Clifford 600UK Betriebsanleitung

Concept 600 Table of Contents

Standard Features of the Concept 600 .......................2

Welcome.......................................3

Maintenance.....................................3

Built-in vehicle recovery/anti-carjacking feature..................4

Enable/disable the anti-carjacking feature ................................4

Your secret disarming code .......................................4

IMPORTANT: What you MUST do to drive your car ............................5

“Guessing” your code won’t help a carjacker ..............................5

How to set your own secret disarming code ...............................5

Your remote controls.................................6

How to use your MASTER remote control .................................7

How to use your COMPANION remote control .............................7

Remotely controlling your Concept 600 .................................7

Quick reference: remote control functions ................................10

ACG 2™ (Anti-CodeGrabbing 2™) ...................................10

Automatic remote control low-battery warning .............................11

Remote control battery replacement ..................................11

Adding new remote controls ......................................11

How to erase the codes of lost or stolen remote controls ........................11

Two-Point Internal AutoImmobilisation ......................12

Wireless FuelGuard Module™...........................12

Engine Restart Feature .........................................12

Automatic Window RollUp .............................13

Automatic Window RollUp Instant Bypass ................................13

AutoArming™ ....................................13

PlainView 2™ Coded Valet Mode..........................14

To enable valet mode..........................................14

Automatic exit of the valet mode.....................................14

Remote controlled valet mode entry and exit ..............................14

Keyless entry in valet mode ......................................14

Digital Tilt/Motion Sensor.............................15

Digital Dual-Zone Proximity Sensor 4 ........................15

Remote controlled override of each Proximity Sensor zone ........................15

False Alarm Prevention & FACT™..........................16

How to interpret the chirps and indicator light flashes ..............16

How to interpret the LED status indicator .....................16

Automatic Battery-Saving Mode ....................................16

Smart AutoTesting™.................................17

Automatic malfunction bypass with AutoReMonitoring™ .........................17

Smart prior intrusion attempt alert .........................17

Multiple-event TotalRecall™............................18

AutoLock and AutoUnLock™ ............................18

Smart boot release option .............................18

SmartPowerUp™ 2 .................................18

Optional CliffNet Wizard™ & DataPort ......................19

Timer options....................................19

Remote controlled timed headlight activation option ..........................19

Smart Self-Powered Medallion Siren with Digital ComLink............20

User-selectable features..............................21

Step-by-step programming instructions .................................21

Table of User-Selectable Features ....................................22

Example................................................23

Reset All Features ...........................................23

Standard Features of the Concept 600

The following are standard features of this system. Some vehicles may require optional par ts/wiring and a few are incompatible with some features.

þThatcham-Evaluatedþ

þLifetime Warranty

þUp-to-£500 theft protection guarantee

þTwo Remote Controls: one master remote, one companion remote

nACG™ 2 (Anti-CodeGrabbing™)

nExtended Range

nAudible Low-Battery Warning

þBuilt-In Two-Point AutoImmobiliser for Failure-Proof Driving Safety

þWireless FuelGuard Module

þPatented PlainView 2™ Coded Valet Mode

nUser-Selectable Remote Valet Mode Entry/Exit

nAutomatic Re-Enabling of Full Security

þDigital Dual-Zone Proximity Sensor 4 with Remote Zone Override

þDigital Tilt/Motion Sensor

þBuilt-In Window RollUp

þBlackJax Anti-Carjacking Electronics

þFACT — False Alarm Control and Test

þOptional DataPort™ Interface to Your Own PC

nPoint-and-Click Feature Programming with SecureAccess

þSmart Self-Powered Medallion Siren with Unbreachable Digital ComLink

nSmart Self-Powered Circuitry with Automatic Low Battery Warning

nDual-Mode “Chirp” Silencing

nQuietChirp™/LoudChirp™

nRemote Siren Silencing

þBuilt-In Door Lock Electronics and Relays

nUser-Selectable Automatic Door Locking/Unlocking

þRemote Panic with Smart Locking/Unlocking

þUser-Selectable AutoArming™

nLock upon AutoArming

nInstant AutoArm Bypass

þSmart Remote Boot Release Capability

þIntegrated Electronic Timer for Optional Remote Headlight Activation

þBuilt-In Indicator Light Flasher with On-Board Relay

þRemote Controlled Courtesy Lighting

þSmart AutoTesting™ with Malfunction AutoBypass™ & AutoReMonitoring

þSmart Prior Intrusion Attempt Alert

þEight-Event TotalRecall™

þHigh-Luminescence LED Status Indicator with Automatic Battery-Saving Mode

þRemote Control Code Learning

þClear All Remotes

þMultiple-Car Control

þSmartPowerUp™ 2

þFull-Time SecureAccess™ Programming

Welcome to the world of

high-technology vehicle security and convenience

Congratulations on the purchase of your Concept 600, and thank you for choosing Clifford

Electronics World-Class Auto Security for your vehicle security needs! Clifford has long

been recognised as the world’s leading manufacturer of high-technology vehicle security

systems and accessories. Buying Clifford products has always meant buying the best, and

nowhere is our commitment to technological innovation, reliability and quality more evident

than in the astounding Concept 600 — our top-of-the-line Thatcham-evaluated model.

Concept 600 is loaded with protective features and convenience benefits, including: Window

RollUp that automatically closes the front two electric windows every time you remotely arm.

The remarkable self-adjusting Digital Tilt/Motion Sensor that detects any attempts to tow the

vehicle or remove its wheels. Our innovative Wireless FuelGuard Module that makes theft by

even the most skilled car thief virtually impossible since there are no wires for the thief to cut

or jump! BlackJax anti-carjacking and vehicle recovery system enhances your personal safety

and virtually assures your vehicle can be promptly recovered intact. Concept 600 also has our

ACG 2™ (Anti-CodeGrabbing) that fights off thieves with code-grabbers (a device similar to

those used to “clone” cellular phones). Clifford’s unique PlainView 2 Coded Valet Switch

ensures no thief, carjacker or joyrider can turn off your Concept 600 like they can with other

car alarm brands. The Smart Self-Powered Medallion Siren with Digital ComLink will detect

any theft-related wire tampering and will continue to sound even if the thief were to cut all

the wires! Our new optional CliffNet Wizard™ PC interface even lets you test and set all the

user-selectable features on your computer screen. Plus there’s remote controlled valet mode,

dual-point immobilisation in addition to the Wireless FuelGuard, an electronic interlock to

prevent accidental activation of the optional remote boot release, smart automatic

locking/unlocking if you ever need to “panic” the system, full-time programming access (even

whilst driving), and much, much more. Yet despite all the sophistication, you will find that

your Concept 600 is amazingly easy to use: never more difficult than a few presses of a button.

NOTE: Your system MUST be installed by an Authorised Clifford Dealer in

accordance with the instructions we supply them. The system is intended for

automobiles with a 12-volt battery and petrol- or diesel-powered engines.

(BlackJax works on electronic petrol-injected vehicles and will work on most

diesel-enginevehicleswiththeadditionofouroptional#60-226adapter).

NOTE: The Installation Certificate document must be completed by your

installer at the Authorised Clifford Dealer. Other than the remote controls,

this system has no user-serviceable parts. Your Authorised Clifford Dealer

can correct any system wiring problems and, if ever needed, can return any

malfunctioning component to Clifford Electronics for repair/replacement

under the terms printed on the supplied warranty card. Any alterations or

additions would automatically invalidate the warranty, antitheft guarantee

(if applicable) and invalidate the Installation Certificate.

Maintenance

Your Concept 600 requires no maintenance except for replacement of remote control

batteries when they reach the end of their useful life; see the Automatic low battery

warningand Remote control battery replacement sections on page 11. This product, like any

electrical device in your vehicle, requires that your vehicle battery be in proper working

order and fully charged. To ensure proper operation, periodically have your vehicle

battery “load-checked” at any local garage/mechanic and ask them to verify that the

charging system (alternator, etc.) is working properly. Also make sure the battery cables

and connections are tight and free from corrosion.

Built-in vehicle recovery/anti-carjacking feature

Concept 600’s built-in BlackJax feature provides a safe and effective means of recovering

your vehicle after a theft or carjacking. In a carjacking situation, the sooner you are out

of the car the better. Don’t resist or take anything with you, just get out and get away.

The instant the car door is opened, your Concept 600 takes charge. First it allows the

carjacker to drive a short distance, ensuring your safety. Then it repeatedly flashes the

brake lights and continuously sounds the siren to caution nearby drivers and draw

attention to your stolen vehicle. Then when the carjacker slows for a turn or traffic, it

safely shuts down the engine and dynamically prevents it from being restarted. The

system will ignore the remote control at this point (since the carjacker most likely took

your remote along with your keys).

Even if the carjacker is familiar with our system, your Concept 600 will assure that he

cannot restart the engine. Unable to do so, and with your stalled vehicle in the middle of

traffic — siren wailing and brake lights flashing — the carjacker has no choice but to

abandon your car. (The same occurs to anyone who steals your parked car from you at a

petrol station or in a car park, which are the most common carjacking sites). To recover

your vehicle, you simply walk a block or two to your car, enter your code, and the system

releases control of the vehicle to you.

VERY IMPORTANT: The factory setting for the anti-carjacking feature is OFF.

Onceyouarefamiliarwiththefollowing,we suggest you turn this feature ON

(see pages 21-22). When anti-carjacking is on, each time you begin driving

you MUST enter your disarming code via the PlainView 2 switch on the

dashboard or console (unless the system is in valet mode). You may turn this

feature on or off at any time.

Your secret disarming code tells the system that the car is being driven by an authorised

person. If you or a passenger opens and closes a car door at any point whilst the engine is

running (as would occur in a carjacking attempt), you must again enter your secret code.

Enable/disable the anti-carjacking feature

You may enable or disable the BlackJax anti-carjacking feature (see User-selectable

features on pages 21-22) or temporarily override it via PlainView 2 Coded Valet Mode

(see page 14).

Your secret disarming code

Unless the BlackJax anti-carjacking feature is turned off or the system is in valet mode

(see page 14), 20 seconds after you switch on the ignition and press the brake (or open

and close a door whilst the engine is running), you must enter your secret disarming code

to let the system know it is you who is driving.

Your system’s factory-set disarming code is noted on the back

cover of this manual.

Definitions

nDigit:A digit is defined as any number from 0 to 9, inclusive.

nDisarming code:A disarming code may be 1 to 4 digits in length, but the first digit

may not be a zero:

A 1-digit code = any number between 1-9

A 2-digit code = any number between 10-99

A 3-digit code = any number between 100-999

A 4-digit code = any number between 1000-9999

nPlainView 2 switch: A two-button switch mounted on the dashboard or console.

One of the buttons is marked with a raised✱, the other is unmarked. Each time you

drive your car, you must enter your secret disarming code via the PlainView 2 switch.

nEntering a digit: To enter a digit, you press and release the ✱button of the

PlainView 2 switch the number of times of the digit to be entered, followed by pressing the

unmarked button. To enter a zero, you simply press and release the unmarked button.

nEntering a code:To enter your code, just repeat the above for each digit of your

code.

EXAMPLE: To enter a code of 1203, you would press and release

the PlainView 2 switch buttons thusly: ✱unmarked, ✱✱ un-

marked, unmarked, ✱✱✱unmarked.

NOTE: You may NOT select a code that begins with a zero. The

first digit of your code must be 1–9.

IMPORTANT: What you MUST do to drive your car

If you have the BlackJax anti-carjacking feature turned on, until you set your own

disarming code, you will use the factory-set code noted on the back cover of this manual.

To drive your car, do the following:

1.Shut all doors, then start the engine.

2.Enter the factory-set disarming code noted on the back cover of this manual using the

Entering a code:information noted above (you may do this whilst driving, if you wish).

The LED will light.

3.The LED will flash on for an instant after entry of the final digit to confirm proper

code entry. You may now drive or continue driving the vehicle.

What you MUST do if you hear 5 siren chirps while driving

If you forget to enter the code, the system will remind you to do so 20 seconds after you

begin driving by “chirping”the siren 5 times and flashing the dashboard LED. At this

point, you have another 20 seconds to enter your code. When entered, the LED will stop

flashing and the siren will chirp once to confirm proper code entry. If the proper code is

notentered within 20 seconds after the 5-chirp signal, the engine will shut down as soon

as you slow for traffic or a turn. You may enter your disarming code even after the engine

is shut down. Once the proper disarming code is entered, you will be able to resume

driving.

“Guessing” your code won’t help a carjacker

What if the carjacker is familiar with Clifford’s patented PlainView 2 coding system and

tries guessing codes at random? No problem. After three incorrect codes are entered, the

system will ignore any further code entries for a short time. So even if the carjacker were

to actually stumble upon your code during this time, he would stillnot be able to silence

your system or restart the engine.

How to set your own secret disarming code

You may choose any 1-, 2-, 3- or 4-digit code, but the first digit must not be a zero (e.g.,

1023 is a valid code, 0123 would not be a valid code). You can also change your code

whenever and wherever you want with the procedure noted on pages 21-22.

continued...

Example

Let’s say you want to set a disarming code of 4301. To do so, you would do the following:

1.From the Table of user-selectable features on page 22, you would note that the Set a

new secret disarming/valet codefeature is in column 2, row 7.

2. Enter program mode by turning on the ignition, entering your current disarming code,

then pressing and holding the PlainView 2✱button for 3 seconds until you hear a chirp.

3.Select column 2 by pressing the unmarked button twice. After a brief pause, you will

hear 2 chirps to confirm that you have selected feature column 2.

4.Within 5 seconds, select row 7 by pressing and releasing the PlainView 2 ✱button 7

times. To help you count, you will hear a chirp each time you press the ✱button. After 7

presses, immediatelypress the unmarked button, then immediatelyenter your new code.

Example: To enter 4301 as your new code, you would press the switch buttons

inthis manner: ✱✱✱✱unmarked, ✱✱✱unmarked, unmarked, ✱unmarked.

5.Wait for the 2-chirp confirmation.

6.Turn off the ignition to exit program mode (you’ll hear a 3-chirp confirmation).

7.VERY IMPORTANT: You must immediately test your new valet code:Turn on

the ignition, enter your new code, then press and hold the unmarked button for 3

seconds. The LED will illuminate to indicate the system is in valet mode (see page 14

for information on valet mode). Turn the ignition off. The system is now in valet mode.

If the LED does not light, the new code you programmed and the one you just

entereddo not match. In such a case, the system reverts to the previous code.

8.Turn the ignition on. The LED will turn off to indicate that the system has exited

valet mode and is now in normal operating mode. You may now turn off the ignition.

Your remote controls

The master remote control and the companion remote control are ultra-sophisticated

miniature radio transmitters powered by a single miniature battery (a 12-volt alkaline for

the master remote control; 3-volt lithium for the companion remote). A weak remote

control battery will reduce range (your Concept 600 system will warn you if the remote

control battery is nearing the end of its useful life, see page 11 for details). Electrical/radio

frequency interference, obstructions, weather conditions and even sunspots can interrupt

the signal from your remote control. If this happens, repeatedly press the remote control

button several times until the system responds (this works better than holding the button).

The remote controls are the keys to your system. But these remote controls are much

more secure than car keys because each incorporates Clifford’s ACG 2™

(Anti-CodeGrabbing 2™) technology with trillions of possible digital codes for the

ultimate protection. You will use your Concept 600 remote control to arm and disarm

the system, lock and unlock the doors, activate/deactivate the panic feature, close the

electric windows, enable/exit valet mode, override one or both Proximity Sensor zones

and command options such as a remote boot release, electric garage door interface and

even remote starting of the engine and heater or air conditioner, among other options.

TIP: If you press the top of the remote to your chin while pressing the button,

you can greatly increase the range since your body acts as a large radio

antenna (this is the same principle as a station coming in more clearly when

you touch the TV or radio antenna).

Your master remote control can command up to 16 different system functions and

options. But instead of putting 16 buttons on the remote control, we made it easy: First,

than the others. Buttons 2, 3 and 4 are the smaller buttons to the right, below and left of

button 1. The LevelShift

nTo transmit either channel 1, 2, 3 or 4:

Just press either button 1, 2, 3 or 4. For instance,

to transmit channel 3, press button 3. Whilst you

transmit, the LED indicator will flash once every

level 1 .

nTo transmit either channel 5, 6, 7 or 8:

Press the LevelShift button once. This shifts

buttons 1-4 to level 2 (channels 5-8). Then press

the desired button within the next 7 seconds. For

instance, to transmit channel 5, press the

LevelShift button once, then press button 1.

Whilst you transmit, you’ll notice that the LED

indicator flashes twice, pauses, flashes twice, etc.: this indicates level 2.

nTo transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This

shifts buttons 1-4 to level 3 (channels 9-12). Then press the corresponding button

within the next 7 seconds. For instance, to transmit channel 10, press the LevelShift

button twice, then press button 2. Whilst you transmit, you’ll notice that the LED

flashes three times, pauses, flashes three times, etc.: this indicateslevel 3.

nTo transmit channel 13, 14, 15 or 16:Press the LevelShift button three times.

This shifts buttons 1-4 to level 4 (channels 13-16). Then press the corresponding

button within the next 7 seconds. For instance, to transmit channel 16, press the LevelShift

button three times, then press button 4. Whilst you transmit, you’ll notice that the

LED flashes four times, pauses, flashes four times, etc.: this indicates level 4.

NOTE: One second after you stop transmitting on level 2, 3 or 4 (channels

5-16), the remote control automatically returns to level 1 (channels 1-4).

How to use your COMPANION remote control

We made controlling basic system functions even easier with the

companion remote control. For example to arm/disarm and

lock/unlock, just press the button with the lock/unlock symbol:

; to activate the remote boot release option, just press the

button with the boot-open symbol: . For less frequently used

features, simultaneously pressing a combination of two buttons (as

specified in the following section) will do the job.

Remotely controlling your Concept 600

Each of your two remote controls can command several different functionsand options.

TO ARM:Press button 1 on the master remote control or button on

the companion remote control. You will hear two chirps and the

indicator lights will flash twice. The dashboard LED will flash

repeatedly, your vehicle’s power locks will automatically lock and

the two windows controlled by the Automatic Window RollUp

feature (see page 13) will close.

TO DISARM:Press button 1 on the master remote control or button on

the companion remote. One chirp and one indicator light flash

confirms disarming. In addition, the doors will automatically unlock,

the LED will turn off and the interior lights will turn on and stay on

for 30 seconds or until you start the engine, whichever occurs first.

TO ARM OR

DISARM SILENTLY: By pressing button 3 on the master remote or pressing both the

buttonand the✱button on the companion remote, you can

arm or disarm your Concept 600 with all the indications previously

noted exceptthe chirps.

TO ACTIVATE

THE PANIC

FEATURE:

For three seconds, continually press button 1 on the master remote

or button on the companion remote. The indicator lights

will flash repeatedly and the siren will blare until you press the

button again to turn it off. If the ignition is on (indicating you are

in the car), the doors will lock to prevent an assailant from

entering (note: some vehicles are unable to lock the doors whilst

the ignition is on). If the ignition is off, the doors will unlock,

allowing you to enter immediately without fumbling with your keys.

TO REMOTELY

OPEN THE BOOT: If you have the remote boot release option, pressing button 2 on

the master remote or button on the companion remote

whilst the system is disarmed will release the boot latch (see Smart

boot release option on page 18 for more information). If you do not

have the boot release option, you may assign this button to activate

one of the other functions noted in column 4 of the Table of

User-Selectable Featureson page 22, or it can be programmedinto a

Clifford ACG 2 electric garage door/entry gate opener interface or

a Concept 100, 300, 400 or 600 system on your other vehicle.

TO REMOTELY

START THE ENGINE:Button 4 on the master remote or button ✱on the companion

remote is factory-set to activate the IntelliStart 4* remote engine

starting accessory. If you do not have this option, you may assign

this button to activate one of the other functions noted in column

4 of theTable of User-Selectable Featureson page 22, or it can be

programmed into a Clifford ACG 2 electric garage door/entrygate

opener interface or a Concept 100, 300, 400 or 600 system on

your other vehicle.

TO ACTIVATE THE

TIMED HEADLIGHTS:If you have this option, channel 7 (LevelShift button once, then

button 3) on the master remote or button on the companion

remote will turn on the headlights for any duration you wish

between one second and 4 minutes (the factorysetting is 10

seconds; see User-selectable features on pages 21-22). If you do not

have this option, you may assign this button to activate one of the

other functions noted in column 4 of theTable of User-Selectable

Features on page 22, or it can be programmed into a Clifford ACG 2

electric garage door/entrygate opener interface or a Concept 100,

300, 400 or 600 system on your other vehicle.

8* This feature/accessory is not evaluated by Thatcham.

REV C UPDATE PAGE: ONLY PAGES 8, 9, 10, 19 and

the back cover change, all other pages same as REV B.

TO REMOTELY

ENABLE OR EXIT

VALET MODE:

Channel 9 (LevelShift button twice, then button 1) on the master

remote or simultaneously pressing buttons and✱on the

companion remote is factory-set to enable/exit your Concept

600’s valet mode (see page 14 for details on valet mode). Two

indicator light flashes confirm remote enabled valet mode entry, a

single flash confirms valet mode exit. If you prefer, you may turn

off remote controlled valet mode as noted in the User-selectable

featuressection on pages 21-22 so that the system cannot be

placed in valet mode via the remote controls.

TO REMOTELY

VENT OR OPEN

THE WINDOWS:

If you have the SmartWindows 4 option, channel 6 (LevelShift

button once, then button 2) on the master remote or

simultaneously pressing buttons andon the companion

remote is factory-set to fully open the electric windows if the

system is disarmed. If the system is in its armed state when you

press this channel or button combination, SmartWindows 4 will

vent the windows slightly for ventilation on hot days. Please note

that one SmartWindows 4 module will control two electric

windows, while the system’s built-in Window RollUp electronics

will control two others. Windows controlled by the system’s

Window RollUp electronics cannot be remotely opened or

vented, only those controlled by the SmartWindows 4 option.

SmartWindows 4 is not compatible with some vehicles.

TO REMOTELY

TURN SPEECH

ON OR OFF:

If you have the IntelliVoice 4 speech synthesis option, channel 8

(LevelShift button once, then button 4) on the master remote or

simultaneously pressing buttons andon the companion

remote control will toggle the voice acknowledgments on/off (i.e.,

change thesystem’s arm/disarm confirmations from 2 chirps/1

chirp to verbal “ARMED”/“DISARMED” confirmations and

vice-versa).

TO REMOTELY

OVERRIDE

PROXIMITY

SENSOR ZONES

Channel 10 (LevelShift button twice, then button 2) on the

master remote control or simultaneously pressing buttons

andon the companion remote anytime after arming will

override the warning zone of the system’s Dual-Zone Proximity

Sensor 4. A second press will override bothzones (see Remote

controlled override of each Proximity Sensor zone on page 15).

OTHER FEATURES

AND OPTIONS Other features and options can be accessed from the companion

remote control and/or master remote control as noted in the chart

that follows:

REV C UPDATE PAGE: ONLY PAGES 8, 9, 10, 19 and

the back cover change, all other pages same as REV B.

QUICK REFERENCE: REMOTE CONTROL FUNCTIONS

FunctionCompanion

Remote

Button(s)

Master Remote

LevelShift? Button

Arm or disarm and lock or unlock the doorsno 1

Optional wired accessory #1 (usually remote boot release)*no 2

Silentlyarm or disarm and lock or unlock the doors+ ✱no 3

Unassigned or IntelliStart 4** accessory engine start/stop* ✱no 4

Unassigned*+ ✱1 time1

Unassigned or SmartWindows 4 accessory full open or vent* + 1 time2

Optional wired accessory #2 (usually headlight activation)*1 time 3

Optional wired accessory #3

(usually IntelliVoice 4 accessory speech on/off)*+ 1 time4

Remote valet mode entry/exit (see page 14)+✱2 times1

Remote Proximity Sensor zone override (see page 15) + 2 times2

Unassigned or IntelliStart 4** LowBattery/LowTemp AutoStart as well as

standard transmission SafeStart (see IntelliStart 4 manual) 2 times 3

Unassigned* 2 times4

Unassigned* 3 times1

Unassigned* 3 times2

* These buttons can be assigned to control Concept 100, 300, 400 or 600 systems and accessories on your other vehicles.

** This feature/accessory is not evaluated by Thatcham.

ACG 2™ (Anti-CodeGrabbing 2™)

ACG 2 protects you and your automobile from the most effective and onerous car

stealing device ever used by car thieves — a code-grabber.

Code-grabbers literally record, from hundreds of feet away, the code sent by your car

alarm remote control (code-grabbers are very similar to, but simpler than, cellphone

“cloning” devices). The thief then simply plays back the code when you’re gone, instantly

disarming the alarm and unlocking the doors. It’s like leaving your keys and remote on

the bonnet.

Many alarms can be defeated that easily, and some of the latest “smart”code-grabbers

can even decipher the code hopping/jumping sequence used by other car alarm

manufacturers. In contrast, Clifford Concept 100, 300, 400 or 600 systems use complex

digital signal processing and unbreachable code encryption to randomly change the

digital code every time you use the remote control. Your remote controls will never

transmit the same code twice, and the control unit will never accept the same remote

control code twice. Thus the code recorded and played back by the thief’s code-grabber

— even the latest generation smart code-grabbers — will never be accepted by your

Concept 600 system.

REV C UPDATE PAGE: ONLY PAGES 8, 9, 10, 19 and

the back cover change, all other pages same as REV B.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clifford Autoalarmanlage Handbücher

Clifford

Clifford 3105X Bedienungsanleitung

Clifford

Clifford 10.5X Bedienungsanleitung

Clifford

Clifford ACE 4000 Bedienungsanleitung

Clifford

Clifford Matrix RSIII Bedienungsanleitung

Clifford

Clifford 570.4X Bedienungsanleitung

Clifford

Clifford Nova III Bedienungsanleitung

Clifford

Clifford Tazor II Bedienungsanleitung

Clifford

Clifford 590.4X Bedienungsanleitung

Clifford

Clifford Concept 100 Bedienungsanleitung

Clifford

Clifford G4 System Series Bedienungsanleitung

Clifford

Clifford 300UK Betriebsanleitung

Clifford

Clifford 4115X Bedienungsanleitung

Clifford

Clifford Concept 450 Bedienungsanleitung

Clifford

Clifford Concept 40 Bedienungsanleitung

Clifford

Clifford intelliGuard 750 Bedienungsanleitung

Clifford

Clifford Intelliguard Millenia Bedienungsanleitung

Clifford

Clifford Cyber 4 Bedienungsanleitung

Clifford

Clifford Bullet 2 Bedienungsanleitung

Clifford

Clifford Auto Immobilizer Bedienungsanleitung

Clifford

Clifford Tazor 4 Bedienungsanleitung

Clifford

Clifford Centurion Bedienungsanleitung

Clifford

Clifford RSX3.2 Bedienungsanleitung

Clifford

Clifford Level Four Bedienungsanleitung

Clifford

Clifford IntelliGuard 8000 Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

SECO-LARM

SECO-LARM 300C Bedienungsanleitung

Python

Python 660XP Bedienungsanleitung

Megalarm

Megalarm MEGA 3600 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2011RS Series III Super Rage Bedienungsanleitung