Classic Exhibits SACAGAWEA DESIGNS VK-2113 Bedienungsanleitung

www.classicexhibits.com

Step 1

Page 1 of 4

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Sacagawea - VK-2113 - General Layout

10’

20’

Plan View

www.classicexhibits.com

Step 2

Page 2 of 4

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Sacagawea - General Information

Using You Set-up Instructions:

The Visionary Designs Set-up Instructions for Sacagawea displays are created

specifically for your configuration. They are laid out sequentially, including an

exploded view of the entire display and a logical series of detailed steps for

assembly. We encourage you to study the instructions before attempting to

assemble your exhibit.

THIS IS VERY IMPORTANT!

Each page reminds you to tighten the setscrews after disassembling your

exhibit to prevent loss of the locks and setscrews (see below in red).

Cleaning & Packing Your Display:

1) Use care when cleaning aluminum extrusions or acrylic inserts. Use only

non-abrasive cleaners.

2) When cleaning laminate inserts or counter tops, use mild cleansers and

a soft material such as cotton.

3) Keep all display components away from extreme heat and long exposure

to sunlight to avoid warping and fading.

4) Retain all packing materials. It will make re-packing much easier and will

reduce the likelihood of shipping damage.

Hex Key Tool Typical Connection Typical Connection

Most visionary design exhibits can

be assembled with the supplied Hex

Key Tool. Occasionally, a flat head

screwdriver may be required. Detail A: Most horizontal extrusion connections have a patented expandable lock. This lock inserts into

the groove of an opposing extrusion. Tightening the lock with the Hex Key Tool expands the lock and creates

a strong positive connection.

Numbered

Label

Detail B: Each extrusion contains a numbered label that

corresponds to set-up instructions. The label is located

within a groove of the extrusion (when possible). Visionary

Design labels contain Black numbers unless otherwise

specified.

Horizontal Connection

Detail C: A rectangular connection bar with plastic

T Knobs is inserted between two horizontal extrusions

joined end-to-end. Turn the knobs clockwise to tighten.

Base Plate Connection Vertical Connection Corner Connection

Detail D: Attach vertical extrusions to base

plates with supplied bolts inserted through

the hole in the plate. Be careful not to strip

the thread.

Detail E: A square connection bar with

plastic T Knobs is inserted between two

vertical extrusions joined end-to-end. Turn

the knobs clockwise to tighten.

Detail F: Plastic Star Knobs are

used to tighten locks where

horizontal extrusions connect with

vertical extrusions. Turn the knobs

clockwise to tighten. Turn counter-

clockwise to loosen, but do not

remove knob.

Do Not Overtighten.

www.classicexhibits.com

Step 1

Page 1 of 4

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Sacagawea - Backwall Assembly

indicates

location of connection

lock with knob.

Note: Slide connection

bar between extrusions and

tighten knobs to secure.

Connection Bar

Item

2a/2b

3a/3b

2c/2d

3c/3d

4a/4b

5a/5b

4c/5c

Description

Base Plate

42” Vertical Extrusion w/ A10 Clamps

42” Vertical Extrusion

42” Vertical Extrusion w/ A10 Clamps

45” Horizontal Extrusion

24” Horizontal Extrusion

Qty.

1/1

Steps:

1) Attach base plates [1] to lower verticals [2a,3a,2c,3c] with bolts.

2) Connect upper verticals [2b,3b,2d,3d] to lower verticals [2a,3a,2c,3c] with connection bars [b].

3) Connect horizontals [4a,4b] and [5a,5b] with connection bars [a].

4) Connect vertical assemblies [2a/2b,3a/3b,2c/2d,3c/3d] with horizontal assemblies [4a/4b,5a/5b]

and horizontals [4c,5c] as shown.

5) Attach graphics to velcro on back side of frame.

Turn Knob Clockwise

to Tighten Lock

indicates location of

knobs on BACKSIDE of unit.

Do not over tighten Knobs

Knob

Horizontal Placement

Stopper

Set upper horizontal

bar atop stopper where

indicated on verticals

Front View

Back View

Velcro:

Back/Bottom Edge

Velcro:

Back/Top Edge

Attach graphics

to velcro on back

of frame

a5a

a4a

Velcro:

Back/Top Edge

Velcro:

Back/Bottom Edge

www.classicexhibits.com

Step 2

Page 2 of 4

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Sacagawea - Counter and Wing Attachment

Slide A10 Clamp

into groove

of square extrusion.

When desired location

is found, tighten

set screw to secure.

Set-

Screw

A10

Tighten black plastic

set screw to secure

Wing in place.

Plastic

Knob

Wing Attachment

Keep A10 clamps

attached to verticals

Note: Curved extrusion

[10] and horizontal [11]

stay assembled for

shipping and packing.

10a

Screw

11a

Counter Top Attachment

Insert screws located on underside

of counter into holes on flange plate

and secure with wing nuts.

Wing Nut

Attach graphic

to velcro on back of

header frame

Item

7/8/9

10a

11a

Description

Header Frame

30.2” Curved Extrusion

Leg Support

12.184”w Horizontal Extrusion

Flange Plate

Qty.

2/2/2

Note: Header frame ships

and packs assembled

Steps:

1) Attach lights as indicated.

2) Attach assembled header frames and apply graphics as shown.

3) Attach assembled counter supports [10/11] to verticals where indicated.

4) Attach support legs [10a] to counter supports [10/11].

5) Attach flange plates [11a] to tops of curved extrusions [10] as shown.

6) Attach counter tops to supports, see counter top attachment detail.

7) Attach wings to A10 clamps as shown.

8) Attach round signs to backwall frame as indicated.

Attach graphic

to velcro on back of

header frame

Screw

11a

10a

Monitor Mount Attachment

Slide connectors into groove

of extrusion. Tighten setscrew

to secure in place. Attach

monitor mount to connectors

with screws.

Connectors

Monitor

Mount

www.classicexhibits.com

Step 3

Page 3 of 4

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Sacagawea - Serpentine Canopy Assembly

Steps:

1) Connect canopy pieces together as shown.

2) Apply pillow case graphic to assembled canopy

Push-Button

Push button then rotate

for packing purposes

Connections are made by holding the button

down and sliding the red tube into opposing

tube until the connection is made. To disassemble

push button and pull or twist extrusions apart.

Push-Button

Numbered Label

Using Your Setup Instructions

The Aero Overhead Sign Setup Instructions are created specically for your conguration. They include an

exploded view of the frame which is sequentially numbered. We encourage you to study the instructions

before attempting to assemble your exhibit.

Connections are kept very simple: no tools. Everything assembles with push-button

connectors and pre-connected horizontal sections.

Cleaning and Packing Your Display

1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.

2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood

of shipping damage.

www.classicexhibits.com

Step 4

Page 4 of 4

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Sacagawea - Pedestal Assembly - QTY. 2

Item

13/13a

Qty

2/2

Description

38”h Vertical Extrusion

12”w Horizontal Extrusion

25”w Horizontal Extrusion

Steps

Attach horizontal extrusions [13 and 13a] between vertical

extrusions [12], placing inserts between horizontals.

2) Attach curved horizontal extrusions [14] between

vertical extrusions [12], placing insert between

curved horizontals.

3) Place shelf atop lip of extrusions.

4) Set counter top atop assembled base.

Infill

Top View

Shelf

Counter

Extrusions 13a

have a lip for the

floor to rest

upon.

Lip for Shelf

Placement

Lip

Extrusion Detail

13a

12 12

13a

12 12

Note: Pedestal sides

must stay assembled

when shipping

www.classicexhibits.com

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Case Packing Instruction - Case 1 of 4

Top View

Level 1 Level 2 Level 3

Counter

Top

Base

Plates

10a

2b,2a

4a,4b,5a,5b

3a,3b

Level 4

Wing Panels

Setup Hardware

Graphics

Canopy Pieces

Halogen LightHalogen Light

Assembled Header

www.classicexhibits.com

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx - Case Packing Instruction - Case 2 of 4

Top View

Level 1 Level 2 Level 3

Counter

Top

Base

Plates

10a

2c, 2d

4a,4b,5a,5b

3c,3d

Level 4

Wing Panels

Setup Hardware

Graphics

Canopy Pieces

Halogen LightHalogen Light

Assembled Header

www.classicexhibits.com

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx -

(3) Pedestal Components

Case Packing Instruction - Case 3 of 4

Top View

Level 1 Level 2 Level 3 Level 4

Front Insert

Shelf

Counter Top

14,14

Assembled

Pedestal

Side

Assembled

Pedestal

Side

www.classicexhibits.com

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #xxxxx -

(4) Pedestal Components

Case Packing Instruction - Case 4 of 4

Top View

Level 1 Level 2 Level 3 Level 4

Front Insert

Shelf

Counter Top

14,14

Assembled

Pedestal

Side

Assembled

Pedestal

Side

Andere Classic Exhibits Inneneinrichtung Handbücher

Classic Exhibits

Classic Exhibits SACAGAWEA DESIGNS VK-1232 Handbuch

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS VK-1214 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1180 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Symphony SYM-408 Handbuch

Classic Exhibits

Classic Exhibits Magellan Designs VK-1091 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1519 Handbuch

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1594 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS VK-1950 Bedienungsanleitung

Classic Exhibits

Classic Exhibits gravitee GK-1012 Handbuch

Classic Exhibits

Classic Exhibits eco systems ECO-2041 Handbuch

Classic Exhibits

Classic Exhibits Perfect 10 Bella Bedienungsanleitung

Classic Exhibits

Classic Exhibits RE-2015 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary VK-2098 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SYMPHONY SYM-408 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-1016 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1235 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Symphony SYM-411 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS 38907 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids LTK-1114 Bedienungsanleitung

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS VK-2959 Handbuch

Classic Exhibits

Classic Exhibits SYMPHONY SYK-2003 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids LTK-1108 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Magellan Designs VK-1063 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary designs VK-2084 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung