CrimeStopper REVO-1 Series Bedienungsanleitung

REVO-1, REVO-3, REVO-4

1-Way RemoteStartSystem

INSTRUCTIONS

CONGRATULATIONS on your choiceofaCrimestopper RevoStart1-WayRemoteStartSystem. Thissystemis

an RFAntenna Decoder thatplugsdirectlyintoaFortinor ADSDatamodule.Noadditionalremotestartmoduleis

needed.The featuresofthe system,dependson the vehicleand datamoduleused.ThissystemrequiresaFortin

orADSdatamodulewithaprogrammertoloadcorrectvehiclesoftware.Youwillneedthevehicleinstallguidefrom

Fortinor ADSiDatalinkwebsite.Manyvehicleshavea“PlugnPlay”Tharnessavailabletosimplifytheinstallation.

The remotesneed tobe programmed after installation ofdatamodulebefore operation.Ifanyquestionsarise,

contact your installation dealer or Crimestopper SecurityProductsInc.

CRIMESTOPPERSECURITYPRODUCTS, INC.

1770 S. TAPO STREET, SIMIVALLEY, CA. 93063

REV 09-2013

ThisdevicecomplieswithFCC Rulespart15.Operation is

subjecttothe following twoconditions: 1)Thisdevicemaynot

causeinterference,and (2)thisdevicemustacceptany

interferencethatmaybe received,including interferencethat

maycauseundesired operation.The manufacturerisnot

responsibleforanyradioorTVinterferencecaused by

unauthorized modification tothisequipment. Suchmodification

couldvoidthe user'sauthoritytooperatethe equipment.

USINGTHEREMOTETRANSMITTER

VEH

REVO-1 REVO-3 REVO-4

ForREVO-1

The transmitter supplied hasone Start button.

ForREVO-3

The transmitter supplied withthissystemhas4verticalbuttons–Lock, Unlock, VehicleSelect and Start.

ForREVO-4

The transmitter supplied withthissystemhas5verticalbuttons–Lock, Unlock, TrunkRelease, VehicleSelect

and Start. Thisremotecan controlup to4AUXfunctionsthru datadepending on the vehicleand datamodule.

Thisistypicallyused for operating left and right sliding doorsand GasCap release. Consult your installer.

VEH1=BlueLED

VEH2=Red LED

REVO-4

AuxChannels

AUX1=Trunk+Lock

AUX2=Trunk+Unlock

AUX3=Trunk+Start

AUX4=Lock +Start

BATTERYREPLACEMENT

To replace thebatteryon 1button remote:

Simplyremovethe screwon backofthe transmitter and slide the caseapartasshown.Removethe twoCR-1620

Lithiumbatteriesand replace. Put casebacktogether and tighten screw.

BATTERYREPLACEMENT

To Replace theBatteryon 3and 4button remote:

The RemoteControlusestwoCR-2025 Lithium3VoltBatteries.Simplyremovethe Phillipsscrewlocated behind

keyring (see diagrambelow). Useasmall screwdriver asshowninFigure 2toremovethe backcover.Slide old

batteriesout. Insertthe newbatteriesintoplasticcover and slide intoplacewiththe (+)end facing up.The plastic

cover keepsthe batteriesfromshorting out against the side of metalhousing.

VEH CR2025

Remove

Screw

2VEHICLEOPERATION

AsingleRemote Control cancontrol twodifferentvehicles.

Toset up the 2-Vehicleoperation you must first programyour remotestoVehicle#2. Followthe “Transmitter

Programming”steps(Pg. 6) at the second vehicleand learn YOUR remote, along withvehicle#2’sexisting

remotes.

VEH

Tochange fromvehicle1tovehicle2, press the VEH button on remotefor about 2seconds. The LEDon

remotewill change from BluetoRed. The VEHbutton can be used tokeep remotecontrolfromaccidentally

operating your vehicle.

VEH1=BlueLED

VEH2=Red LED

TRANSMITTERPROGRAMMING

Note: Programming ofData Moduletovehiclemust becompletedFIRST!

Thesystemlearnsup to4differenttransmittercodes.

There are 2methodsof programming remotesdepending on the Datamoduleused tooperateyour vehicle.

ADSiDatalinkProgramming:

1. Insert keyfob intoKeyport or placekeyinignition switch. Completestep 2within7seconds.

2. Cyclethe ignition on fivetimes(5xOff/On) rapidly.

3. Parking Light will flashonce(1x). Completestep 4within5seconds.

4. Press Lock(or start on 1button remote) button on remoteyou wishtoprogram.

5. Parking lightswill flashonce(1x)toconfirmthe remoteisprogrammed.

6. Toprogramadditionalremotes, repeat step 4&5. The systemcan accept up to4remotes.

7. The systemwill automaticallyexit remotelearning procedure after 5secondsof inactivityand the parking

lightswill flashtwice(2x)toconfirmprogramming exit.

Fortin EVO-ALL Programming:

1.Put the EVO-ALL inprogramming mode (see install guide), releaseprogramming button on BLUE/RED.

2.Press and holdthe programming button on EVO-ALL for 5seconds. The 2LED’swill shut downand turn

backONafter 5seconds.

3.Turn the Ignition ON.

4.Press the “Lockor Start”button on remoteyou wishtoprogram.

5.The BLUEand REDLED’swill flashoncetoconfirmremoteiscoded.

6.Toprogramadditionalremotespress the Lockor Start button of eachremote.

7.The BLUEand REDLED’swill flashoncetoconfirmeachremoteiscoded.

8.Turn Ignition OFF onceall remoteshavebeen programmed.

www.crimestopper.com

email@crimestopper.com

Phone (800)998-6880

FAX (805)581-9500

Andere Handbücher für REVO-1 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CrimeStopper Fernstartsystem Handbücher

CrimeStopper

CrimeStopper CS-9704 Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE Start EZ-45DP Bedienungsanleitung

CrimeStopper

CrimeStopper REVO-1 Series Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800.III Bedienungsanleitung

CrimeStopper

CrimeStopper RS-901.V Bedienungsanleitung

CrimeStopper

CrimeStopper SP-400 Bedienungsanleitung

CrimeStopper

CrimeStopper RS700 IIIER Bedienungsanleitung

CrimeStopper

CrimeStopper ezee Start EZ-777 VII Bedienungsanleitung

CrimeStopper

CrimeStopper CS-865RKE II Series Handbuch

CrimeStopper

CrimeStopper COOL START RS-900 Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800.IV Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-3 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2016DPII-FM Informer II Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS7-G5 FM Bedienungsanleitung

CrimeStopper

CrimeStopper cool start RS2-G3 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-777 FM Bedienungsanleitung

CrimeStopper

CrimeStopper EZ-31DP/33DP/34DP Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-1405DP Bedienungsanleitung

CrimeStopper

CrimeStopper COOL START RS-900 Bedienungsanleitung

CrimeStopper

CrimeStopper RS700 IIIER Bedienungsanleitung

CrimeStopper

CrimeStopper RS-999TW1/TW2 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-830RKE Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-30DP Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-1405DP Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch

Rooboost

Rooboost RB-1750WP Bedienungsanleitung

Schumacher

Schumacher INSTANT POWER IP-75C Bedienungsanleitung