CYP QU-18S Bedienungsanleitung
QU-18S
1 to 8 HDMI Distribution Amplifier
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v2.00 19/07/2019 Updated format/diagrams
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
7. Connection Diagram .......................... 10
8. Specifications...................................... 11
8.1 Technical Specifications ........................11
9. Acronyms............................................. 12
6
1. INTRODUCTION
The QU-18S Distribution Amplifier (splitter) accepts one HDMI input and
splits this signal to eight identical outputs. This device is compatible to
v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High
Definition Audio. Each buffered output can run 1080p/8-bit up to 20
metres and can also be cascaded up to 3 layers.
2. APPLICATIONS
Split a single HDMI input to 8 HDMI displays
Showroom display
Educational demo
Commercial advertisement
3. PACKAGE CONTENTS
1 By 8 HDMI Splitter
5V/6A Power Adaptor
Power Cord
Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such as DVD/Blu-ray player and output HD
display/Monitor with HDMI cables.
7
5. FEATURES
HDMI HDCP1.1 and DVI1.0 compliant Receiver.
'Deep colour' video up to 12bit, 1080p@60Hz.
Connect an HDMI source to up to eight HDMI displays simultaneously.
HDCP keysets allows each output to work independently when
connecting to a HDMI display.
Splits a HDMI source up to eight outputs without signal loss.
Supports DVI source and DVI display by using an DVI to HDMI adaptor
cable.
Supports passthrugh of LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio transmission (32-192kHz Fs sample rate).
Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
HDMI cable distance test with 1080p resolution: Input or Output
source can run up to 15m/5.1CH.
Note:
A. Cable tested with 24AWG using cables of another type may result in a
different operating distance.
B. Cable distance test included the following: PS3 120G and 37" Samsung
12-bit LCD TV.
C. Figures provided in this manual are reference figures only, actual
figures may depend on source and display used and cable
specification.
Can selected EDID source from TV or this splitter.
Fully HDCP Compliant.
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
OUTPUT
POWERSYNC
HDCPHDMI / DVI 12345
678
QU-18S
1 2 4 53
1HDMI/DVI Indicator: The LED will illuminate when the selected HDMI
input source is an HDMI output, the LED will not illuminate when the
selected HDMI input source is from a DVI output.
2SYNC Indicator: The LED will illuminate when the selected HDMI IN
connects to an HDMI or DVI output correctly.
3HDCP Indicator: The LED will illuminate when the selected HDMI
input source is HDCP-protected.
4HDMI output Indicator: The LED will illuminate when the output
sources have been connected to the HDMI output ports.
5POWER Indicator: The power LED will illuminate when power is on.
9
6.2 Rear Panel
1
HDMI IN DC 5V
12345678
EDID
STD TV
HDMI OUT
1 2 3 4
1EDID Control Switch: Default factory setting is TV. Switch to STD to
use the build-in EDID if the display has problems. When switched to
TV mode, the unit will detect the first HDMI output source’s EDID and
store it in the unit. If the first detected output source is DVI it will pass
to next source, until the first HDMI been detected.
2HDMI Input: Connect the input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top-box.
3HDMI Outputs 1 to 8: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs
will simultaneously display the source video signal.
4Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to an AC wall outlet.
10
7. CONNECTION DIAGRAM
1
HDMI IN DC 5V
12345678
EDID
STDTV
HDMI OUT
DVD or Blu-ray Player
HDTV
HDTV
HDTV
HDTV
Projector
Projector
Projector
Projector
Power
Supply
Simultaneous
HDMI Outputs
HDMI
Input
Andere Handbücher für QU-18S
2
Inhaltsverzeichnis
Andere CYP Verstärker Handbücher
CYP
CYP QU-14S-4K22 Bedienungsanleitung
CYP
CYP QU-110S-4K22 Installationshandbuch
CYP
CYP QU-12D Bedienungsanleitung
CYP
CYP QU-18S Bedienungsanleitung
CYP
CYP AU-A300 Bedienungsanleitung
CYP
CYP CS-PM Bedienungsanleitung
CYP
CYP DCT-23 Bedienungsanleitung
CYP
CYP CPRO-UHH Bedienungsanleitung
CYP
CYP PU-Q1H8C Bedienungsanleitung
CYP
CYP AU-A200 Bedienungsanleitung
CYP
CYP QU-18D Bedienungsanleitung
CYP
CYP QU-18S Bedienungsanleitung
CYP
CYP AU-A300 Bedienungsanleitung
CYP
CYP QU-12S Bedienungsanleitung
CYP
CYP PU-Q1C8H Bedienungsanleitung
CYP
CYP QU-128 Bedienungsanleitung
CYP
CYP CMSI-424L Bedienungsanleitung
CYP
CYP QU-DP13EX Bedienungsanleitung
CYP
CYP QU-4M Bedienungsanleitung
CYP
CYP CHDD-8C Bedienungsanleitung
