B] and [3A/3B] to horizontal assemblies

[4A/4B] [5A/5B]. See Corner Connection with Knob detail.

5) Attach graphic to Velcro on back of assembled Backwall.

Clamp

Keep clamps attached to [2A] [2B] [3A]

and [3B].

VK-1222 Backwall Assembly

Step 2 of 2

Order #XXXXX

Completed Assembly

5A *

Item

7/8/9

10A

10/11

11A

Description

Assembled Header Frame

Support Leg

Assembled Counter Support

Mounting Plate

Qty.

1/1/1

1/1

Steps:

1) Connect lights to [5A/5B]. See Light Connection detail.

2) Attach assembled header frame [7/8/9] to [5A/5B].

3) Attach fabric graphic to Velcro on back of assembled header.

4) Attach counter support [10/11] to [2A].

5) Attach support leg [10A] to counter support [10/11].

6) Attach shelf to extrusion [2A].

7) Attach counter to mounting plate [11A]. See Counter Attachment sheet.

8) Route USB cords from counter. See USB Cord Management sheet.

9) Attach wings to clamps on [2A/2B] and [3A/3B]. See Clamp Attachment detail.

10) Attach graphic to [3B]. See Graphic Attachment detail.

Keep [10] and [11] assembled.

Keep [7] [8] and [9] assembled.

10A

Graphic

Wing

Shelf

Slide light onto clip then lock clip

into groove of horizontal extrusion.

Clip

Light

Light Connection

Clip

Light

Horizontal Extrusion

Velcro on extrusions

must face to BACK of

assembled Backwall.

Connector

Graphic Attachment

Cap

Graphic

Standoff

Slide connector into groove of extrusion.

Tighten set screws to secure in place.

Screw standoff into connector. Place

graphic between standoff and cap then

tighten cap to secure graphic.

When desired location

is found, tighten

set screw to secure.

Slide connector, located on

back of clamp, into groove

of extrusion.

Clamp

Clamp Attachment

Keep clamps attached to verticals, when packing.

Knob

Set Screw

A10 Clamp

11A

VK-1222 Backwall Attachments

Inhaltsverzeichnis

Andere Classic Exhibits Inneneinrichtung Handbücher

Classic Exhibits

Classic Exhibits Symphony SYM-408 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-2038 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1235 Bedienungsanleitung

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1711 Handbuch

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1722 Handbuch

Classic Exhibits

Classic Exhibits visionary designs VK-1359 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1180 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SYMPHONY SYM-406B Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS VK-4022 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-2005 Handbuch

Classic Exhibits

Classic Exhibits SACAGAWEA DESIGNS VK-2113 Bedienungsanleitung

Classic Exhibits

Classic Exhibits eco systems ECO-2041 Handbuch

Classic Exhibits

Classic Exhibits MAGELLAN DESIGNS VK-1088 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Symphony SYK-1030 Handbuch

Classic Exhibits

Classic Exhibits SACAGAWEA DESIGNS VK-1232 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS LTK-1152 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids VK-1049 Handbuch

Classic Exhibits

Classic Exhibits eco systems ECO-8C Handbuch

Classic Exhibits

Classic Exhibits GRAVITEE GOD-1559 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-1016 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-2037 Handbuch

Classic Exhibits

Classic Exhibits Perfect 10 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary VK-2098 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Curved Counter Handbuch

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung