Craftsman 125.38909 Bedienungsanleitung

Operator's Manual

8 Gallon Wet/Dry Vacuum

Model No. 125.389___p

CAUTION: Before using this

product, read this manual

and follow all its Safety Rules

and Operating instructions.

•Safety

•Assembly

•Operation

•Maintenance

•Parts

•Espa_ol =p_gina 16

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A

WWW. crafts man. COrn

Warranty

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against

defects in material or workmanship. A defective product will be replaced free of

charge.

For warranty coverage details to obtain free replacement, visit the web page:

www. craftsman.com/warranty

This warranty does not cover bags, filters, hose or attachments, which are

expendable partsthat can wear outfrom normal use within the warranty period.

This ONE YEAR warranty is void if this product is ever used while providing

commercial services or if rented to another person. For 90 DAY commercial and

rental use terms, see the Craftsman warranty web page.

Thiswarranty gives you specific legal rights, and you may also have other rights

which varyfrom state to state.

Sears BrandsManagement Corporation, Hoffman Estates, JL60179

iMPORTANTSAFETY

READ AND UNDERSTANDALL

iNSTRUCTiONS BEFORE USING THiS

VACUUM

Read and understand this operator's

manual and all labels on the Wet/Dry

Vacuum cleaner before operating. Safety is

a combination of common sense, staying

alert and knowing how your vacuum works.

Use this Wet/Dry Vac only as described in

this manual. To reduce the risk of personal

injury or damage to your Wet/Dry Vac, use

only Craftsman recommended accessories.

Household Type

SAVETHiSMANUAL

FOR FUTURE REFERENCE.

When using an electrical appliance,

basic precautions should always be

followed includingthe following:

WARI!IING: o

THE RISK OF FIRE, ELECTRIC

SHOCK OR iNJURY:

, Do not run vac unattended.

•Do not vacuum, or use this Wet/Dry Vac

near flammable liquids, gases, or explosive

vapors like gasoline or other fuels,

lighter fluids, cleaners, oil-based paints,

natural gas, hydrogen, or explosive dusts

like coal dust, magnesium dust, grain

dust, or gun power. Sparks inside the

iNSTRUCTiONS

motor can ignite flammable vapors or

dust.

* Do not vacuum anything that is burning

or smoking, such as cigarettes, matches,

or hot ashes.

*Keep cord away from heated surfaces.

* Do not expose to rain. Store indoors.

, Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

* Do not use with damaged cord, plug or

other parts.

* If vac is not working as it should, has

been dropped, damaged, left outdoors,

or dropped into water, take it to a service

dealer for inspection and repair before

using it again.

, Do not pull or carry by cord, use cord as

handle, close a door on cord, or pull

cord around sharp edges or corners.

, Do not run Wet/Dry Vac over cord.

* Do not handle plug or the Wet/Dry Vac

with wet hands.

* Toreduce the risk of health hazards

from vapors or dusts, do not vacuum

toxic materials.

* Do not store near hazardous materials.

* Do not use this Wet/Dry Vac with a torn

filter or without the filter installed except

when vacuuming liquids as described in

the operation section of this manual.

* Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

*To reduce the risk of injury from accidental

starting,unplugpowercordbefore

changingorcleaningfilter.

•DonotleaveWet/DryVacunattended

whenpluggedin.Unplugfromoutlet

whennotinuseandbeforeservicing.

•TurnoffWet/DryVacbeforeunplugging.

•Donotputanyobjectintoventilation

openings.Donotvacuumwithany

ventilationopeningsblocked;keepfree

ofdust,lint,hairoranythingthatmay

reduceairflow.

•Keephair,looseclothing,fingers,and

allpartsofbodyawayfromopenings

andmovingparts.

•Toreducetheriskoffalls,useextra

carewhencleaningonstairs.

When using as blower:

•Direct air discharge only at work area.

• Do not use Wet/Dry Vac as a sprayer.

• Do not direct air at bystanders.

• Keep children away when blowing.

• Wear safety goggles.

Polarized Plug

To reduce the risk of electrical shock, this

appliance has a polarized plug (one with

the blade wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way. Double insulation [] eliminates

the need for the three wire gro_unded

power cord and grounded power supply

system.

Observe the followingwarnings that

appear on the motorhousing of your Vac:

'_ OUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY

IDENTICAL REPLACEMENT PARTS.

AWARNING

= For your own safety, read and

understand owner's manual.

oDo not allow unit to be in operation if

unattended.

Do not pick up hot ashes, coals,

toxic, flammable or other hazardous

materials.

,Do not use around explosive liquids

_or vapors, j

WARNING: To reduce the risk of

electric shock =do not expose to rain =

store indoors.

,_, WARNING: When using as a blower:

Wear safety goggles labeled "ANSI

Z87.1" (Canada CSA Z94.3) on the

package. Turn unit off before setting on

ground or releasing grasp of handle.

Electric shock could occur if used on

wet surfaces. Direct tool discharge only

at work area. Do not direct discharge at

bystanders. Keep children away.

Extension Cords

When using an extension cord with your VVet/Dry Vac refer to the following table to

determine the required A.W.G. (American Wire Gauge) wire size. Before using

Wet/Dry Vac, make sure it is in good working condition, including power cord.

Also, make sure extension cord is in good working condition prior to use. Make

repairs or replacements before using the vacuum cleaner. Only use extension cords

that are rated for outdoor use.

Length of Extension Cord

25 Feet 50 Feet 100 Feet 150 Feet

110V-120V 7.5 Meters 15.25 Meters 30.5 Meters 45.7 Meters

Amps A.W.G Wire Size

0-6 18 16 16 14

7-10 18 16 14 12

11-12 16 16 14 12

13-16 14 12 Not recommended

Introduction

This Wet/Dry Vac is intended for

vacuuming wet and dry materials and

may be used as a blower.

Read this operator's manual to

familiarize yourself with the product

features and to understand the specific

usage of your new Wet/Dry Vac.

Table of Contents

Section Page

Warranty ................................................. 2

important Safety instructions ........... 2

Polarized Plug .................................... 3

Extension Cords ..................................... 3

introduction ............................................ 4

Table of Contents ................................... 4

Assembly ................................................ 5

Carton Contents List ......................... 5

Unpacking Your Wet/Dry Vacuum

& General Assembly .......................... 6

Operation ................................................ 7

Vacuuming Dry Materials .................. 7

Vacuuming Liquids ............................ 8

Section Page

Maintenance ......................................... 10

Emptying the Collection Tank ........ 10

Installing & Cleaning

the Supplied Cartridge Filter .......... 10

installing A Replacement

Cartridge Filter ................................ 11

Installing & Cleaning

Foam Sleeve Filter.......................... 12

Cleaning & Disinfecting

the Wet/Dry Vac .............................. 12

Storage ............................................. 12

Troubleshooting .................................... 13

Repair Parts ........................................... 14

Blowing Feature ................................. 9

Assembly

Remove entire contents of carton and

check for parts inside the collection

tank. Check each item against the

Carton Contents List. If any parts are

missing or damaged please call

1-800-469-4663 for replacement.

Key

Carton Content List

Description .................................Qty.

Vac Assembly ................................. 1

Handle and Caster Assembly

Screws ........................................... 6

Caster Feet Assemblies ................. 4

Floor Squeegee Nozzle.................. 1

2-1n-1 Utility Nozzle........................ 1

Foam Sleeve Filter ......................... 1

Handle ............................................ 1

Cartridge Filter ............................... 1

Hose Assembly .............................. 1

Extension Wand ............................. 2

Operator's Manual.......................... 1

B C

Handle

Power Head

Vacuum Port

Collection Tank

Drain

On/Off Switch

_ Latch

Assemblies

Assembly (continued)

A Phillps head screw driver is required.

,_, WARNING: Do not plug in power

cord to power outlet, make sure

plug is disconnected before

assembling the wet/dry vac.

UNPACKING YOUR WET/DRY

VACUUM & GENERAL ASSEMBLY

1. Ensure that the power cord is

disconnected from the power outlet.

(Fig. 1)

2. Undo the latches. (Fig. 2)

3. Lift the top section off the tank.

(Fig. 3)

4. Remove the contents from inside the

collection tank, make sure you have

all contents as listed on carton

content list on page 5. (Fig. 4)

5. Turn the tank upside down, and

insert the casters on to the four feet

of the tank. Ensure that they are

mounted correctly. Do not over

tighten. (Fig. 5)

6. insert the handle into the slots on

the power head and pressure into

place.(Fig. 6)

7. For dry vacuum cleaning, install the

supplied cartridge filter. (Fig.7)

8. For wet vacuum cleaning, install the

supplied foam filter. (Fig. 8)

9. Replace the top section on the tank.

(Fig. 9)

10. Align the top section with the

clasps and snap into place by

applying pressure until clasps click.

(Fig. 9)

11. insert the large end of the hose

into the front inlet of the tank and

turn to lock,Fit the required

accessory on to the suction tube.

(Fig.10 & Fig.11)

12. After vac use, store hose,

accessories and cord as illustrated

on page 12.

Operation

Vacuuming Dry Materials

,_ WARNING: Be sure to read, understand and apply all the information in the

important Safety instructions section at the beginning of this operator's manual.

Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the

air. Flammable gases or vapors include but are not limited to: lighter fluid,

solvent type cleaners, oil-base paints, gasoline, alcohol or aerosol sprays.

Explosive dusts include but are not limited to: coal, magnesium, grain or gun

powder. To reduce the risk of health hazards from vapors or dust, do not

vacuum toxic materials.

1. Ensure that the power cord is

disconnected from the outlet. (Fig. 1)

2. For dry vacuuming, the cartridge filter

must be installed correctly. To verify,

please refer to Installing Cartridge Filter

on page 10.

3. Ensure that the cartridge filter is

completely mounted. Ensure that the

filter is inserted all the way. (Fig. 2, Fig. 3)

4. Replace the top section on the tank,

and secure it in place using the clasps.

(Fig.4)

5. insert the larger end of the hose into

the front inlet on the tank and lock it in

place. Push the required attachment on

to the free end of the hose or extension.

(Fig. 5)

6. Plug the power cord in to the power

outlet. (Fig. 6)

7. Turn the motor on by flipping the

switch to the 'l' position. (Fig. 7)

O=OFF I = ON

8. Once you have completed

vacuuming, flip the switch to the '0'

position and unplug the power cord

from the power outlet.

DO NOT USE THE CARTRIDGE FILTER

FOR LiQUiD VACUUMING.

CAUTION: Do not vacuum drywall dust,

fireplace soot or ash with standard

Wet/Dry filter. This is very fine dust

which will not be captured by the filter

and may cause damage to motor. To

purchase the fine dust filter, call

1-800-469-4663 or visit a Sears store.

Operation (continued)

Vacuuming Liquids

,_ WARNING: Be sure to read, understand and apply all the information in the

important Safety instructions section at the beginning of this operator's manual.

Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the

air. Flammable gases or vapors include but are not limited to: lighter fluid,

solvent type cleaners, oil=base paints, gasoline, alcohol or aerosol sprays.

Explosive dusts include but are not limited to: coal, magnesium, grain or gun

powder. To reduce the risk of health hazards from vapors or dust, do not

vacuum toxic materials.

WARNING: Do not plug in power cord to power outlet, make sure plug is

disconnected before assembling the Wet/Dry Vac.

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. Remove cartridge filter as shown in

Removing and Cleaning Cartridge

Filter on page 10. Then install the

foam sleeve filter as shown in

Installing Foam Sleeve Filter on page

12 and secure power head back on

the collection tank. (Fig. 2)

DO NOT USE THE CARTRIDGE FILTER

FOR LIQUID VACUUMING.

3. Fit the desired nozzle to the vacuum

hose. (Fig. 3)

4. Verify that the power switch isin the 'O'

OFF position before plugging the

power cord into the outlet. (Fig. 4)

5. Turn the motor on by pressing the

switch to the '1'ON position. (Fig. 5)

6. Once you have completed vacuuming,

press the power switch to the 'O' (OFF)

position and unplug the power cord

from the outlet.

7. After use, empty the collection tank by

unscrewing the drain cap and drain

liquids into suitable receptacle or

drain. (Fig. 6, Fig. 7) Remember to refit

the drain cap to the tank after draining.

MPORTANT! When vacuuming large

quantities of liquids, do not immerse the

nozzle completely in the liquid; leave a

gap at the tip of the nozzle opening to

allow air inflow. The machine isfitted with

afloat valve that stops the suction action

when the collection tank reaches its

maximum capacity. You will notice an

increase in motor speed. When this

happens, turn off the machine,

disconnect from power supply, and drain

the liquid into a suitable receptacle or

drain. To continue vacuuming, refit the

collection tank with the drain cap. After

wet vacuuming, turn the machine off and

remove plug from power supply. Empty

the collection tank, clean and dry the

inside and outside before storage.

REMEMBER! The foam filter must be

removed after wet vacuuming and a

cartridge filter must be installed before

dry vacuuming again.

Operation (continued)

Blowing Feature

WARNING:

Always wear safety goggles complying with ANSi Z87.1 (or in

Canada, CSA Z94.3) before using blower.

Keep bystanders clear from blowing debris.

Wear a dust mask if blowing creates dust that might be inhaled.

This Wet/Dry Vac has blowing capabilities.

Touse the blower feature follow the

instructionslisted.

1. Make sure the collection tank isempty

before using as a blower.

2. Remove hose from the vacuum port.

3. insertthe large end of the hose intothe

blower connection in the top of the

motor housing. (Fig. 1)

4. Fit the desired attachment to the hose.

(Fig. 2)

6. Ensurethe power switch isturned off

and plug inthe power supply. (Fig. 3,)

7. Turnthe motor on by flipping the switch

to the "r' position (Fig. 4)

8. The unit will now blow through the

vacuum hose and can be used to clear

obstructions within the hose. (Fig. 5)

Maintenance

Emptying the Collection Tank

I_ _ ....:_ ! I _/_,_Jl

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. Disconnect the hose from the vacuum.

(Fig. 2)

3. Undo the latches and remove the power

head from the collection tank. (Fig. 3)

Place power head on asoft, clean

surface upside down.

4. Clear all dirt or debris from the collection

tank and hose into a proper waste

container. (Fig. 4)

5. Clean or replace the filters.

6. Check the hose, attachments, and

power cord to verify that they have not

been damaged.

7. Place power head on collection tank and

secure latches.

NOTICE! The filter included is made of

high quality material designed to stop small

dust particles. The filter should be used for

dry pick-up only. A dry filter is necessary

to pick up dust. If the dust filter is wet, it

will clog quickly and be very difficult to

clean. Handle the filter carefully when

removing it for cleaning and replacing it.

Check the filters for tears or small holes; a

small hole can let dust pass through and

out of the cleaner. Do not use a filter with

holes or tears; replace it immediately,

installing & Cleaning the Supplied Cartridge Filter

installing Cartridge Filter

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. Undo the latches and remove the

power head from the collection tank.

3. Place power head on a clean surface in

upside down position.

4. Slide the cartridge filter over the filter

cage. (Fig. 2) Carefully push filter down

until it is fully seated on the power head.

(Fig. 3)

5. To secure filter; put on retainer nut and

turn clockwise to tighten until snug. Do

not over tighten. (Fig. 4)

Removing and Cleaning Cartridge Filter

1. Position power head in the upside down

position. If the retainer nut was used to

secure the filter, remove retainer nut by

turning counter clockwise.

2. Carefully lift filter up from filter cage.

(Fig. 5)

NOTE: For best cartridge filter cleaning

results, cleaning should be conducted

outdoors and not indoors.

3. To clean a dry cartridge filter after it has

been removed, gently tap it against the

insidewall of the container or brush the

dirt off. Debris will begin to break up,

loosen and fall.

Andere Handbücher für 125.38909

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Staubsauger Handbücher

Craftsman

Craftsman 113.177825 Bedienungsanleitung

Craftsman

Craftsman 113.170660 Bedienungsanleitung

Craftsman

Craftsman 113.176120 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJC809 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE175840 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVFB511 Bedienungsanleitung

Craftsman

Craftsman 113.178490 Bedienungsanleitung

Craftsman

Craftsman 338.17923 Bedienungsanleitung

Craftsman

Craftsman SEARS 113.170370 Bedienungsanleitung

Craftsman

Craftsman 113.177311 Bedienungsanleitung

Craftsman

Craftsman 113.177110 Bedienungsanleitung

Craftsman

Craftsman 113.170250 Bedienungsanleitung

Craftsman

Craftsman 125.16825 Bedienungsanleitung

Craftsman

Craftsman 17761 - 16 Gal. Wet-Dry VAC Bedienungsanleitung

Craftsman

Craftsman 113.170170 Bedienungsanleitung

Craftsman

Craftsman 125.12005 Bedienungsanleitung

Craftsman

Craftsman 247.770990 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176560 Bedienungsanleitung

Craftsman

Craftsman 315.177520 Bedienungsanleitung

Craftsman

Craftsman 113.177980 Bedienungsanleitung

Craftsman

Craftsman 113.170200 Bedienungsanleitung

Craftsman

Craftsman 125.38909 Bedienungsanleitung

Craftsman

Craftsman 17765 - 5.0 Peak HP Wet/Dry Vac Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176060 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung