Clifford Bullet 2 Bedienungsanleitung

Owner’sManual

World-ClassAutoSecurity TM

bULLET

Table of Contents

Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Using Your Bullet Security System . . . . . . . . . . . . . . . . . . . . . . . . 3

Premier™ 4-Button/8-Channel Remote Controls . . . . . . . . . . . . . . . 3

How to Interpret the Chirps and Parking Light Flashes . . . . . . . . . . . 4

How to Interpret the LED Status Indicator . . . . . . . . . . . . . . . . . . 4

Headlight Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Secured Valet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

To turn ON the valet mode: . . . . . . . . . . . . . . . . . . . . . . . . . 5

To turn OFF the valet mode: . . . . . . . . . . . . . . . . . . . . . . . . 5

Keyless Entry in Valet Mode: . . . . . . . . . . . . . . . . . . . . . . . . 5

Enhanced AutoArming™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

AutoArming Enable/Disable: . . . . . . . . . . . . . . . . . . . . . . . . 5

Visual Acknowledgment: . . . . . . . . . . . . . . . . . . . . . . . . . . 5

AutoArm & Lock: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Specific Malfunction Identification . . . . . . . . . . . . . . . . . . . . . 6

Automatic Malfunction Bypass . . . . . . . . . . . . . . . . . . . . . . . . 6

TotalRecall™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

FACT™— False Alarm Control and Test . . . . . . . . . . . . . . . . . . . . 7

Tampering Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Smart Prior Intrusion Attempt Alert . . . . . . . . . . . . . . . . . . . . . . 7

AutoLock/AutoUnLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Siren Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

AntiScan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Automatic Starter Interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Multi-Level Chirp Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chirp Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Extended Chirp Silencing . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Short-Term Chirp Muting . . . . . . . . . . . . . . . . . . . . . . . . . . 8

One-Time Remote Chirp Muting . . . . . . . . . . . . . . . . . . . . . . 8

Remote Headlight Activation OR Window/Sunroof Closure . . . . . . . . . 8

User-Selectable Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

User-Programmable Remote Controls . . . . . . . . . . . . . . . . . . . 11

To Erase Unwanted Remote Control Codes . . . . . . . . . . . . . . . . 11

Standard Features

●FACT™ — False Alarm Control and Test — eliminates recurring false alarms

●Lifetime Warranty

●$3,OOO Theft Protection Guarantee (see guarantee card for details)

●A pair of Premier™ 4-Button/8-Channel Remote Controls with more than 4 billion

digital codes

●AntiScan™ — blocks electronic scanners from disarming the alarm

●Multiple-Car Control — allows you to command several alarms with the same remote

●MultiRemote™ Recognition — useful for other drivers, since the system will ac-

cept up to 4 Clifford remote controls of any types or codes

●Smart Trunk Release Capability — electronic interlock ensures that the trunk can

be remotely opened only when the alarm is disarmed

●Remote Headlight Activation Capability — illuminates your way safely to or from

your car

●Remote Window and Sunroof Closure Capability* — remotely close the windows

●SoftChirps™ — select from soft or full volume arm/disarm chirping

●Triple-Mode Chirp Silencing

Long-Term Chirp Silencing

One-Cycle Chirp Muting

Remote Controlled Chirp Muting

●SmartDoors™

Remote Door Locking/Unlocking — lock/unlock the car doors with the remote control

AutoLock™ — automatically locks the doors when the engine is started

AutoUnLock™ — automatically unlocks the doors when the ignition is turned “off”

Keyless Entry in Valet Mode — allows for remote door locking/unlocking even in valet mode

●Built-In Parking Light Flasher — visually confirms alarm status from a distance

●Headlight Reminder When Ignition is Turned Off — you’ll never again leave the

headlights on

●Smart AutoTesting™ — automatically tests for any malfunction

●Malfunction AutoBypass™ — will advise you of any malfunction, then bypasses it

●TotalRecall™ — stores identity of any trigger or sensor activated

●Enhanced AutoArming™

AutoArming Enable/Disable — allows you to enable or disable AutoArming any time

Visual Parking Light Acknowledgment — visually confirms AutoArming

User-Selectable AutoArm & Lock — allows you to select whether the doors will lock when the

system is automatically armed

●Dual-Level Tampering Warnings — for maximum protection and minimum nuisance

●Smart Prior Intrusion Attempt Alert — identifies attempted intrusion point

●High-Output Six-Sound Siren — 125dB siren with six different alarm sound patterns

●Fault-Proof Starter Interrupt — immobilizes the vehicle while the system is armed

●LED Status Indicator — provides visual confirmation of alarm status

●Magnetic Resonance Sensor™ — the best vibration/impact sensor

●Remote Panic Feature — for your own personal safety even away from the car

●Hood/Trunk Trigger Input — to provide total perimeter protection

●Secured Valet Mode — bypass alarm when car is valet parked or serviced

*On various models of BMW, Jaguar, Mercedes Benz and Volkswagen.

Using Your Bullet Security System

Premier™ 4-Button/8-Channel Remote Controls

The Premier 4-button/8-channel remote control is a miniature radio transmitter with

a range of up to 100 feet. Obstructions, interference or a weak battery will reduce the

range. Your remote control is the key to your security system. You will use it to

arm or disarm the system, lock or unlock the doors, activate its panic feature or

control options such as a remote trunk release or IntelliStart™ remote engine starter.

With the red switch in the UP position, buttons I-IV transmit channels 1-4; in the

DOWN position, they transmit channels 5-8. These additional channels can be used to

control Clifford systems and accessories on your other vehicle(s).

TO ARM

THE SYSTEM. . . . . . Press button I once. You will hear two chirps and the parking

lights will flash twice. The dashboard LED will flash repeat-

edly and the car doors will automatically lock. Any attempt to

break into the vehicle will immediately disable the starter,

sound the six-sound siren and flash the parking lights.

TO DISARM

THE SYSTEM. . . . . . Press button I again. One chirp and one flash of the parking

lights will confirm disarming. In addition, the car doors will

automatically unlock and the interior lights will turn on and

stay on for 30 seconds or until you start the engine.

TO SILENTLY

ARM OR DISARM

THE SYSTEM. . . . . .

Press button III. The system will arm or disarm with all the in-

dications noted above except the chirp acknowledgments.

TO ACTIVATE

THE PANIC

FEATURE. . . . . . . . .

Press button I for 3 seconds. The lights will flash repeatedly

and the six-sound siren will blare for 30 or 60 seconds (user-

selectable), or until you press button I again to turn it off.

TO ACTIVATE AN

OPTION WHEN

THE ALARM IS

ARMED . . . . . . . . . .

Button II controls an electronic interlock that allows you to

separately command two different options: one when your sys-

tem is armed and another when it is disarmed. For instance,

pressing button II while the alarm is armed will either:

★Turn on the headlights for any duration between 1 second and 2.5 minutes (fac-

tory setting is 30 seconds; to change duration, see pages 9-10) OR . . .

★Fully close all the power windows and sunroof on various vehicle makes, includ-

ing certain Jaguar, BMW, Mercedes Benz and Volkswagen vehicles.

TO ACTIVATE AN

OPTION WHEN

THE ALARM IS

DISARMED . . . . . . .

As noted on the previous page, button II can control yet an-

other option when the system is disarmed. If you have one of

the following options installed, pressing button II while the

alarm is disarmed will either:

★Remotely open the trunk OR . . .

★Remotely open the fuel-filler door.

TO ACTIVATE AN

OPTION

REGARDLESS OF

ALARM STATE . . . . .

Button IV and channels 5-8 (red switch down) can activate other

options, such as ta remote engine starter accessory, electric ga-

rage door or one or more other Clifford-equipped vehicle(s).

How to Interpret the Chirps and Parking Light Flashes

When you press the remote control buttons, the system will respond with chirps (unless

you have the chirp muting feature turned on) and flashes the parking lights to indicate

the system status. The meaning of these chirp/flash acknowledgments is as follows:

Chirps and flashes Meaning

1Alarm is disarmed

2Alarm is armed

2 and then 4 Armed and there is a sensor malfunction (seeSmart AutoTesting)

3Alarm is disarmed and there was an intrusion attempt (see Smart Prior Intrusion Attempt)

4Armed and there is a trigger malfunction (see Smart AutoTesting)

How to Interpret the LED Status Indicator

The LED on your car’s dashboard or console will inform you of the system status:

LED Condition Meaning

Off System is disarmed

On Secured valet mode

Flashing System is armed

Pause between flashes Either a malfunction or an intrusion was attempted

Headlight Reminder

If you turn the ignition off and open your door without having turned off the

headlights, you will be reminded to turn them off with four chirps. (Since this is a

warning, you will hear the chirps even if you have the chirp muting feature turned

on.) If you prefer, you may turn off the Headlight Reminder feature. See the

User-Selectable Features section on pages 9-10.

Secured Valet Mode

Whenever the alarm is put in secured valet mode, all of the alarm functions are

bypassed since it prevents AutoArming and accidental activation of the alarm.

You should use the valet mode whenever your car is either to be serviced by

mechanics, handed over to car wash personnel or driven by valet attendants. It

also comes in handy if you ever lose your remote control or its battery dies. If you

have the AutoArming feature set on, when fueling your car, either put the alarm in

valet mode or leave the driver’s door open (the system will not AutoArm if a door

is open). Be sure to ask your installer to show you where the valet switch is

located.

To turn ON the valet mode:

1. Insert your ignition key and turn it to the “ON” position, or start the engine.

2. Flip the valet switch.

3. The LED will glow continuously to indicate that the alarm is in valet mode.

To turn OFF the valet mode:

1. Insert your ignition key and turn it to the “ON” position, or start the engine.

2. Flip the valet switch.

3. The LED will turn off to indicate that the alarm is in normal operating mode.

Keyless Entry in Valet Mode: Even if valet mode “on”, you will still be able

to remotely control all the convenience features. For instance, simply press but-

ton I as if you were arming or disarming and your car’s doors will lock or un-

lock. You can also use buttons II and IV to activate other options.

Enhanced AutoArming™

If you forget to remotely arm the system, it will arm itself automatically (“passively”)

30 seconds after the vehicle doors are closed. If you re-open any door(s) within the

30-second countdown, AutoArming will restart from the beginning once all doors

are closed. This ensures you’ll never accidentally leave your vehicle unprotected.

Bullet includes all these Enhanced AutoArming features:

AutoArming Enable/Disable:If you prefer, you may deactivate or reactivate

AutoArming. To do, see User-Selectable Features on pages 9-10.

Visual Acknowledgment: Five seconds after you exit the vehicle and close

all the doors, the parking lights will flash twice to confirm that the AutoArming

countdown is progressing. Then, 25 seconds later, the system will AutoArm.

AutoArm & Lock: To ensure you can’t accidentally lock your keys inside the

car, the system is factory-set not to lock the doors upon AutoArming. To

change this setting, see User-Selectable Features on pages 9-10.

NOTE: To prevent AutoArming of the system when fueling the vehicle, either

enable valet mode or leave one of the doors open (the system AutoArms 30

seconds after all doors are closed).

Smart AutoTesting™

Each time you remotely arm your vehicle, it will perform a series of tests on all

triggers and sensors. If a trigger malfunction is found, you will be visually and

audibly alerted immediately with 4 chirps and flashes instead of the usual 2. If a

sensor is malfunctioning, you will receive the usual 2 chirps and flashes, then, a

few seconds later, there will be 4 chirps and flashes.

Specific Malfunction Identification: The system not only tells you if the prob-

lem is a trigger or sensor, but it can also indicate the specific trigger or sensor

that is malfunctioning. This feature saves you time and money since your in-

staller won’t have to spend hours trying to determine where the problem is.

Here’s how it works:

1. You receive the 4-chirp/4-flash signal upon remote disarming.

2. The LED indicator inside the vehicle will be flashing, pause, then repeat.

3. Count the number of blinks in one cycle between pauses (for your conven-

ience, the blink cycle repeats 5 times) and refer to the chart below:

Number of LED blinks between pauses Malfunction

1 blink Vibration/impact sensor or optional sensor

2 blinks Door trigger

3 blinks Trunk or hood trigger

Automatic Malfunction Bypass

To provide the utmost protection even if a system component malfunctions, the

system will automatically bypass the faulty point and arm all other triggers and

sensors until you can have the system serviced by your local Authorized Dealer.

TotalRecall™

The system’s non-volatile memory records the identity of the last activated or

malfunctioning trigger or sensor, which allows your installer to instantly track down a

malfunction and save you servicing costs. To identify the trigger or sensor held in

the system’s non-volatile memory, simply perform the following procedure:

1. With the ignition OFF, flick the valet switch to one side.

2. Press button I to “arm” the system, then again to “disarm.”

3. The LED will blink several times, pause, then repeat the blink cycle 4 times.

4. Count the number of blinks in one cycle and refer to the chart that follows:

Number of LED blinks per cycle Trigger/Sensor that Last Activated or Malfunctioned

1 blink Magnetic Resonance Sensor

2 blinks Door trigger

3 blinks Trunk or hood trigger

FACT™— False Alarm Control and Test

With FACT, you’ll never experience repeated false alarms. If your six-sound siren

goes off, DO NOT remotely disarm the system while the siren sounds; allow it to

run for the full siren duration. Before sounding the siren a second time, the system

automatically checks for another activated trigger. Should the siren sound again,

you will know for sure that someone is tampering with your vehicle. (To disable

FACT, see User-Selectable Features on pages 9-10.)

Dual-Mode Tampering Warning

Normally, the system immediately sounds its six-sound siren at the first inkling of

an intrusion attempt. However, you may set the system to issue a rapid five-chirp

warning whenever the system detects tampering to the exterior of your vehicle. If

there is any further tampering within the next 30 seconds, or if a door, the hood or

trunk is opened at any time, your system will sound a continuous 125dB

six-sound siren blast. To select the mode of your choice, see User-Selectable

Features on pages 9-10.

NOTE:Turning on the Tampering Warning feature overrides the FACT fea-

ture, and vice-versa.

Smart Prior Intrusion Attempt Alert

When you remotely disarm, if you hear 3 chirps instead of the usual one chirp it

means that a trigger or sensor was activated in your absence. When you enter the

vehicle, the LED will blink several times, pause, then repeat the blink cycle 4

more times. Count the number of blinks in one cycle and refer to the chart below:

Number of LED blinks per cycle after disarming Trigger/Sensor Activated

1 blink Magnetic Resonance Sensor

2 blinks Door trigger

3 blinks Trunk or hood trigger

AutoLock/AutoUnLock

For your safety and that of your passengers, the system automatically locks the doors

when you turn on the ignition switch to start the engine and unlocks them once the

ignition is turned off. If you prefer, you may turn off the AutoLock/AutoUnLock

feature. See the User-Selectable Features section on pages 9-10.

Siren Duration

When the system detects an intrusion attempt, the alarm is set to sound for 30

seconds. However, if you prefer, you may change it to 60 seconds. See the

User-Selectable Features section on pages 9-10.

AntiScan

Car thieves use electronic scanners that rapidly transmit one remote control code

after another to defeat ordinary alarms. AntiScan prevents scanners from

disarming your system.

Automatic Fault-Proof Starter Interrupt

The system automatically prevents engine starting while the system is armed but

allows you to start it even in the unlikely event of a full system failure (other

manufacturer’s alarms may leave you stranded).

Multi-Level Chirp Control

Whenever you wish, you may lower the volume or completely silence the system’s

arm/disarm chirps. The short-term and one-time chirp muting capabilities are

especially valuable when parking late at night in a quiet residential area. You have

several choices:

Chirp Volume Control: Lets you lower the volume of the chirps or restore

them to full volume. See User-Selectable Features on pages 9-10.

Extended Chirp Silencing: Lets you completely silence the chirps until you

wish to restore them. See User-Selectable Features on pages 9-10.

Short-Term Chirp Muting: Lets you silence the chirps for a single arm-and-

disarm cycle. To enable short-term chirp muting, simply turn the vehicle’s igni-

tion switch rapidly ON then OFF. The next time you arm and later disarm the

system, there will be no chirps. After which, the chirps are restored.

One-Time Remote Chirp Muting: The most simple of all. To remotely arm or

disarm the alarm silently, press button III on the remote control.

Remote Headlight Activation OR Window/Sunroof Closure

The system’s built-in timer can control one of two great features when the system

is in its armed state (these features require optional wiring):

★Remote Controlled Headlight Activation OR

★Remote Controlled Window/Sunroof Closure (available only on certain vehicles)

Please see page 4: “To Activate an Option when the Alarm is Armed.” If connected

to the headlights, you may set the timer duration to any interval between 1 second and

2.5 minutes. See the User-Selectable Features section on pages 9-10.

WARNING: If your built-in timer controls window/sunroof closure in your car

DO NOT change the timer setting! This requires installer-only programming.

Changing the value will adversely effect operation and may cause damage.

User-Selectable Features

Your Bullet vehicle security system allows you to set many of its features to your

own personal preferences. We have made the programming procedures very

simple: to make a change, you just flick the valet switch a few times.

The system comes from the factory with all of its features pre-programmed as noted

in the table below and on page 10. To change any of the settings, use the

procedure noted. To restore the feature to its factory setting, just repeat the

procedure:

1. Select the feature you wish to program from the table on the following

pages. Note the number of flicks and chirps associated with that feature.

2. Insert your ignition key and turn it to the “ON” position.

3. Immediately flick the valet switch back and forth, counting the number of

chirps you hear. Stop when you reach the appropriate number of chirps

4. If noted, do the “secondary action.”

5. You will hear one or more chirps (as noted in the “program completion con-

firmation" section) to confirm that you have changed the feature setting.

Turn the ignition off.

6. Repeat steps 1-5 for any other features you wish to program.

Programming Table for User-Selectable Features

Feature Factory

setting

# of

flicks &

chirps

Secondary

action

Program

completion

confirmation Result

AutoArming ON 4—1 chirp 3

seconds after

last step

Change state from

ON to OFF or vice-versa

AutoArm

& Lock OFF 5—1 chirp 3

seconds after

last step

Change state from

ON to OFF or vice-versa

Arm/Disarm

Chirp Confir-

mation ON 6—1 chirp 3

seconds after

last step

Change state from

ON to OFF or vice-versa

Chirp

Volume Full

Volume 7—1 chirp 3

seconds after

last step

Changes state from

LOUD to SOFT volume or

vice-versa

Headlights

On Reminder ON 8—1 chirp 3

seconds after

last step

Change state from

ON to OFF or vice-versa

AutoLock/

AutoUnLock ON 9—1 chirp 3

seconds after

last step

Change state from

ON to OFF or vice-versa

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clifford Autoalarmanlage Handbücher

Clifford

Clifford Nova 3 Bedienungsanleitung

Clifford

Clifford Novell Bedienungsanleitung

Clifford

Clifford Concept 400 Bedienungsanleitung

Clifford

Clifford GP500 Bedienungsanleitung

Clifford

Clifford 3105X Bedienungsanleitung

Clifford

Clifford SuperNova Auto Security SuperNova Bedienungsanleitung

Clifford

Clifford 4706X Responder LC3 Bedienungsanleitung

Clifford

Clifford Sabre Bedienungsanleitung

Clifford

Clifford Ultramax XL-4500 Bedienungsanleitung

Clifford

Clifford Arrow 5.1 Bedienungsanleitung

Clifford

Clifford IntelliGuard 6000 Bedienungsanleitung

Clifford

Clifford 510.4X Bedienungsanleitung

Clifford

Clifford Centurion Bedienungsanleitung

Clifford

Clifford Concept 600 Bedienungsanleitung

Clifford

Clifford Level Four Bedienungsanleitung

Clifford

Clifford Wallet Card L1 Bedienungsanleitung

Clifford

Clifford Matrix 1 Bedienungsanleitung

Clifford

Clifford SOLARIS 5 Bedienungsanleitung

Clifford

Clifford AvantGuard 4 Bedienungsanleitung

Clifford

Clifford 420.4X Bedienungsanleitung

Clifford

Clifford SmartWindows 4 Bedienungsanleitung

Clifford

Clifford intelliguard 900-IQ Bedienungsanleitung

Clifford

Clifford RSX3.2 Bedienungsanleitung

Clifford

Clifford Intelliguard Millenia Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

SECO-LARM

SECO-LARM 300C Bedienungsanleitung

Python

Python 660XP Bedienungsanleitung

Megalarm

Megalarm MEGA 3600 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2011RS Series III Super Rage Bedienungsanleitung