Craftsman 113.176120 Bedienungsanleitung

owner's

manual

MODEL NO.

113.176120

Serial

Number

Model number is found in

the rear on the UL label.

Serial number will be

found on the inside (back

side) of the latch.

You should record both

model and serial

numbers in a safe place

for future use.

WARNING"

FOR YOUR

SAFETY,

READ ALL

INSTRUCTIONS

CAREFULLY

SAVE THIS

MANUAL

FOR FUTURE

REFERENCE J

CRRFlrsM8N°

4 GALLON

PORTABLE

WET/DRY VAC

• safety

• assembly

• operation

• maintenance

• repair parts

• EspaRol- pagina 13

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

Part No. SP6772 Printed in China

Warranty

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against any

defects in material or workmanship. Defective product will be replaced free of

charge.

For warranty coverage details to obtain free replacement, visit the web site:

www.craftsman.com

This warranty does not cover filters, hose or attachments, which are expendable

parts that can wear out from normal use within the warranty period.

This warranty is void if this product is ever used while providing commercial

services or if rented to another person.

This warranty gives you specific legal rights, and you may also have other rights,

which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

IMPORTANT SAFETY INSTRUCTIONS

Safety is a combination of using common

sense, staying alert, and knowing how your

Wet/Dry Vacuum cleaner ("Vac") works.

Safety Signal Words

A DANGER: Indicates a hazardous

situation which, if not avoided, will result

in death or serious injury.

Ak WARNING: Indicates a hazardous

situation which, if not avoided, could

result in death or serious injury.

CAUTION: Indicates a hazardous

situation which, if not avoided, could

result in minor or moderate injury.

When using your Vac, always follow basic

safety precautions including the following:

WARNING-To reduce

the risk of fire, electric shock, or

injury:

Read and understand this manual and

all labels on the Vac before operating.

Use only as described in this manual.

Do not leave Vac running while

unattended - you may fail to notice

important signs indicating abnormal

operation such as loss of suction,

debris/liquid exiting exhaust, or

abnormal motor noises. Immediately

stop using Vac if you notice these

signs.

• Do not leave Vac when plugged in.

Unplug from outlet when not in use and

before servicing.

• Sparks inside the motor can ignite

flammable vapors or dust. To reduce

the risk of fire or explosion, do not use

near combustible liquids, gases, or

dusts, such as gasoline or other fuels,

lighter fluid, cleaners, oil-based paints,

natural gas, coal dust, magnesium

dust, grain dust, aluminum dust, or gun

powder.

• Do not vacuum anything that is burning

or smoking, such as cigarettes,

matches, or hot ashes.

• Do not vacuum drywall dust, cold

fireplace ash, or other fine dusts with

standard filter. These may pass

through the filter and be exhausted

back into the air. Use a fine dust filter

instead.

• To reduce the risk of inhaling toxic

vapors, do not vacuum or use near

toxic or hazardous materials.

• To reduce the risk of electric shock,

do not expose to rain or allow liquid to

enter motor compartment. Store

indoors.

• Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

• Donotusewithatornfilterorwithout

thefilterinstalledexceptwhen

vacuumingliquidsasdescribedinthis

manual.Drydebrisingestedbythe

impellermaydamagethemotororbe

exhaustedintotheair.

• TurnoffVacbeforeunplugging.

• Toreducetheriskofinjuryfrom

accidentalstarting,unplugpowercord

beforechangingorcleaningfilter.

• Donotunplugbypullingoncord.To

unplug,grasptheplug,notthecord.

• Donotusewithdamagedcord,plugor

otherparts.IfyourVacisnotworking

asitshould,hasmissingparts,has

beendropped,damaged,leftoutdoors,

ordroppedintowater,callcustomer

service.

• Donotpullorcarrybycord,usecord

ashandle,closeadooroncord,orpull

cordaroundsharpedgesorcorners.

DonotrunVacovercord.Keepcord

awayfromheatedsurfaces.

• Donothandleplug,switch,ortheVac

withwethands.

• Useonlyextensioncordsthatarerated

foroutdooruse.Extensioncordsin

poorconditionortoosmallinwiresize

canposefireandshockhazards.

Toreducetheriskofthesehazards,

besurethecordisingoodcondition

andthatliquiddoesnotcontactthe

connection.Donotuseanextension

cordwithconductorssmallerthan

16gauge(AWG)insize.Toreduce

powerloss,usea14gaugeextension

cordif25to50ftlongand12gauge

for50ftorlonger.

• ThisVacisdouble-insulated,

eliminatingtheneedforaseparate

groundingsystem.Useonlyidentical

replacementparts.Readthe

instructionsforServicingDouble-

InsulatedWet/DryVacs

• Donotputanyobjectintoventilation

openings.Donotvacuumwithany

ventilationopeningsblocked;keepfree

ofdust,lint,hairoranythingthatmay

reduceairflow.

• Keephair,looseclothing,fingers,and

allpartsofbodyawayfromopenings

andmovingparts.

• Toreducetheriskoffalls,useextra

carewhencleaningonstairs.

• Toreducetheriskofpersonalinjuryor

damagetoVac,useonlyCraftsman

recommendedaccessories.

• Toreducetheriskofeyeinjury,wear

safetyeyewear.Theoperationofany

utilityVacorblowercanresultin

foreignobjectsbeingblownintothe

eyes,whichcanresultinsevereeye

damage.

,_, CAUTION:

• To reduce the risk of hearing damage,

wear ear protectors when using for

extended time or in a noisy area.

• For dusty operations, wear dust mask.

• Static shocks are common when the

relative humidity of the air is low.

Vacuuming fine debris with your Vac

can deposit static charge on the hose

or Vac. To reduce the frequency of

static shocks in your home or when

using this Vac, add moisture to the air

with a humidifier.

Observe the following warnings that

appear on the motor housing of your Vac:

F_ DOUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY

IDENTICAL REPLACEMENT PARTS.

,_, WARNING: For your own safety,

read and understand owner's

manual. Do not run unattended.

Do not pick up hot ashes, coals,

toxic, flammable or other hazardous

materials. Do not use around explosive

liquids or vapors.

_, WARNING: To reduce the risk of

electric shock - do not expose to rain -

store indoors.

SAVE THIS MANUAL

Introduction

This Portable Wet/Dry Vac is intended for

household use. It may be used for

vacuuming wet or dry media.

Read this owner's manual to familiarize

yourself with the product features and to

understand the specific usage of your

new Wet/Dry Vac.

Table of Contents

Section Page

Warranty ........................ 2

Important Safety Instructions ........ 2-3

Introduction ...................... 4

Table of Contents ................. 4

Assembly ........................ 4

Carton Contents List ............. 4

Tools Required .................. 4

Tool Caddy Assembly ............. 5

Wheels/Caster Assembly .......... 5

Insert Hose ..................... 6

Accessory Storage ............... 6

Operation ........................ 7

Polarized Plug .................. 7

Section Page

Vacuuming Dry Materials .......... 8

Vacuuming Liquids ............... 8

Emptying the Drum .............. 8

Maintenance ..................... 9

Filter Cleaning .................. 9

Filter Removal and Replacement .... 9

Cleaning a Dry Filter ............ 10

Cleaning a Wet Filter ............ 10

Cleaning and Disinfecting

the Wet/Dry Vac .............. 11

Caster ........................ 11

Storage ....................... 11

Repair Parts ..................... 12

Assembly

Remove entire contents of carton. Check

each item against the Carton Contents

List. Notify your Sears Store or Sears

Service Center immediately if any parts

are damaged or missing.

Carton Contents List

Sears retail replacement filters are sold

Stock No. 17810.

Key Description Qty.

A Wet/Dry Vac ................ 1

B Tool Caddy ................ 1

C Caster ..................... 1

D Wheels .................... 2

E Hose ...................... 1

F Car Nozzle ................. 1

G Sofa Brush ................. 1

H Crevice Toot ................ 1

I Extension Wands ............ 2

J Bag Assembly .............. 1

Screws .................. 4

Owners Manual ............. 1

Tools Required

Phillips

Screwdriver

Assembly (continued)

Tool Caddy Assembly

Locate the tool caddy and the bag

assembly in the carton. The tool caddy is

designed to fit on the back of the

4-Gallon drum and MUST BE assembled

to the Vac BEFORE fastening the wheels.

1. Remove the power head from the drum

and set aside.

2. Turn the drum upside down on a flat

surface.

3. Turn the tool caddy upside down and

align to the back of the drum.

4. Install the four screws in the allotted

holes using a Phillips screwdriver.

Tighten screws until snug. Do not over

tighten as this may tend to deform the

caddy.

Wheels/Caster Assembly

The tool caddy MUST BE assembled to

the Vac BEFORE fastening the wheels.

Locate the two wheels and the caster in

the carton. The caster is designed to fit

towards the front of the drum and the

wheels for the back.

1. Insert the caster into the bottom of the

drum as shown

2. Push the caster until the flange on the

caster stem is inserted all the way into

the socket. You will hear the flange

snap into the socket. The caster wilt

swivel easily when positioning is

correct.

3. Position the axle side of one of the

wheels into the drum as illustrated.

Push wheel into the toot caddy hub.

You will hear the wheel snap into the

tool caddy. Repeat for the second

wheel.

Drum

Head

Screw (4)

Tool Cadd_

_ Caster (1)

Caster Flange

Drum

Assembly (continued)

1. Line up front (label and switch side) of

the power head with the Vac port

located on the front of the drum.

NOTE: Power head must be aligned with

drum for proper attachment.

2. Place power head on top of drum.

3. Be sure power head completely covers

the top of the drum so leakage does

not occur.

4. Push down the flexible latches, and the

power head wilt attach to the drum.

5. To remove the power head, putl up on

the latches and remove from drum.

Insert Hose

Insert the hose locking end of the

"Pos-I-Lock®" hose into the inlet of the

Vac. The hose should snap into place.

To remove the hose from the Vac, press

the release button in the hose assembly

and putl the hose out of the Vac inlet,

as shown.

Handle

On/Off

Power

Head

Drum Top

Release|

Button

Latch (2)

Cord

Accessory Storage

Your Wet/Dry Vac accessories can be

stored in the tool caddy mounted on the

drum.

The hose may be stored by wrapping it

around the unit and snapping it into the

recessed sides. The extension wands

can be stored underneath the Vac by

sliding the tapered end first through the

allotted hole on the back of the caddy.

The wand stop on the front of the Vac

wilt hold the extension wands in place.

Locking End of

"Pos-i=Lock®"

Hose

Storage Accessory

Storage

Extension

6 Wand (2)

Operation

,_ WARNING: To reduce the risk of fire, explosion, or damage to Vac:

Do not leave Vac running while unattended - you may fail to notice important signs indicating

abnormal operation such as loss of suction, debris/liquid exiting exhaust, or abnormal motor

noises. Immediately stop using Vac if you notice these signs.

Do not leave Vac plugged-in when not in use.

Do not continue running when float has cut off suction.

Do not operate Vac in areas with flammable gases, vapors or explosive dust in the air.

Sparks inside the motor can ignite airborne flammables. Flammable gases and vapors

include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline,

alcohol, or aerosol sprays. Flammable dusts include: coal, magnesium, aluminum, grain, or

gun powder.

Do not vacuum up explosive dusts, flammable liquids, or hot ashes.

Do not use Vac as a sprayer.

_. WARNING: To reduce the risk of electric shock or injury:

Do not expose to rain or allow liquid to enter motor compartment. Store indoors.

Do not handle plug, switch, or Vac with wet hands.

Do not service Vac while it is plugged-in. If your Vac is not working as it should, has missing

parts, has been dropped, damaged, left outdoors, or dropped into water, return it to a Sears

service center or call customer service.

• When using an extension cord, use only outdoor-rated cords that are in good condition.

Do not allow the connection to come into contact with liquid.

Do not vacuum toxic materials to reduce the risk of inhaling the vapors or dust.

Polarized Plug

To reduce the risk of electric shock, this

Vac has a polarized plug (one blade is

wider than the other). This plug will fit in a

polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a

qualified electrician to install the proper

outlet. Do not change the plug in any

way.

After you plug the power cord into the

outlet, turn the unit on by pushing the

switch from position "O" to position "l".

The symbols used on the switch actuator

are international "On & Off" symbols:

O="OFF" I =''ON''

Operation (continued)

Vacuuming Dry Materials

1. The filter must always be in correct

position to reduce the risk of leaks and

possible damage to Vac.

2. When using your Vac to pick up very

fine dust, it will be necessary for you to

empty the drum and clean the filter at

more frequent intervals to maintain

peak Vac performance.

NOTE: A dry filter is necessary to pick up

dry material. If you use your Vac to pick

up dust when the filter is wet, the filter wilt

clog quickly and be very difficult to clean.

Dry the filter before storing.

Emptying the Drum

_ WARNING: To reduce the risk of

injury from accidental starting, unplug

power cord before emptying the drum.

1. Remove the power head of the Vac by

pulling outward on the latches located

on each side of the Vac. Lift off the

power head by the handle.

2. Dump the drum contents into the

proper waste disposal container.

jHandle

Vacuuming Liquids

_, WARNING: Do not operate

without filter cage and float, as they

prevent liquid from entering the

impeller and damaging the motor.

1. When picking up small amounts of

liquid the filter may be left in place.

2. When picking up large amounts of

liquid we recommend that the filter be

removed. If the filter is not removed,

it wilt become saturated and misting

may appear in the exhaust.

3. When the liquid in the drum reaches a

predetermined level, the float

mechanism will rise automatically to cut

off air-flow. When this happens, turn off

the Vac, unplug the power cord, and

empty the drum. You wilt know that the

float has risen because Vac airflow

ceases and the motor noise wilt

become higher in pitch, due to

increased motor speed.

4. After using the Vac to pick up liquids,

the filter must be dried to reduce the

risk of possible mildew and damage to

the filter.

IMPORTANT: To reduce the risk of

damage to the Vac do not run motor with

float in raised position.

Head

Latch (2)

Pull Latches

_ Outward and Then

Lift Power Head Up

_ By The Handme

Maintenance

Filter

_, WARNING: To reduce the risk of

injury from accidental starting, unplug

power cord before changing or

cleaning filter.

NOTE: This filter is made of high quality

paper designed to stop very small

particles of dust. The filter can be used

for wet or dry pick up. Handle the filter

carefully when removing to clean or

installing it. Creases in the filter pleats

may occur from installation but creases

will not affect the performance of the

filter.

Filter Cleaning

Your filter should be cleaned often to

maintain peak Vac performance.

Be sure to dry the filter before storing or

picking up dry debris.

IMPORTANT: After cleaning, check the

filter for tears or small holes. Do not use

a filter with holes or tears in it. Even a

small hole can cause a lot of dust to

come out of your Vac. Replace it

immediately.

4. Gently push on the filter plate to seat

the rubber ring of the filter inside the

circular channel of the filter plate.

5. Place the filter nut onto the threaded

screws and tighten it down. Finger

tighten only.

NOTE: Lever of filter nut should be away

from plate as shown.

IMPORTANT: Do not over tighten as this

may deform or crack the filter cage or

filter plate.

NOTE: Your filter has a purple stripe that

matches an in-store disptayer. When you

visit your local Sears store, just

remember the color of your stripe for the

correct size filter.

_ Fitter Nut

__ Filter P,ate

Latch (2) Cage

Head

Filter Removal and Replacement

IMPORTANT: To reduce the risk of

damage to the blower wheel and motor,

always reinstall the filter before using the

Vac for dry material pickup.

Filter Removal:

1. To remove the filter for cleaning or

replacement, unscrew the filter nut

from the filter cage, remove filter plate

and lift off filter.

2. To replace the filter, carefully slide the

filter over the filter cage, sliding it over

the center ring covering the three slots

until the filter stops against the power

head.

3. Place the hole in the filter plate over

the threaded screw of the filter cage.

•Drum

Maintenance (continued)

NOTE: If filter cage needs to be

removed, or replaced, use a flat blade

screwdriver and insert the blade near one

of the tabs between the filter cage and

the center ring of the power head. Pry the

tab out of the slot. Tilt the cage and lift

away from the power head. Replace in

the following manner:

1. Place the float over the opening in the

center of the power head as shown,

laying face down over the hole.

2. Line up filter cage tabs with slots in the

center ring of the power head.

3. Push on the filter cage until the tabs

snap into slots for a secure fit.

Slots (3)

Cleaning A Dry Filter

Some removal of dry debris can be

accomplished without removing the filter

from the Vac. Slap your hand on top of

the power head while the Vac is turned

off.

For best cleaning results due to

accumulated dust, clean the filter in an

open area. Cleaning SHOULD be done

outdoors and not in the living quarters.

After filter removal from Vac, remove the

dry debris by gently tapping the filter

against the inside wall of your dust drum.

The debris will loosen and fall.

For thorough cleaning of dry filter with

fine dust (no debris), run water through it

as described under "Cleaning A Wet

Filter".

Cleaning A Wet Filter

After filter is removed, run water through

the filter from a hose or spigot. Take care

that water pressure from the hose is not

strong enough to damage filter.

Cage

Slots (3)

Filter Tab (3)

Solid End

Head

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Staubsauger Handbücher

Craftsman

Craftsman 113.177060 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE172500 Bedienungsanleitung

Craftsman

Craftsman 113.179881 Bedienungsanleitung

Craftsman

Craftsman 125.04267621-3 Bedienungsanleitung

Craftsman

Craftsman 125.12005 Bedienungsanleitung

Craftsman

Craftsman SEARS 113.179255 Bedienungsanleitung

Craftsman

Craftsman 113.177621 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176560 Bedienungsanleitung

Craftsman

Craftsman 113.177990 Bedienungsanleitung

Craftsman

Craftsman SEARS 113.170370 Bedienungsanleitung

Craftsman

Craftsman 113.179345 Bedienungsanleitung

Craftsman

Craftsman 247.770990 Bedienungsanleitung

Craftsman

Craftsman 113.170200 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176060 Bedienungsanleitung

Craftsman

Craftsman 113.177571 Bedienungsanleitung

Craftsman

Craftsman 17776 - Clean N Carry 4 Gal. Wet-Dry VAC Bedienungsanleitung

Craftsman

Craftsman 125.16829 Bedienungsanleitung

Craftsman

Craftsman 125.38907 Bedienungsanleitung

Craftsman

Craftsman CMCV002B Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJC507P Bedienungsanleitung

Craftsman

Craftsman 125.16821 Bedienungsanleitung

Craftsman

Craftsman 113.177360 Bedienungsanleitung

Craftsman

Craftsman 113.177600 Bedienungsanleitung

Craftsman

Craftsman 17789 - Wet/Dry Vac Advanced Cleaning... Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung