Cognex DataMan 503 Bedienungsanleitung

DataMan®503

Quick Reference Guide

2021 May 26

Revision: 6.1.10-SR1.3

Precautions

To reduce the risk of injury or equipment damage, observe the following precautions

when you install the Cognex product:

lRoute cables and wires away from high-current wiring or high-voltage

power sources to reduce the risk of damage or malfunction from the

following causes: over-voltage, line noise, electrostatic discharge (ESD),

power surges, or other irregularities in the power supply.

lChanges or modifications not expressly approved by the party responsible

for regulatory compliance could void the user’s authority to operate the

equipment.

lEnsure that the cable bend radius begins at least six inches from the

connector. Cable shielding can be degraded or cables can be damaged or

wear out faster if a service loop or bend radius is tighter than 10X the cable

diameter.

lThisdevice should be used in accordance with the instructions in this

manual.

lAll specifications are for reference purposes only and can change without

notice.

lThis product is intended for industrial use in automated manufacturing or

similar applications.

lThe safety of any system incorporating this product is the responsibility of

the assembler of the system.

lThisproduct does not contain user-serviceable parts. Do not make

electrical or mechanical modifications to product components.

Unauthorized modifications can void your warranty.

Product Overview

1 External illumination mounting point

2 Mounting holes (M3 x 5mm)

3 Trigger button

4 Power

5 Train status

6 Good/bad read

7 Network

8 Error

9 Tuning button

10 Peak meter

11 Synchronized Acquisition

12 RS-232

13 External light control

14 Ethernet

15 Power I/O

DataMan 503 Accessories

16 mm, 25 mm and 35 mm lens (LEC-CFFxx-F8)

(xx specifies focal length)

Connection cable 24V, I/O (CCBL-05-01)

Ethernet M12 to RJ45 cable (CCB-84901-y00x-xx) (y straight/angled, x-xx

specifies length)

External light cable (CCB-M12x4MS-xxx) (xxx specifies length)

Only compatible with CLRR / CLRB / CLRO / CLRS / CLRD illumination

External light control cable for DataMan, 5 meters in length with flying leads (CCB-

M12XFLY-05)

Bar light cable (xxx specifies length:300, 500, 1000, 2000 mm)(IVSL-5PM12-

Jxxx)

Compatible with IVSL lights, except IVSL-LX280

I/O extension cable, 5m straight (CKR-200-CBL-EXT)

Power cable for multiple bar lights (use in combination with IVSL-5PM12-5) (CCB-

FOV25-MAL-012)

RS-232 M8 to SUB-D cable (CCB-M8X4-xx)

Synchronization Cable (DM503-SYNC-012 - 1.2 meter, DM503-SYNC-05 - 5

meter)

Xpand 15 (DMA-FOVE-15)

Xpand 25 (DMA-FOVE-25)

SVL Light Bar (IVSL-YLW300-xxx)

Bar light, blue (IVSL-LX520-470)

Bar light, red (IVSL-LX520-650)

DM503 high power illumination (DM503-HPIA-xxx)

Dimensions

Field of View and Reading Distances

16 mm lens for 1D codes (green) 25 mm lens for 1D codes(blue) 35 mm lens for 1D codes (red)

Device Distances in mm/1D min. code

16 mm lens

Distances in mm/1D min. code

25 mm lens

Distances in mm/1D min. code

35 mm lens

DM503 500 5 MIL 790 5 MIL 1100 5 MIL

980 10 MIL 1530 10 MIL

1270 13 MIL 1990 13 MIL

1460 15 MIL

16 mm lens for 1D codes (green) 25 mm lens for 1D codes(blue) 35 mm lens for 1D codes (red)

Device Distances in mm/1D min. code

16 mm lens

Distances in mm/1D min. code

25 mm lens

Distances in mm/1D min. code

35 mm lens

DM503 250 5 MIL 400 5 MIL 460 5 MIL

480 10 MIL 750 10 MIL 1070 10 MIL

620 13 MIL 970 13 MIL 1380 13 MIL

710 15 MIL 1120 15 MIL 1580 15 MIL

Connecting the Reader

Perform the following steps:

1. Mount the reader.

2. Connect the Ethernet cable to a computer or a switch.

3. Connect the breakout cable.

Andere Handbücher für DataMan 503

Inhaltsverzeichnis

Andere Cognex Barcode-Lesegerät Handbücher

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Cognex

Cognex DataMan 260 Bedienungsanleitung

Cognex

Cognex DataMan DM474 Bedienungsanleitung

Cognex

Cognex DataMan 260 Series Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 Verifier Bedienungsanleitung

Cognex

Cognex DataMan Administratorhandbuch

Cognex

Cognex DataMan 7550 Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 380 Series Bedienungsanleitung

Cognex

Cognex DataMan 50 Bedienungsanleitung

Cognex

Cognex DataMan 60 Series Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 DL Bedienungsanleitung

Cognex

Cognex DataMan 150 Bedienungsanleitung

Cognex

Cognex DataMan 280 Series Bedienungsanleitung

Cognex

Cognex DataMan 8600 Verifier Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 ER Bedienungsanleitung

Cognex

Cognex DataMan 8000 Series Bedienungsanleitung

Cognex

Cognex DataMan 50 Series Bedienungsanleitung

Cognex

Cognex DataMan 475 Bedienungsanleitung

Cognex

Cognex DataMan 8000 Series Bedienungsanleitung

Cognex

Cognex DataMan 8700 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung