CYP PUV-1H4HPL-AVLC Bedienungsanleitung

PUV-1H4HPL-AVLC

1x4 HDBaseT™ Splitter with AVLC

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 25/07/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions .......9

6.1 Front Panel................................................... 9

6.2 Rear Panel...................................................10

6.3 IR Cable Pinouts .......................................11

6.4 RS-232 Pinout and Defaults.................11

6.5 OSD Menu ..................................................12

6.6 RS-232 Commands..................................23

7. Connection Diagram .......................... 35

8. Specifications...................................... 36

8.1 Technical Specifications ........................36

8.2 Video Specifications................................37

8.3 Audio Specifications...............................39

8.4 Cable Specifications ...............................40

8.5 HDBaseT Features....................................41

9. Acronyms............................................. 42

1. INTRODUCTION

This 1×4+1 4K UHD HDMI Splitter provides an advanced solution for

splitting and distributing a single HDMI input (up to 4K@60Hz w/ HDMI

2.0 & HDCP 2.2) to 4 HDBaseT™ outputs as well as to a single HDMI

output with analogue stereo audio breakout. The UHD source may be

distributed to any of four HDBaseT Receivers via a single Cat.5e/6/7 cable

(up to 70m at 1080p or up to 40m at 4K). Despite HDBaseT’s 10.Gbps

bandwidth limitation, 4K UHD HDMI video sources, up to and including

4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to

be processed and extended by the use of AVLC (Adaptive Visually Lossless

Compression) when connected to compatible AVLC Receivers. If the

connected HDBaseT Receiver can’t support AVLC, 4K@60Hz RGB/YUV 4:4:4

signals will be converted to YUV 4:2:0 or downscaled to 1080p based on

the detected EDID on each output.

This unit provides solid audio support, including bypassing 8 channel

LPCM digital audio as well as advanced Bitstream and HD Bitstream audio

formats via HDBaseT and HDMI. Additionally, an analogue stereo audio

breakout output is available to provide audio to local powered speakers

(LPCM 2.0 sources only).

Standard EDID management functionality is included and the PoH

(Power over HDBaseT) feature can provide power to compatible receivers,

providing greater flexibility in installations. Control is via front panel

controls with an OSD and RS-232.

2. APPLICATIONS

Household entertainment sharing

Lecture hall & classroom displays

Showroom displays

Meeting room presentations

3. PACKAGE CONTENTS

1× HDMI to HDBaseT/HDMI Splitter

1× 24V/3.75A DC Power Adapter

1× 3.5mm to IR Blaster Cable

1× Shockproof Feet (Set of 4)

1× Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as a media player, video game console

or set-top box.

Compatible HDBaseT receivers with AVLC and PoH support is

recommended.

HDMI receiving equipment such as an HDTV, monitor or audio

amplier.

The use of Premium High Speed HDMI cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

HDMI 2.0 and HDBaseT 1.0 compatible

HDCP 1.x and HDCP 2.2 compliant

1×HDMI input

4×HDBaseT and 1×HDMI outputs

Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

Note: Support of resolutions requiring bandwidth above 10.2Gbps via

HDBaseT requires a compatible AVLC receiver.

Supports 'Deep Colour' input and output up to 12-bit

Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

HDBaseT output transmits video, audio and data over a single

Cat.5e/6/7 cable and can reach distances up to 40m/131ft at 4K when

using Cat.6a/7

HDBaseT feature support: HD Video and Audio, PoH (PSE) and Control

(bi-directional RS-232 and IR pass-through)

Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond 10.2Gbps

allowing for support of sources up to 18Gbps with no loss of visual

quality

Supports automatic 4K@60Hz RGB/YUV 4:4:4 to YUV 4:2:0 conversion

or downscaling to 1080p for compatibility with non-AVLC HDBaseT

receivers based on the detected EDID on each output

Supports pass-through of all standard digital audio formats: 8 channel

LPCM, Bitstream, and HD Bitstream

High-quality DAC (Digital to Analogue audio Conversion) with local

analogue stereo audio breakout (LPCM 2.0 sources only)

Comprehensive EDID management options

Supports standard PoH from the unit to connected HDBaseT receivers

(compatible receivers only)

Note: The PoH function is designed for powering compatible Receiver

units only. Non-PoH Receivers will need their own power supply. Receivers

from other brands may not be compatible.

1U rack mounted design

Control via front panel controls with an OSD and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE MENU + ENTER POWER INPUT OUTPUT

SYNC

ABCDE

PUV-1H4HPL-AVLC

1 2 3 4 5

1SERVICE Port: This port is reserved for rmware update use only.

2CONTROL BUTTON BLOCK

MENU Button: Press to enter the OSD menu, or to back out from

menu items.

- (MINUS) Button: Press to move down or adjust selections within

OSD menus.

+ (PLUS) Button: Press to move up or adjust selections within OSD

menus.

ENTER Button: Press to conrm a selection within the OSD or to go

deeper into a menu item.

3POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

4INPUT LED: This LED will illuminate to indicate that a live source has

been detected on the input port. When no source is detected the LED

will remain o.

5OUTPUT LEDs: These LEDs will illuminate to indicate when a valid

sink has been detected on the associated output port. When no sink is

detected the LED will remain o.

6.2 Rear Panel

HDMI IN

IR IN IR OUT RS-232 DC 24V

HDMI A

BCD

CAT 5e/6/7 OUT

OUT

ANALOG

1 2 3 4 5 6

1HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box. DVI sources are supported with

the use of an HDMI to DVI adapter.

2ANALOGUE R/L Terminal Block: Connect to powered speakers or an

amplier for analogue stereo audio output.

3OUTPUT PORT BLOCK

HDMI OUT E Port: Connect to an HDMI TV, monitor, or amplier for

digital video and audio output.

CAT 5e/6/7 OUT A~D Ports: Connect to compatible HDBaseT

receivers with single Cat.5e/6/7 cables for transmission of all data

signals. PoH will also be supplied to connected compatible PD

Receivers.

4IR IN Port: Connect to an IR Extender to receive local IR control

signals and extend them to devices connected to the other end of all

HDBaseT connections. Ensure that the remote being used is within

direct line-of-sight of the IR Extender.

IR OUT Port: Connect to the provided IR Blaster to transmit IR signals

from the other end of the HDBaseT connection to devices within

direct line-of-sight of the IR Blaster.

Note: To help avoid potential simultaneous IR signal conicts, IR support

for each HDBaseT port and the local ports can be congured individually.

5RS-232 Port: Connect to a PC, laptop, or serial controllable device for

the extension of RS-232 signals between this unit and the connected

HDBaseT receivers or to send RS-232 commands to control the unit.

Note: Switching between local control and RS-232 extension is congured

within the OSD menu.

6DC 24V Port: Plug the 24V DC power adapter into this port and

connect it to an AC wall outlet for power.

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CHDMI-4M Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP CPRO-U2T Bedienungsanleitung

CYP

CYP CDPS-4S2HSS Bedienungsanleitung

CYP

CYP AU-D12 Bedienungsanleitung

CYP

CYP Clux-8 Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP CLUX-1H8CAT Bedienungsanleitung

CYP

CYP CLUX-2 Bedienungsanleitung

CYP

CYP CDPS-4KQ Bedienungsanleitung

CYP

CYP CDVI-2DDS Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CPRO-U4T Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CPLUS-V4E Bedienungsanleitung

CYP

CYP CPLUS-V8E Bedienungsanleitung

CYP

CYP CDP-13DPI Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP CLUX-12E Bedienungsanleitung

CYP

CYP CH-526RXPL Bedienungsanleitung

CYP

CYP CPLUS-V2E Bedienungsanleitung

CYP

CYP CPRO-4ER Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung