CTA PAD-CHKB Bedienungsanleitung

Premium Thin Profile Floor Stand

with Security Enclosure

PAD-CHKB / PAD-CHKW

INSTRUCTION - MANUAL

888-733-4448

CONTENTS:

M5 Nut

M5x12 (4)

M5 Allen Key

Metal Anchor

1. INSTALLING BASE:

ALIGN BASE PLATE (B) WITH THE BODY (A) AND

ROTATE IN SCREWS (G) FROM THE BOTTOM USING THE PROVIDED

ALLEN KEY TOOL (H) AND RELATED HARDWARE NEEDED.

2. SETTING UP

CABLE ROUTING

INSTRUCTIONS:

SLIDE IN THE POWER CORDS

AND ANY OTHER CORDS THAT

WOULD NEED TO BE

CONNECTED TO THE TABLET

THROUGH THE BODY AS

SHOWN. THERE WILL BE GAPS

AT THE TOP AND BOTTOM FOR

THEM TO ROUTE OUT TO THE

POWER SOURCE AND TO THE

DEVICE

**Wire and Cord for Illustration

Purposes Only and Not Included

Foam Adapter & Sheet Bundle

888-733-4448

3. MOUNTING ENCLOSURE TO VESA PLATE

ALIGN THE VESA HOLES ON THE

ENCLOSURE (C) WITH THE VESA MOUNT

ON THE BASE BODY (A). USING THE

SPECIAL ALLEN KEY (H), ROTATE IN

SCREWS (F) FROM THE BACK WHILE

HOLDING THE HEX NUTS (E) FROM THE

FRONT WITH FINGERS. SCREW IN UNTIL

SECURELY TIGHTENED. REPEAT FOR ALL

(4) SCREWS.

F HAE

(OPTIONAL) BOLTING FLOOR STAND DOWN

USING A POWERDRILL OR SIMILAR (NOT PROVIDED) THAT IS THE SAME

SIZE AS YOUR METAL ANCHOR - CREATE A CAVITY IN THE FLOOR.

INSERT THE BASE PART OF THE METAL ANCHOR (I), AND SCREW IN THE

NAIL COMPONENT OF THE METAL ANCHOR (I) FROM ABOVE WITH A

SCREWDRIVER (NOT PROVIDED) UNTIL SECURELY TIGHTENED. REPEAT

FOR ALL HOLES.

**Screwdriver for Illustration

Purposes Only and Not Included

SETTING UP DEVICE & ENCLOSURE

**Tablet shown for illustration

and NOT INCLUDED.

INSERT THE APPROPRIATE FOAM

PIECE (J) THAT IS COMPATIBLE

WITH YOUR TABLET.

INSERT TABLET AS SHOWN. PLUG IN

POWER CABLE TO TABLET AND

CABLE ROUTE THROUGH THE BACK.

PLACE THE APPROPRIATE

PROVIDED TABLET COVER (J) TO

MATCH YOUR TABLET.

CLOSE THE ENCLOSURE

AND LOCK IT WITH THE

INCLUDED SET OF KEYS (I).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CTA Rack & Stand Handbücher

CTA

CTA PAD-KMS Bedienungsanleitung

CTA

CTA PAD-SCGS Bedienungsanleitung

CTA

CTA PAD-USGTW Bedienungsanleitung

CTA

CTA PAD-TPADM Bedienungsanleitung

CTA

CTA PAD-HSKSBAE Bedienungsanleitung

CTA

CTA PAD-WMAB Bedienungsanleitung

CTA

CTA ADD-PARAFS Bedienungsanleitung

CTA

CTA PAD-SCGS Bedienungsanleitung

CTA

CTA PAD-PARAPOSW Bedienungsanleitung

CTA

CTA PAD-PARAFPE Bedienungsanleitung

CTA

CTA ADD-PARAFSV Bedienungsanleitung

CTA

CTA AUT-VDMC Bedienungsanleitung

CTA

CTA CP-CSWMHW Bedienungsanleitung

CTA

CTA PAD-CHKBM10 Bedienungsanleitung

CTA

CTA ADD-FS2VDMB Bedienungsanleitung

CTA

CTA PAD-PARAFDC Bedienungsanleitung

CTA

CTA PAD-SSMA Bedienungsanleitung

CTA

CTA PAD-DSGK Bedienungsanleitung

CTA

CTA PAD-HSKSB Bedienungsanleitung

CTA

CTA PAD-WDM Bedienungsanleitung

CTA

CTA PAD-SHFS Bedienungsanleitung

CTA

CTA ADD-2VDMB Bedienungsanleitung

CTA

CTA PAD-2VDMWA Bedienungsanleitung

CTA

CTA ADD-CPOLEGN Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung