Cognex DataMan 100 Bedienungsanleitung
COGNEX®
DataMan™ 100
Quick Reference Guide
2
1
1
2
3
4
5
Getting Started
Setting up your DataMan
Connect your DataMan
Using your Dataman
Product contents • Accessories • Mechanical specications •
Product features • Software Installation Page 2
Page 8
Page 14
Page 18
Setting the DataMan focus position • Working distance (scan
maps) • Mounting options and guidelines
Connection types • Wiring discrete inputs • Wiring discrete
outputs • Examples
Trigger types • Training • Using the Setup Tool
Reference Information Page 24
Specications • Precautions • Support Information
2
3
COGNEX
DO NOT HOT PLUG
DM100 IOBOX
IOB10 200-3001-R1R
RS232 USB24VDC
— +
OUTPUT
0 1 C 0 1 C
INPUT
DataMan 100 Systems
DataMan 100 with IDQuick
(DMR-100Q-00)
DataMan 100 Accessories
CD-ROM (Setup Tool and Drivers)
(206-6400-220)
Quick Reference Guide
(590-7013)
DataMan I/O Module
(DM100-IOBOX-000)
Mounting bracket
(DM100-UBRK-000)
RS-232 adapter cable with power tap
(DM100-RS232-000)
Power supply
(DM100-PWR-000)
USB adapter cable with power tap (DM100-
USB-000)
DataMan 100 with IDMax
(DMR-100X-00)
Basic Accessory Kit (DM100-BAK-000)
4
5
37
19.5
55
22.1
22.7
43.5
42
DataMan 100 Product Overview
Aiming LED
Illumination LED
Mounting holes
(M3 x 3.5)•
Status LED
Red: no read
Green: read
•
•
Pushbutton
Push to read
Push and hold 3 seconds to train
•
•
System LED
Green: Trained
Yellow: Untrained
Steady: System
OK
Slow blink:
Connected to setup
tool
Fast blink: Data
transfer
•
•
•
•
•
6
7
Install DataMan 100 Software
Make sure your PC meets these system requirements:
Microsoft® Windows XP
Pentium CPU 500 MHz or faster
.NET 1.1 SP1 (installed automatically)
Insert CD-ROM and follow the on-screen prompts.
Connect the DataMan 100 to your PC using the supplied USB cable.
Launch the Setup Tool. Select the Connect to Reader step, then
click Scan Ports. Make sure a port that says (DM100) is selected,
then click Connect.
1.
•
•
•
2.
3.
4.
Reading your First Code
The DataMan 100 is pre-congured for Manual triggering and symbology
discrimination. To verify that your reader is operational, click on the
Results Display step in the Setup Tool, place a code in front of the reader,
and press the black trigger button. The Setup Tool should display the
image and the decoded string.
Troubleshooting
If you are unable to read a code, verify that
You have scanned the correct connection code on page 14.
If you are using your PC’s USB to power the DataMan 100, make sure
that your PC’s USB port can supply enough power (2.5W peak). Connect
the DataMan 100 power supply (DM100-PWR-000) to the USB adapter
cable if needed.
If you are using a direct USB connection, make sure that the USB
adapter cable is connected to the DataMan 100 before you connect the
USB cable to your PC. Connecting or disconnecting the 15-pin plug from
the USB cable while the PC is connected may cause a USB driver crash
on the PC.
If you are using a USB connection with the I/O module, make sure that
the DataMan 100 is connected to the I/O module before you connect
the I/O module to your PC. Connecting or disconnecting the 15-pin plug
from the I/O module while the PC is connected may cause a USB driver
crash on the PC.
•
•
•
•
8
9
COGNEX
5 mil: 34-50 mm
10 mil: 21-56 mm
15 mil: 11-70 mm
20 mil: 8-75 mm
105
40
65
(40 mm) 50
50
0
50
100 150 200
1
2
3
Setting DataMan 100 Focus Position
DataMan can operate in one of three distance ranges. To set the focus position:
Reading Distances (40 mm)
Remove screws
and lens cover.
Set focus
position.
Replace lens
cover and
screws.
10
11
COGNEX
10 mil: 32-88 mm
15 mil: 28-105 mm
20 mil: 18-115 mm
30 mil: 10-140 mm
105
40
65
(65 mm) 50
50
0
50
100 150 200
COGNEX
(105 MM) 50
50
0
50
100 150 200
15 mil: 35-170 mm
20 mil: 27-185 mm
30 mil: 15-225 mm
105
40
65
10 mil: 61-131 mm
Reading Distances (65 mm) Reading Distances (105 mm)
12
13
M3 x 5
15°
Universal Mounting Bracket Optimizing Lighting
Mounting the DataMan 100 at
a slight angle (15°) can reduce
reections and improve reader
performance.
14
15
COGNEX
DO NOT HOT PLUG
DM100 IOBOX
IOB10200-3001-R1R
RS232 USB24VDC
— +
OUTPUT
0 1 C 0 1 C
INPUT
COGNEX
DO NOT HOT PLUG
DM100 IOBOX
IOB10200-3001-R1R
RS232 USB24VDC
— +
OUTPUT
0 1 C 0 1 C
INPUT
1
2
1
2
USB Connections
When connected to a PC over USB, the DataMan 100 appears as either a
COM port or as a standard USB keyboard. You control the connection type by
scanning the appropriate connection code
NOTE: DataMan PC software
must be installed for this
connection type!
Connect direct to PC using
cable
DM100-USB-000.
Connect to PC through
I/O module
DM100-IOBOX-000.
Scan desired connection code:
RS-232 Connections
You can connect the DataMan 100 to a PC or other device over a standard
RS-232 serial connection. NOTE: You must supply external power to use
this connection type.
or
USB Serial USB Keyboard
NOTE: You cannot use
the setup tool with this
connection type.
Connect direct to PC or
other device using cable
DM100-RS232-000.
Connect to through I/O
module
DM100-IOBOX-000.
or
RS-232 Serial
Scan connection code:
See page 27 for codes to set baud rate
and other RS-232 parameters.
Optional
power
supply
16
17
COGNEX
DO NOT HOT PLUG
DM100 IOBOX
IOB10 200-3001-R1R
RS232 USB24VDC
— +
OUTPUT
0 1 C 0 1 C
INPUT
1 2 3 4
COGNEX
DO NOT HOT PLUG
DM100 IOBOX
IOB10 200-3001-R1R
RS232 USB24VDC
— +
OUTPUT
0 1 C 0 1 C
INPUT
24V
DC
–
+
COGNEX
DO NOT HOT PLUG
DM100 IOBOX
IOB10 200-3001-R1R
RS232 USB24VDC
— +
OUTPUT
0 1 C 0 1 C
INPUT
24V
DC
–
+
1
2
3
4
Wiring DataMan 100
Input Wiring Example
Output Wiring Example
Power: 5–24 VDC, 2.5W peak. Connect either ground pin to chassis
ground.
Discrete Output: Current sink only; must connect logical ground to
common. Outputs are opto-isolated and protected against reverse
polarity. Max current 50 mA @ 24 VDC. Output 1 used for external
illumination control by default.
Trigger Input: Opto-isolated, polarity-independent, current source
or sink. Input 0 is dedicated trigger line; Input 1 is not used.
RS-232 and USB: If USB connection is detected, USB
communications is automatically selected; otherwise RS-232
connection is used.
Andere Handbücher für DataMan 100
3
Inhaltsverzeichnis
Andere Cognex Barcode-Lesegerät Handbücher
Cognex
Cognex DataMan 260 Series Bedienungsanleitung
Cognex
Cognex In-Sight 2800 Series Bedienungsanleitung
Cognex
Cognex DataMan 475 Bedienungsanleitung
Cognex
Cognex DataMan 360 Series Bedienungsanleitung
Cognex
Cognex DataMan 8050 Bedienungsanleitung
Cognex
Cognex DataMan 8072 DL Bedienungsanleitung
Cognex
Cognex DataMan 700 series Bedienungsanleitung
Cognex
Cognex DataMan 8072 Verifier Bedienungsanleitung
Cognex
Cognex DataMan 100 Bedienungsanleitung
Cognex
Cognex DataMan 300 Series Bedienungsanleitung
Cognex
Cognex DataMan 70 Bedienungsanleitung
Cognex
Cognex DataMan 8000 Series Bedienungsanleitung
Cognex
Cognex DataMan 503 Bedienungsanleitung
Cognex
Cognex DataMan 370 Series Bedienungsanleitung
Cognex
Cognex DataMan 8000 Series Bedienungsanleitung
Cognex
Cognex DataMan 475 Bedienungsanleitung
Cognex
Cognex DataMan 150 Series Bedienungsanleitung
Cognex
Cognex DM 8072DL Bedienungsanleitung
Cognex
Cognex DataMan Administratorhandbuch
Cognex
Cognex DataMan 8600 Series Bedienungsanleitung
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
