Craftsman 113.177621 Bedienungsanleitung

owner's

manual

MODEL NO.

113.177621

Serial

Number

Model and serial

numbers may be

found underneath the

handle. You should

record both model and

serial numbers in a

safe place for future

use.

_WARNING:

FOR YOUR

SAFETY,

READ ALL

INSTRUCTIONS

CAREFULLY

SAVETHIS

MANUAL

FOR FUTURE

REFERENCE J

CRRFT MRII °

20 GALLON

WET/DRY VAC

•safety

•assembly

•operation

•maintenance

•repair parts

•Espahol - pagina 15

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Part No. SP6750 Printed in Mexico

Warranty

Craftsman One Year Full Warranty

If this Craftsman product fails due to a defect in material or workmanship

within one year from the date of purchase, return it to any Sears store,

Sears Service Center, or other Craftsman outlet in the United States for

free repair (or replacement if repair proves impossible),

This warranty applies for only 90 days from the date of purchase if this

product is ever used for commercial or rental purposes,

This warranty does not include bags or filters, which are expendable

parts that can wear out from normal use within the warranty period,

This warranty gives you specific legal rights, and you may also have other

rights, which vary, from state to state,

Sears, Roebuck and Co,, Hoffman Estates, IL 60179

IMPORTANT SAFETY INSTRUCTIONS

Safety is a combination of using common

sense, staying alert, and knowing how your

Wet/Dry Vacuum cleaner ("Vac") works.

Safety Signal Words

A. DANGER: Indicates a hazardous

situation which, if not avoided, will result

in death or serious injury.

A. WARNING: Indicates a hazardous

situation which, if not avoided, could

result in death or serious injury.

_, CAUTION: Indicates a hazardous

situation which, if not avoided, could

result in minor or moderate injury.

When using your Vac, always follow basic

safety precautions including the following:

A WARNING-Toreduce

the risk of fire, electric shock, or injury:

•Read and understand this manual and

all labels on the Vac before operating.

• Use only as described in this manual.

• Do not leave Vac running while

unattended - you may fail to notice

important signs indicating abnormal

operation such as loss of suction,

debris/liquid exiting exhaust, or

abnormal motor noises. Immediately

stop using Vac if you notice these signs.

• Do not leave Vac while plugged in.

Unplug from outlet when not in use and

before servicing.

• Sparks inside the motor can ignite

flammable vapors or dust. To reduce

the risk of fire or explosion, do not use

near combustible liquids, gases, or

dusts, such as gasoline or other fuels,

lighter fluid, cleaners, oil-based paints,

natural gas, coal dust, magnesium

dust, grain dust, aluminum dust, or gun

powder.

• Do not vacuum anything that is burning

or smoking, such as cigarettes,

matches, or hot ashes.

• Do not vacuum drywall dust, cold

fireplace ash, or other fine dusts with

standard filter. These may pass

through the filter and be exhausted

back into the air. Use a fine dust filter

instead.

• To reduce the risk of inhaling toxic

vapors, do not vacuum or use near

toxic or hazardous materials.

• To reduce the risk of electric shock,

do not expose to rain or allow liquid to

enter motor compartment. Store

indoors.

• Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

• Do not use with a torn filter or without

the filter installed except when

vacuuming liquids as described in this

manual. Dry debris ingested by the

impeller may damage the motor or be

exhausted into the air.

• TurnoffVacbeforeunplugging.

• Toreducetheriskofinjuryfrom

accidentalstarting,unplugpowercord

beforechangingorcleaningfilter.

• Donotunplugbypullingoncord.

Tounplug,grasptheplug,notthecord.

• Donotusewithdamagedcord,plugor

otherparts.IfyourVacisnotworking

asitshould,hasmissingparts,has

beendropped,damaged,leftoutdoors,

ordroppedintowater,callcustomer

service.

• Donotpullorcarrybycord,usecord

ashandle,closeadooroncord,orpull

cordaroundsharpedgesorcorners.

DonotrunVacovercord.Keepcord

awayfromheatedsurfaces.

• Donothandleplug,switch,ortheVac

withwethands.

• Useonlyextensioncordsthatarerated

foroutdooruse.Extensioncordsinpoor

conditionortoosmallinwiresizecan

posefireandshockhazards.Toreduce

theriskofthesehazards,besurethe

cordisingoodconditionandthatliquid

doesnotcontacttheconnection.Donot

useanextensioncordwithconductors

smallerthan16gauge(AWG)insize.

Toreducepowerloss,usea14gauge

extensioncordif25to50ft.longand

12gaugefor50ft.orlonger.

• ThisVacisdouble-insulated,eliminating

theneedforaseparategrounding

system.Useonlyidenticalreplacement

parts.ReadtheinstructionsforServicing

Double-InsulatedWet/DryVacs.

• Donotputanyobjectintoventilation

openings.Donotvacuumwithany

ventilationopeningsblocked;keepfree

ofdust,lint,hairoranythingthatmay

reduceairflow.

• Keephair,looseclothing,fingers,and

allpartsofbodyawayfromopenings

andmovingparts.

• Toreducetheriskoffalls,useextra

carewhencleaningonstairs.

• Toreducetheriskofbackinjuryor

falls,donotliftaVacthatisheavywith

liquidordebris.Partiallyemptyby

scoopingdebrisordrainingliquid.

Toreducetheriskofpersonalinjuryor

damagetoVac,useonlyCraftsman

recommendedaccessories.

• Whenusingasablower:

-Directairdischargeonlyatworkarea.

-Donotdirectairatbystanders.

-Keepchildrenawaywhenblowing.

-Donotuseblowerforanyjobexcept

blowingdirtanddebris.

-Donotuseasasprayer.

-Wearsafetyeyewear.

• Toreducetheriskofeyeinjury,wear

safetyeyewear.Theoperationofany

utilityVacorblowercanresultinforeign

objectsbeingblownintotheeyes,which

canresultinsevereeyedamage.

A CAUTION:

• Toreducetheriskofhearingdamage,

wearearprotectorswhenusingfor

extendedtimeorinanoisyarea.

• Fordustyoperations,weardustmask.

• Staticshocksarecommonwhenthe

relativehumidityoftheairislow.

VacuumingfinedebriswithyourVac

candepositstaticchargeonthehose

orVac.Toreducethefrequencyof

staticshocksinyourhomeorwhen

usingthisVac,addmoisturetotheair

withahumidifier.

Observethefollowingwarningsthat

appearonthemotorhousingofyourVac:

[_] OUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY

IDENTICAL REPLACEMENT PARTS.

_i, WARNING: For your own safety,

read and understand owner's

manual. Do not run unattended.

Do not pick up hot ashes, coals, toxic,

flammable or other hazardous

materials. Do not use around

explosive liquids or vapors.

WARNING: To reduce the risk of

electric shock - do not expose to rain -

store indoors.

SAVE THIS MANUAL

Introduction

This Wet/Dry Vac is intended for house-

hold use. It may be used for vacuuming of

wet or dry media and may be used as a

blower.

Read this owner's manual to familiarize

yourself with the product features and to

understand the specific usage of your new

Wet/Dry Vac.

Table of Contents

Section Page

Warranty ........................ 2

Important Safety Instructions ......... 2

Introduction ...................... 4

Table of Contents ................. 4

Assembly ........................ 4

Carton Contents ................. 4

Caster/Caster Foot Assembly ...... 5

Vac Assembly ................... 5

Insert Hose ..................... 6

Accessory Storage ............... 6

Operation ........................ 7

Polarized Plug .................. 7

Vacuuming Dry Materials .......... 7

Vacuuming Liquids ............... 8

Section Page

Emptying the Drum .............. 8

Blowing Feature ................. 9

Maintenance .................... 10

Filter ......................... 10

Filter Cleaning ................. 10

Filter Removal and Replacement... 10

Cleaning a Dry Filter ............. 11

Cleaning a Wet Filter ............ 11

Cleaning and Disinfecting

the Wet/Dry Vac .............. 11

Casters ....................... 11

Storage ....................... 11

Repair Parts ..................... 12

Assembly

Remove entire contents of carton. Check

each item against the Carton Contents

List. Notify your Sears Store or Sears

Service Center immediately if any parts

are damaged or missing.

Carton Contents List

Key Description Qty.

A Vac Assembly .............. 1

B Pos-I-Lock _ Hose Assembly ...1

C Utility Nozzle ............... 1

D Wet Nozzle ................ 1

E Car Nozzle ................ 1

F Crevice Tool ............... 1

G Extension Wands ........... 2

H Caster Foot ................ 4

I Caster .................... 4

J Diffuser ................... 1

K Disposable Filter Bag ........ 1

L Owner's Manual ............ 1

Assembly (continued)

Caster/Caster Foot Assembly

1. Remove the power assembly from the

drum and set aside.

2. Turn the drum upside down on the

floor.

3. Insert the caster feet into the bottom of

drum, as shown (4 places).

4. Push on the caster foot until the foot is

flush with bottom of the drum.

5. Insert the caster stem into the socket of

the caster foot, as shown (4 places).

6. Push on the caster until the ball on the

caster stem is inserted all the way into

the socket. You will hear the ball snap

into the socket and the caster will

swivel easily when positioning is

correct.

7. Turn the drum upright.

Foot

Vac Assembly

1. Line up front (label and switch side) of

power assembly with drain cap and

Vac port located on the front of the

drum.

Note: Power assembly must be aligned

with drum for proper attachment.

2. Place power assembly on top of drum.

3. Be sure power assembly completely

covers the top of the drum so leakage

does not occur.

4. Upon releasing flexible latches, the

power assembly will attach to the

drum.

5. To remove the power assembly, lift up

on the flexible latches and remove from

drum.

Power

_/Assembly

Flexible

Latch

Vacuum

Port

Drain

Assembly (continued)

Insert Hose

Insert the hose locking end of the "Pos-I-

Lock®" hose into the inlet of the Vac. The

hose should snap into place. To remove

the hose from the Vac, press the release

button in the hose assembly and pull the

hose out of the Vac inlet, as shown.

Release Press

and

Button Pull

Accessory Storage

Your accessories may be stored in the

caster feet or in the storage locations on

the lid. The hose may be stored by

wrapping it around the unit and plugging

he open end into one of the storage

locations on the caster feet.

jHose

Power

Push Button

End Of Hose

Operation

WARNING: To reduce the risk of fire, explosion, or damage to Vac:

• Do not leave Vac running while unattended - you may fail to notice important signs

indicating abnormal operation such as loss of suction, debris/liquid exiting

exhaust, or abnormal motor noises. Immediately stop using Vac if you notice

these signs.

• Do not leave Vac plugged-in when not in use.

• Do not continue running when float has cut off suction.

• Do not operate Vac in areas with flammable gases, vapors or explosive dust in the

air. Sparks inside the motor can ignite airborne flammables. Flammable gases

and vapors include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline,

alcohol, or aerosol sprays. Flammable dusts include: coal, magnesium,

aluminum, grain, or gun powder.

• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.

• Do not use Vac as a sprayer.

A_, WARNING: To reduce the risk of electric shock or injury:

• Do not expose to rain or allow liquid to enter motor compartment. Store indoors.

• Do not handle plug, switch, or Vac with wet hands.

• Do not service Vac while it is plugged-in. If your Vac is not working as it should,

has missing parts, has been dropped, damaged, left outdoors, or dropped into

water, return it to an independent service center or call customer service.

• When using an extension cord, use only outdoor-rated cords that are in good

condition. Do not allow the connection to come into contact with liquid.

• Do not vacuum toxic materials to reduce the risk of inhaling the vapors or dust.

Polarized Plug

To reduce the risk of electric shock, this

Vac has a polarized plug (one blade is

wider than the other). This plug will fit in a

polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a

qualified electrician to install the proper

outlet. Do not change the plug in any

way.

After you plug the power cord into the

outlet, turn the unit on by pushing the

switch from position "0" to position "1".

The symbols used on the switch actuator

are international "On & Off" symbols:

=OFF I=ON

Vacuuming Dry Materials

1. The filter must always be in correct

position to reduce the risk of leaks and

possible damage to Vac.

2. When using your Vac to pick up very

fine dust, it will be necessary for you to

empty the drum and clean the filter at

more frequent intervals to maintain

peak Vac performance.

NOTE: A dry filter is necessary to pick up

dry material. If you use your Vac to pick

up dust when the filter is wet, the filter will

clog quickly and be very difficult to clean.

The optional Craftsman HEPA Rated

Material Filter, stock number 17912 will

do a better job stopping very fine

particles than the 17816 filter.

Operation (continued)

Vacuuming Liquids

_WARNING: Do not operate without

filter cage and float, as they prevent

liquid from entering the impeller and

damaging the motor.

1. When picking up small amounts of

liquid the filter may be left in place.

2. When picking up large amounts of

liquid we recommend that the filter be

removed. If the filter is not removed, it

will become saturated and misting may

appear in the exhaust.

3. When the liquid in the drum reaches a

predetermined level, the float

mechanism will rise automatically to cut

off air-flow. When this happens, turn off

the Vac, unplug the power cord, and

empty the drum. You will know that the

float has risen because Vac airflow

ceases and the motor noise will become

higher in pitch, due to increased motor

speed.

4. After using the Vac to pick up liquids, the

filter must be dried to reduce the risk of

possible mildew and damage to the filter.

IMPORTANT: To reduce the risk of

damage to the Vac do not run motor with

float in raised position.

Emptying the Drum

1. The Vac comes equipped with a drain

for easy emptying of liquids. Simply

unscrew the drain cap and lift the

opposite side slightly to empty the

drum.

2. Another option is to remove the power

assembly.

3. Lay power assembly aside on a clean

area while emptying drum.

4. Dump the drum contents into the

proper waste disposal container.

Ai, WARNING: To reduce the risk of

back injury or falls, do not lift a Vac

heavy with liquid or debris. Scoop or

drain enough contents out to make the

Vac light enough to lift comfortably.

Operation (continued)

Blowing Feature

Your Vac features a blowing port. It can

blow sawdust and other debris. Follow

the steps below to use your Vac as a

blower.

WARNING: Always wear safety

eyewear complying with ANSI Z87.1

(or in Canada, CSA Z94.3) before

using as a blower.

AWARNING: To reduce the risk of

injury to bystanders, keep them clear

of blowing debris.

CAUTION: Wear a dust mask if

blowing creates dust which might be

inhaled.

_k CAUTION: To reduce the risk of

hearing damage, wear ear protectors

when using the Vac/Blower for

extended time or in a noisy area.

1. Locate blowing port of your Vac.

2. Insert the locking end of the "Pos-I-

Lock ®''hose into the blowing port of the

Vac. The hose should snap into place.

To remove the hose from the Vac,

press the release button in the hose

assembly and pull the hose out of the

Vac inlet.

3. (Optional) Attach extension wand to

opposite end of hose, then place the

car nozzle on the wand.

4. Turn Vac on and you are ready to use

your Vac as a blower.

Craftsman recommended accessories are

available at Sears retail stores and

sears.com. The Sears Blower Nozzle

Stock No. 16933 is recommended for

blowing debris.

Push/Pull Handle

Locking Hose End

Blowing

Port

Handle

Car Nozzle

(Optional)

Swivel End

Of Hose

Extension

Wand (Optional)

Maintenance

Filter

WARNING: To reduce the risk of

injury from accidental starting, unplug

power cord before changing or

cleaning filter.

NOTE: This filter is made of high quality

paper designed to stop very small

particles of dust. The filter can be used

for wet or dry pick up. Handle the filter

carefully when removing to clean or

installing it. Creases in the filter pleats

may occur from installation but creases

will not affect the performance of the

filter.

Filter Cleaning

Your filter should be cleaned often to

maintain peak Vac performance.

Be sure to dry the filter before storing or

picking up dry debris.

IMPORTANT: After cleaning, check the

filter for tears or small holes. Do not use

a filter with holes or tears in it. Even a

small hole can cause a lot of dust to

come out of your Vac. Replace it

immediately.

Filter Removal and Replacement

IMPORTANT: To reduce the risk of

damage to the blower wheel and motor,

always reinstall the filter before using the

Vac for dry material pickup.

Filter Removal:

1. Hold the filter tabs of the Qwik Lock TM

filter in each hand.

2. With one thumb on the Qwik Lock TM

stud, which protrudes through the

integrated filter plate, lift up on the filter

tabs while pushing down on the stud.

3. This action will cause the filter to

release from the filter cage. Slide filter

off cage.

Filter Installation:

1. Carefully slide the Qwik Lock TM filter

over the filter cage and press down on

the outside edge of the filter until the

rubber gasket on the bottom of the filter

seats securely around the base of the

filter cage and against the lid.

2. Align the small center hole in the top of

the filter over the Qwik Lock TM stud on

the filter cage. Press firmly on top of

the filter near the stud to allow the filter

to snap over the ball on the end of the

stud. The filter is now attached.

Integrated

Filter Plate PUSH

with Center _DOWH

Hole %

Tabs(2)

PULL

Rubber

Gasket at

Bottom of

Filter (cutaway

view)

wik Lock TM

Stud

Filter

Cage _ _Lid

NOTE: Failure to properly seat the

bottom gasket could result in debris

bypassing the filter.

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Staubsauger Handbücher

Craftsman

Craftsman CMCV002 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176780 Bedienungsanleitung

Craftsman

Craftsman 113.177600 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176060 Bedienungsanleitung

Craftsman

Craftsman 113.17965 Bedienungsanleitung

Craftsman

Craftsman 113.177370 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJH1211 Bedienungsanleitung

Craftsman

Craftsman 113.177145 Bedienungsanleitung

Craftsman

Craftsman 125.12009 Bedienungsanleitung

Craftsman

Craftsman 113.177311 Bedienungsanleitung

Craftsman

Craftsman 315.177530 Bedienungsanleitung

Craftsman

Craftsman 125.16829 Bedienungsanleitung

Craftsman

Craftsman 315.115710 Bedienungsanleitung

Craftsman

Craftsman CMCV002B Bedienungsanleitung

Craftsman

Craftsman 113.177135 Bedienungsanleitung

Craftsman

Craftsman 315.177500 Bedienungsanleitung

Craftsman

Craftsman 113.176110 Bedienungsanleitung

Craftsman

Craftsman 113.176120 Bedienungsanleitung

Craftsman

Craftsman CMXEVBCV945L Bedienungsanleitung

Craftsman

Craftsman 113.177360 Bedienungsanleitung

Craftsman

Craftsman 113.177846 Bedienungsanleitung

Craftsman

Craftsman 113.177810 Bedienungsanleitung

Craftsman

Craftsman 17776 - Clean N Carry 4 Gal. Wet-Dry VAC Bedienungsanleitung

Craftsman

Craftsman 338.17923 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung