CYP QU-12S Bedienungsanleitung
QU-12S
1 to 2 HDMI Distribution Amplifier with System Reset
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 17/09/2019 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
7. Connection Diagram .......................... 10
8. Specifications...................................... 11
8.1 Technical Specifications ........................11
8.2 Video Specifications................................12
8.3 Cable Specifications ...............................13
9. Acronyms............................................. 14
6
1. INTRODUCTION
This 4K UHD HDMI Splitter provides an advanced solution for splitting
and distributing a single HDMI input to 2 HDMI outputs. This distribution
amp provides a high level of audio and video performance with support
for video resolutions up to 4K@60Hz (4:2:0) and high definition digital
audio formats such as LPCM 7.1, with audio sampling rates up to 192kHz,
Bitstream, and HD Bitstream. Standard EDID management functionality is
included and the System Reset function allows the unit to automatically
change the input selection on any connected, CEC enabled, TVs to the
input the unit is currently connected to.
2. APPLICATIONS
Classroom & Lecture Hall Presentations
Showrooms & Demo Rooms
Hotel Lobby Information Displays
Public Commercial Displays
3. PACKAGE CONTENTS
1×1 by 2 HDMI Splitter
1×5V/1.2A DC Power Adapter
1×Rackmount Ears (Set of 2)
1×Shockproof Feet (Set of 4)
1×Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such as a media player, video game console
or set-top box.
HDMI receiving equipment such as HDTVs, monitors or audio
amplifiers.
The use of “Premium High Speed HDMI”cables is highly
recommended.
7
5. FEATURES
HDMI 2.0 and DVI 1.0 compliant
HDCP 1.4 compliant
1 HDMI input and 2 HDMI outputs
Supports HD resolutions up to 4096×2160@60Hz (4:2:0, 8-bit)
Simultaneous display of a single 4K source on up to two 4K displays
3D signal support (with 3D source and compatible 3D TV)
Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
Bitstream, and HD Bitstream
System Reset function (CEC active source command)
EDID management control including“Standard”(Internal EDID) mode
and “TV” (External Display EDID) modes
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER IN
12
OUT EDID SYS-RST
ON OFF
SERVICE
STD TV
1 2 3 4 5 6
1POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2IN LED: This LED will illuminate to indicate that a live source has been
detected on the input port. When no source is detected the LED will
remain off.
3OUT LEDs 1~2: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no sink is
detected the LED will remain off.
4EDID SWITCH: This switch controls the EDID management behavior of
the unit. When set to “TV” mode the unit will read and store the EDID
from the sink connected to output 1 and pass it to the connected
source. When set to “STD” mode the unit will use a built in EDID
defined as 1080p@60Hz, 8-bit, LPCM 2.0.
5SYS-RST SWITCH: Controls the CEC “active source” reset functionality
of the unit. When switched to the “ON” position the unit will send a
CEC active source reset command to all connected displays every 8~10
minutes. This command requests that any connected CEC compliant
TVs switch to the input the unit is connected on.
Note: The connected TV must have CEC support enabled. Not all HDMI
TVs support this CEC command.
6SERVICE: This slot is reserved for firmware update use only.
9
6.2 Rear Panel
DC 5V
OUT
IN 12
1 2 3
1DC 5V: Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power.
2IN: Connect to HDMI source equipment such as a media player, game
console or set-top box.
3OUT 1~2: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
10
7. CONNECTION DIAGRAM
DC 5V
OUT
IN 12
DC 5V
OUT
IN 12
Media Player
Power Supply
UHDTV
HDMI Input
HDMI Outputs
UHDTV
Andere Handbücher für QU-12S
2
Inhaltsverzeichnis
Andere CYP Verstärker Handbücher
CYP
CYP AU-A300 Bedienungsanleitung
CYP
CYP AU-A200 Bedienungsanleitung
CYP
CYP CMPRO-4H2H Bedienungsanleitung
CYP
CYP PU-Q1C8H Bedienungsanleitung
CYP
CYP QU-18S Bedienungsanleitung
CYP
CYP AU-A220 Bedienungsanleitung
CYP
CYP CPRO-UHH Bedienungsanleitung
CYP
CYP CPRO-UHH Bedienungsanleitung
CYP
CYP QU-DP13EX Bedienungsanleitung
CYP
CYP CPLUS-V4H4HP Bedienungsanleitung
CYP
CYP CHDMI14 Bedienungsanleitung
CYP
CYP DCT-23 Bedienungsanleitung
CYP
CYP QU-10-4K22 Bedienungsanleitung
CYP
CYP QU-210S v1.3 Bedienungsanleitung
CYP
CYP EHD-8 Bedienungsanleitung
CYP
CYP QU-12S Bedienungsanleitung
CYP
CYP QU-18S Bedienungsanleitung
CYP
CYP AU-D820S Bedienungsanleitung
CYP
CYP CHDMI14 Bedienungsanleitung
CYP
CYP PRO-3GSDI44 Bedienungsanleitung
