CYP CLUX-12CEC Bedienungsanleitung

CLUX-12CEC

1x2 HDMI 1.3 Splitter

with CEC Function

Operation Manual

CLUX-12CEC

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁle, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 December 2009

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

ﬁre, electrical shock and injury to persons.

 To prevent ﬁre or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide

ventilation.

Revision History

Version No Date Summary of Change

V1 20091227 Preliminary Release

Table of Contents

1. Introduction…………………………………………………........……….

2. Applications……………………..…………………………................….

3. Package Contents…………………………......…………….............…

4. System Requirements……...…………………..….…………........…….

5. Features…………………………………………….......……........………

6. Specications..………………………………………...........………...….

7. Operation Controls and Functions………………...……........………

7.1 Front Panel ...............................................................................

7.2 Rear Panel ………………………………………….........….….…

8. Connection and Installation …….…………………..........…..…..…...

9. Acronyms …….…………………..........…..…..….................................

1. Introduction

This HDMI v1.3 Distribution Ampliﬁer is an incredibly useful solution for your

HDMI signal distributing needs. From a single HDMI source you can transfer

Deep Color (10-bit and 12-bit) video and a new lossless compressed (Dolby

TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio with high

bandwidth up to 225MHz (6.75Gbps) to two HDMI outputs. Besides splitting

and distributing, it also does signal ampliﬁcation and equalization, providing

high I/O performance on both audio and video.

2. Applications

 Simultaneous display one HDMI source on two TVs

 Show room display control

 Educational demo

 Installation usage

3. Package Contents

 1 x 2 HDMI 1.3 Splitter

 5V DC Power supply adaptor

 Operation Manual

4. System Requirements

 Input source equipments with HDMI output connector(s)

 Output displays with HDMI input connector(s)

5. Features

 HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver .

 Deep color video up to 12bit, 1080p@(24/60)Hz.

 Simultaneously displays one HDMI source onto eight HDMI displays.

 HDCP keysets allow each output to work independently when

connecting to an HDMI display.

 Allows a single HDMI source to be shown on two displays without any

signal loss.

 Supports DVI source/display via HDMI to/from DVI adaptor cable.

 Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio transmission (32-192kHz Fs sample rate).

 Supports a wide range of PC and HDTV resolutions from VGA to UXGA

and 480i to 1080p.

 HDMI cable distance testing showed that with 1080p/8bits resolution: the

Input/Output source can reach up to 10/10 meters away, and at

1080p/12bits the I/O source can reach up to 6/10 meters.

Note:

A. Cable tested with CAT-6E /23AWG/ using cables of another type may

result in a different operating distance.

B. Cable distance test included the following: PS3 120G and 37" Samsung

12-bit LCD TV.

C. Figures provided in this manual are reference ﬁgures only, actual

ﬁgures may depend on source and display use with cable

speciﬁcation.

 Supports EDID bypass, xvYCC and CEC bypass.

 CEC function support includes one touch play & record, timer

programming, menu language, deck & device menu control, OSD

display, device OSD transfer, remote control pass through, system audio

control and system standby

 System standby will only be actived when the last TV is switched to

standby

Frequency Bandwidth 2.25Gbps (single link)

Input Port 1x HDMI female port (Type A connector)

Output Ports 2x HDMI female ports (signal link)

HDMI Cable In 1080p 8-bit (10M), 12-bit (15M)

HDMI Cable Out 1080p 8-bit (6M), 12-bit (15M)

ESD Protection Human body model: ±10kV (air-gap discharge)

±6kV (contact discharge)

PCB Stack - up 4-layer board impedance control – differential 100Ω

– Single 50Ω

Input TMDS Signal 1.2 Volts (peak-to-peak)

Input DDC Signal 5 Volts (peak-to-peak, TTL)

HDMI Output Resolution 480i ~ 1080p, 1080p24, VGA ~ UXGA

Power Supply 5VDC/1A (US/EU standards, CE/FCC/UL certiﬁed)

Dimensions (mm) 145(W) x 90(D) x 32(H)

Weight(g) 160

Chassis Material Plastic

Silkscreen Color Black

Operating Temperature 0°C ~ 40°C / 32°F~ 104°F

Storage Temperature -20°C ~60°C / -4°F ~ 140°F

Relative Humidity 20% ~ 90% RH (non-condensing)

Power Consumption 3.2W (max)

6. Specications

7. Operation Controls and Functions

7.1 Front Panel

① ② ③

①Sync LED: When an HDMI source is connected, this LED will switch on

once the splitter has established a Link with the source.

②Power LED Indicator: The LED Will turn on when power is on.

③Power Switch: Press this button to turn power on and off.

7.2 Rear Panel

② ③①

①HDMI Input: This slot is where you connect the output port of your HDMI/

DVI source (i.e., DVD, set-top box) using an HDMI/HDMI to DVI adaptor

cable.

②HDMI output 1~2: These slots connect to the HDMI displays through

the splittler, using HDMI cables. If more than one output is connected,

all corresponding HDMI outputs will simultaneously display an identical

video signal.

③Power: This slot is where you insert the 5V DC power supply after its

plugged into an AC outlet.

8. Connection and Installation

DVD

LCD TVLCD TV

Acronyms A

Acronym Complete Term

CEC Consumer Electronics Control

DTS Digital Theater Systems

DVI Digital Visual Interface

EDID Extended Display Identiﬁcation Data

HDCP High-Bandwidth Digital Content Protection

HDMI High-Deﬁnition Multimedia Interface

PC Personal Computer

PCB Printed Circuit Board

SYNC Synchronize

TMDS Transition Minimized Differential Signaling

TTL Transistor–transistor logic

UXGA Ultra Extended Graphics Array

VGA Video Graphics Array

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP CDPS-UA1H2HS Bedienungsanleitung

CYP

CYP CLUX-8M Bedienungsanleitung

CYP

CYP CLUX-1H8CAT Bedienungsanleitung

CYP

CYP PUV-1820TX-AVLC Bedienungsanleitung

CYP

CYP DT-12 Bedienungsanleitung

CYP

CYP CPLUS-V8PT Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CHDBT-1H1CE Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CHDMI-4M Bedienungsanleitung

CYP

CYP CH-526RXPL Bedienungsanleitung

CYP

CYP CPRO-U2T Bedienungsanleitung

CYP

CYP CLUX-2 Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CHDBT-1H4CPLV Bedienungsanleitung

CYP

CYP CPLUS-V4E Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP CMDP-13MDPI Bedienungsanleitung

CYP

CYP CSDI-14 Bedienungsanleitung

CYP

CYP PU-1H7HBTPL Installationshandbuch

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung