CommScope NG4access ODF Platform Value-Added Module Bedienungsanleitung

860652745 Rev A

CommScope Technical Assistance

http://www.commscope.com/SupportCenter

NG4access ODF Platform

Rear Side Routing Guide

for Integrated Frame

TC-96285-IP • Rev A • February 2020

FIBERGUIDE SYSTEM

27034-A

Table of Contents

IFC FromOverhead .................. 2

IFC From Under Floor .............. 3

NG4 C-MODs With 120-Inch

Breakout ............................... 4

864 NG4 C-MODs With 76-Inch

Breakout ............................... 5

IFC Fanout Cables With 60-Inch

Breakout ............................... 6

FOT Patch Cord from Overhead

(Preferred Routing).................. 7

OSP/IFC to Splice Chassis

(Overhead)............................. 8

OSP/IFC to Splice Chassis

(Under Floor).......................... 9

Pigtail C-MOD to Splice

Chassis..................................10

Installing Adapter Packs ..........11

Installing a C-MOD, VAM, or

MPO-Module Into Access Tray... 12

Routing Cables from Access

Tray .....................................13

Customer Information ............ 14

27039-A

TC-96285-IP • Rev A • February 2020

IFC From

Overhead

Clamp cable at top

right of frame (A).

Route through

outer channel (B).

Form drip loop

(C). If terminat-

ing C-MOD on

right side of chas-

sis, route through

trumpet

are (D) to

chassis. If on

left side, route

through cross-

frame trough

(E) and

around

radius

limiter (F)

to chassis.

Snap

C-MOD

into tray

(see

pages

12-13).

27040-A

www.commscope.com Page 3

TC-96285-IP • Rev A • February 2020

IFC From Under

Floor

Clamp cable at

bottom right of

frame (A). Route

cable sub-unit

through outer

channel (B). If

terminating on

right side of chas-

sis, route through

trumpet are (C),

snap cabled mod-

ule into tray (see

page 12).

Take up slack on

appropriate

spool* (D).

(*Spool kit must

be ordered

separately.)

If on left side,

route through

crossframe

trough (E),

around radius

limiter (F);

snap C-MOD

into tray (see

pages 12-13).

Take up slack

on highest

spool within

reach (G).

97042-A

CABLE

1-288

577-864

289-576

CABLE

1-288

FIBERGUIDE SYSTEM

TC-96285-IP • Rev A • February 2020

864 NG4 C-MODs With 120-Inch Breakout

All cables are clamped at the top (A) and all fanouts are

positioned near the top of the frame (B). 120-inch breakout

is from the fanout to the C-MOD. For IFC from Under the

Floor option, the fanouts would be located near the lowest

chassis location.

97043-A

CABLE 4

1-288

577-864

289-576

CABLE 3

CABLE 2

CABLE 1

1-288

CABLE 4

FANOUT

LOCATION

CABLE

FINGER

TOP

CLAMP

LOCATION

CABLE 3

FANOUT

LOCATION

CABLE

FINGER

CABLE 2

FANOUT

LOCATION

CABLE

FINGER

CABLE 1

FANOUT

LOCATION

CABLE

FINGER

FIBERGUIDE SYSTEM

www.commscope.com Page 5

TC-96285-IP • Rev A • February 2020

864 NG4 C-MODs With 76-Inch Breakout

All cables are clamped at the top and the fanouts are stag-

gered down the frame and positioned as close as possible

to the chassis being routed to. For IFC from Under the

Floor option, move fanouts down one chassis from what is

shown below.

97090-A

CABLE 4

CABLE 3

CABLE 2

CABLE 1

CABLE 6

FANOUT

LOCATION

CABLE

FINGER

CABLE

FINGER

CABLE

FINGER

TOP

CLAMP

LOCATION

CABLE 4

FANOUT

LOCATION

CABLE

FINGER

CABLE 3

FANOUT

LOCATION

CABLE 1

FANOUT

LOCATION

CABLE

FINGER

FIBERGUIDE SYSTEM

CABLE 2

FANOUT

LOCATION

CABLE 5

FANOUT

LOCATION

Page 6 www.commscope.com

TC-96285-IP • Rev A • February 2020

IFC Fanout Cables With 60-Inch Breakout

All cables are clamped at the top and the fanouts are stag-

gered down the frame and positioned as close as possible

to the chassis being routed to. For IFC from Under the

Floor option, move fanouts down one chassis from what is

shown below.

FIBERGUIDE SYSTEM

27041-A

TC-96285-IP • Rev A • February 2020

FOT Patch Cord

From Overhead,

Route patch cord

from FiberGuide

into FOTSP chan-

nel (A). Route

down FOTSP

channel (B). If

terminating cable

on right side of

chassis, route

cable through

trumpet are (C)

to chassis. If on

left side, route

cable through

crossframe

trough (D),

around radius

limiter and into

chassis (E). Plug

connector into

adapter port

(see pages 11,

13). Hang

slack over

FOTSP

spool (F).

TC-96285-IP • Rev A • February 2020

OSP/IFC to

Splice Chassis

From Overhead

Clamp cable

at top right of

frame (A)

using standard

clamp.

Route

through outer

channel (B)

to area below

splice

chassis (C).

For splice

chassis detail,

refer to

TECP-90-704.

27036-A

SPLICE

CHASSIS

TC-96285-IP • Rev A • February 2020

OSP/IFC to

Splice Chassis

From Under

Floor

Clamp cable at

bottom right

using under-

oor clamp

(A).

Route through

outer chan-

nel (B) around

spool (C).

Route cable

to area below

splice chassis

(D).

For splice

chassis details,

refer to

TECP-90-704.

97037-A

SPLICE

CHASSIS

www.commscope.com Page 9

Page 10 www.commscope.com

TC-96285-IP • Rev A • February 2020

Pigtail C-MOD

to Splice

Chassis

If installing

pigtail C-MOD

on right side

of frame (A),

route cable

through trum-

pet are (B)

and down

through inner

channel (C)

to area below

splice chassis

(D). If on left

side (E), route

cable down and

around radius

limiter (F),

through

crossframe

trough (G), and

then through

inner chan-

nel (C) to area

below splice

chassis (D).

For

instructions

on installing

C-MOD,

see pages

12-13.

25848-A

SPLICE

CHASSIS

PIGTAIL

CABLED

MODULE

Andere Handbücher für NG4access ODF Platform Value-Added Module

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CommScope Netzwerk-Hardware Handbücher

CommScope

CommScope FPX Series Bedienungsanleitung

CommScope

CommScope SCIL-B Bedienungsanleitung

CommScope

CommScope SD-4U-SPLICE PANEL Bedienungsanleitung

CommScope

CommScope SYSTIMAX AirSPEED AP542 Bedienungsanleitung

CommScope

CommScope FOSC-OC-6 Bedienungsanleitung

CommScope

CommScope SYSTIMAX 360 iPatch G2 MPO Bedienungsanleitung

CommScope

CommScope MRJ21 Quick Fit Cassette Bedienungsanleitung

CommScope

CommScope M3200 Bedienungsanleitung

CommScope

CommScope NOVUX SEC 100 Bedienungsanleitung

CommScope

CommScope LSX Bedienungsanleitung

CommScope

CommScope NOVUX DSC 650 Bedienungsanleitung

CommScope

CommScope UNJ10G Bedienungsanleitung

CommScope

CommScope ST-BSP60 Bedienungsanleitung

CommScope

CommScope FDC-W8-FAT Bedienungsanleitung

CommScope

CommScope SYSTIMAX EHD Bedienungsanleitung

CommScope

CommScope ION-U EU H 23/23 Bedienungsanleitung

CommScope

CommScope ION-M7P Bedienungsanleitung

CommScope

CommScope TC-96370-IP Bedienungsanleitung

CommScope

CommScope Mini-OTE 300 Bedienungsanleitung

CommScope

CommScope ION-U EU H 7P/80-85P/17P/19P Bedienungsanleitung

CommScope

CommScope RUCKUS SmartZone 100 Bedienungsanleitung

CommScope

CommScope EHD Bedienungsanleitung

CommScope

CommScope Constellation CPT-PP-48C Bedienungsanleitung

CommScope

CommScope CPPR-QF-F-1U-E Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung